Climate Change and Future Long-Term Trends of Rainfall at North-East of Iraq

Iraq is facing water shortage problem despite the presence of the Tigris and Euphrates Rivers. In this research, long rainfall trends up to the year 2099 were studied in Sulaimani city northeast Iraq to give an idea about future prospects. The medium high （A2） and medium low B2 scenarios have been used for purpose of this study as they are more likely than others scenarios, that beside the fact that no climate modeling canter has performed GCM （global climate model） simulations for more than a few emissions scenarios （HadCM3 has only these two scenarios） otherwise pattern scaling can be used for generating different scenarios which entail a huge uncertainty. The results indicate that the average annual rainfall shows a significant downward trend for both A2 and B2 scenarios. In addition, winter projects increase/decrease in the daily rainfall statistics of wet days, the spring season show very slight drop and no change for both scenarios. However, both summer and autumn shows a significant reduction in maximum rainfall value especially in 2080s while the other statistics remain nearly the same. The extremes events are to decrease slightly in 2080s with highest decrease associated with A2 scenario. This is due to the fact that rainfall under scenario A2 is more significant than under scenario B2. The return period of a certain rainfall will increase in the future when a present storm of 20 year could occur once every 43 year in the 2080s. An increase in the frequency of extreme rainfall depends on several factors such as the return period, season of the year, the period considered as well as the emission scenario used.     

Household biomass fuel use is associated with chronic childhood malnutrition: Result from a nationwide cross-sectional survey in Bangladesh

Despite significant investment, childhood malnutrition continues to be a significant public health problem especially in least developed countries. The aim of this study was to find association between household biomass fuel (BMF) use and childhood malnutrition in Bangladesh using data from Demographic and Health Survey 2011. We included a total 6891 children under 5 years of age in the analysis. The prevalence of wasting, underweight, and stunting from BMF using household was 16.1% (n = 997; 95%CI, 15.1–17.3), 39.0% (n = 2399; 95%CI, 37.1–40.9), and 43.3% (n = 2620; 95%CI, 41.6–45.1), respectively. Underweight and stunting were significantly higher among children from households using BMF compared with the children from CF using households (underweight, biomass vs clean fuel: 39.0% vs. 23.5%, p < 0.001; stunting, biomass vs clean fuel: 43.3 vs. 31.5%, p < 0.001). The use of BMF in the household was significantly associated with underweight (OR = 1.38; 95%CI: 1.10–1.73) and stunting (OR = 1.58; 95%CI: 1.18–1.98) among children <5 years of age after adjusting possible confounders in mixed effect logistic regression analysis. This study found a significant association between chronic childhood malnutrition and household BMF use which is indicating possible alternative risk factor for malnutrition. Further prospective research is required to explore the mechanism of how BMF use results in chronic malnutrition.     

Nonlinear analysis of cable structures using the dynamic relaxation method

The analysis of cable structures is one of the most challenging problems for civil and mechanical engineers. Because they have highly nonlinear behavior, it is difficult to find solutions to these problems. Thus far, different assumptions and methods have been proposed to solve such structures. The dynamic relaxation method (DRM) is an explicit procedure for analyzing these types of structures. To utilize this scheme, investigators have suggested various stiffness matrices for a cable element. In this study, the efficiency and suitability of six well-known proposed matrices are assessed using the DRM. To achieve this goal, 16 numerical examples and two criteria, namely, the number of iterations and the analysis time, are employed. Based on a comprehensive comparison, the methods are ranked according to the two criteria. The numerical findings clearly reveal the best techniques. Moreover, a variety of benchmark problems are suggested by the authors for future studies of cable structures.     

Characterization of medical waste from hospitals in Tabriz, Iran

Medical waste has not received enough attention in recent decades in Iran, as is the case in most economically developing countries. Medical waste is still handled and disposed of together with domestic waste, creating great health risks to health-care stuff, municipal workers, the public, and the environment. A fundamental prerequisite for the successful implementation of any medical waste management plan is the availability of sufficient and accurate information about the quantities and composition of the waste generated. The objectives of this study were to determine the quantity, generation rate, quality, and composition of medial waste generated in the major city northwest of Iran in Tabriz. Among the 25 active hospitals in the city, 10 hospitals of different size, specializations, and categories (i.e., governmental, educational, university, private, non-governmental organization (NGO), and military) were selected to participate in the survey. Each hospital was analyzed for a week to capture the daily variations of quantity and quality. The results indicated that the average (weighted mean) of total medical waste, hazardous-infectious waste, and general waste generation rates in Tabriz city is 3.48, 1.039 and, 2.439 kg/bed-day, respectively. In the hospital waste studied, 70.11% consisted of general waste, 29.44% of hazardous-infectious waste, and 0.45% of sharps waste (total hazardous-infectious waste 29.89%). Of the maximum average daily medical waste, hazardous-infectious waste, and general waste were associated with N.G.O and private hospitals, respectively. The average composition of hazardous-infectious waste was determined to be 35.72% plastics, 20.84% textiles, 16.70% liquids, 11.36% paper/cardboard, 7.17% glass, 1.35% sharps, and 6.86% others. The average composition of general waste was determined to be 46.87% food waste, 16.40% plastics, 13.33% paper/cardboard, 7.65% liquids, 6.05% textiles, 2.60% glass, 0.92% metals, and 6.18% others. The average bulk densities of total medical waste, hazardous-infectious waste, and general waste were determined to be 99.58, 96.16 and 101.26 kg/m³, respectively. Significant differences were observed between the medical waste characteristics of the hospitals studied here and those reported in other studies. In conclusion, the characteristics of generated medical waste, current environmental problems and strict budgets necessitate that the implementation of efficient management, training, and segregation program be top priorities if we are to minimize the treatment and disposal costs and reduce the risks of hazardous-infectious waste in Tabriz city.     

Study of the behavior of mechanically stabilized earth (MSE) walls subjected to differential settlements

The limit equilibrium (LE) analysis has been used to design MSE walls. Presumably, the deflection of MSE walls can be limited to an acceptable range by ensuring sufficient factors of safety (FOSs) for both external and internal stabilities. However, unexpected ground movements, such as movements induced by excavations, volume changes of expansive soils, collapse of sinkholes, and consolidations of underlying soils, can induce excessive differential settlements that may influence both the stability and the serviceability of MSE walls. In this study, a numerical model, which was calibrated by triaxial tests and further by a specially-designed MSE wall tests, investigated the behavior of an MSE wall as well as the influence of various factors on the performance of the MSE wall when the wall facing settled relatively to the reinforced zone. The numerical results showed that the differential settlement would cause substantial vertical and horizontal movements for the MSE wall, as well as an increase in lateral earth pressure and geosynthetic reinforcement strain. The maximum horizontal movement and increase of the lateral earth pressure occurred at about 1.0 m above the toe. The differential settlement resulted in a critical plane that coincided with the plane of 45°+?/2. The maximum increase of the strain for each geogrid layer occurred in that plane, and the bottom layer had the greatest strain increase among all layers of reinforcement. The study further indicated that the surcharge, backfill friction angle, tensile stiffness of geogrid, reinforcement length and MSE wall height had noticeable influences on horizontal and vertical movements, and strain in geosynthetics. According to the results, the MSE wall that had a higher factor of safety would have less movements and geosynthetic strain increase. In contrast, only the friction angle, tensile stiffness and MSE wall height showed some degree of influence on the lateral earth pressure due to differential settlements.     

Comparative study of conventional and micro WEDM based on machining of meso/micro Sized Spur Gear

This paper discusses the comparison of micro machining process using conventional and micro wire electrical discharge machining (WEDM) for fabrication of miniaturized components. Seventeen toothed miniaturized spur gear of 3.5 and 1.2 mm outside diameter were fabricated by conventional and micro WEDM respectively. The process parameters for both conventional and micro WEDM were optimized by preliminary experiments and analysis. The gears were investigated for the quality of surface finish and dimensional accuracy which were used as the criteria for the process evaluation. An average surface roughness (R_a) of 50 nm and dimensional accuracy of 0.1–1 μm were achieved in micro WEDM. Whenever applied conventional WEDM for meso/micro fabrication, a R_a surface roughness of 1.8 μm and dimensional accuracy of 2–3 μm were achieved. However, this level of surface roughness and dimensional accuracy are acceptable in many applications of micro engineering. A window of conventional WEDM consisting of low energy discharge parameters is identified for micromachining.     

Precision control of a piezo-actuated micro telemanipulation system

Piezoelectric actuators are widely used in micro manipulation applications. However hysteresis nonlinearity limits accuracy of these actuators. This paper presents a novel approach for utilizing a piezoelectric nano-stage as slave manipulator of a teleoperation system. The Prandtl-Ishlinskii (PI) model is used to model actuator hysteresis in feedforward scheme to cancel out this nonlinearity. To deal with the influence of parametric uncertainties, unmodeled dynamics, and PI identification error a perturbation term is added to the slave model and apply a sliding mode based impedance control with perturbation estimation. The stability of the entire system is guaranteed by Llewellyn’s absolute stability criterion. Performance of the proposed controllers is verified through experiments.     

A mixed analytical-numerical investigation of snap-through of low arches with a power-law variable thickness

Snap-through is an instability phenomenon that occurs in arch and dome-shaped structures, wherein the structure has to move from a stable equilibrium state through an unstable path into another stable equilibrated configuration in a jumping action. In this study, a linear elastic isotropic low arch is considered as a structure with power-law variable thickness. The phenomenon is investigated by considering the equation of the deflection for the variable thickness arch, solving it with an elegant analytical technique, and finding the snap-through critical load from an extreme condition. The effect of power-law exponent and geometry of the arch centerline on critical load is investigated and the constant thickness case and a very rare case of power-law thickness variation found in literature are considered for verification.     

A review of focused ion beam sputtering

This paper reviews the applications of focused ion beam (FIB) sputtering for micro/nano fabrication. Basic principles of FIB were briefly discussed, and then empirical and fundamental models for sputtering yield, material removal rate, and surface roughness were presented and compared. The empirical models were more useful for application compared to fundamental models. Fabrication of various micro and nano structures was discussed. Trimmed atomic force microscope (AFM) tips were tested in measurement and imaging of high aspect ratio nanopillars where higher accuracy and clarity were observed. Micromilling tool fabricated using FIB sputtering was used to machine microchannels. Slicing and dwell time control approaches on FIB sputtering were presented for the fabrication of three dimensional microcavities. The first approach is preferred for practical applications. The maximum aspect ratio of 13:1 of the microstructures was achieved. The minimum size of the nanopore was in the range of 2–10 μm. Cavities of microgear of 70 μm outside diameter were sputtered with submicrometer accuracy and 2–5 nm average surface roughness. The microcavities were then filled with polymer in a subsequent micromodling process. The replicated microcomponents were inspected with scanning electron microscope where faithful duplication of accuracy and surface texture of the cavity was observed.