CHANGES IN ASPHALT CHEMISTRY AND DURABILITY DURING OXIDATION AND POLYMER MODIFICATION

The Gulf Countries' environmental conditions are very severe. The temperature zoning study indicate that more than half of Gulf areas experience a maximum seven consecutive days pavement temperature of 76°C (Al-Abdul Wahhab et al., 1997). This has resulted in damage to the road networks in the form of cracking, rutting and deformation. Polymer modification of asphalt is required to increase the resistance to permanent deformation at relatively high temperatures without adversely affecting the properties of the asphalts at low temperature. In this work chemical and performance-related properties of fresh, oxidized, and polymer modified asphalts were evaluated. The physical properties and performance characteristics of asphalts were found to depend on the chemical composition of asphalt. The interactions of polar functionalities actually present or formed during oxidative aging or due to polymer modification, influence the viscosity and related flow properties. The changes in composition of fresh, oxidized and polymer-modified asphalts can be clearly identified from Infrared spectroscopy. NMR spectroscopy enables detailed information about the Carbon-and-hydrogen-types and average molecular/structural parameters of asphalt without separating it into different components.     

Purification and characterization of a novel glucoamylase from Fusarium solani

Thermostable enzymes are currently being investigated to improve industrial processes of starch saccharification. A novel glucoamylase was purified to electrophoretic homogeneity from the culture supernatant of Fusarium solani on a fast protein liquid chromatographic system (FPLC). The recovery of glucoamylase after gel filtration on FPLC was 31.8% with 26.2-fold increase in specific activity. The enzyme had a molecular mass of 40 kDa by SDS-PAGE and 41 kDa by gel filtration. The glucoamylase exhibited optimum activity at pH 4.5. The K_cat and K_m were 441/min and 1.9 mg/ml, respectively, for soluble starch, specificity constant (K_cat/K_m) was 232. The enzyme was thermally stable at 50 °C and retained 79% activity after 60 min at this temperature. The half-life of the enzyme was 26 min at 60°C. The enzyme was slightly stimulated by Cu²⁺ and Mg²⁺ and strongly inhibited by Hg²⁺, Pb²⁺, Zn²⁺, Ni²⁺ and Fe³⁺.     

Cellular uptake properties of a 2''-amino/2''-O-methyl-modified chimeric hammerhead ribozyme targeted to the epidermal growth factor receptor mRNA

PURPOSE: Rhabdomyosarcomas (RMS) are heterogeneous in their clinical presentation, histology, and cytogenetics. The growth of some RMS cells has been found to be regulated by the tyrosine kinase insulin-like growth factor (IGF) type I receptor. However, RMS cells exhibit variable sensitivity to inhibitors of tyrosine kinases and IGF receptors. Collectively, these heterogeneous features suggest that differences exist in the growth regulatory pathways of RMS. The objective of this study is to identify active tyrosine kinase signal transduction pathways in embryonal and alveolar RMS cells. METHODS: RMS tumor samples and cell lines representing both embryonal and alveolar histologic subtypes have been analyzed by immunoprecipitation and immunoblotting techniques to characterize phosphotyrosyl protein patterns and to identify tyrosine phosphorylated proteins. RESULTS: RMS cells can be characterized based on the patterns of phosphotyrosyl proteins, including the phosphorylation status of the catenin-like protein Cas1 and the signal adapter protein SHC, and the activation of IGF type I receptor signaling cascades including the formation of SHC-GRB2 signal protein complexes and MAP kinase activation. CONCLUSIONS: Rhabdomyosarcomas, especially the embryonal histologic subtype, are heterogeneous at the level of tyrosine kinase signal transduction. It will be important to characterize the growth regulatory pathways active in individual RMS tumors before targeting molecular therapies to this malignancy.     

Formation and Characterization of Titanium Modif Aluminide Coatings on IN738LC

HISTORICALLY superalloys have been used in gasturbine applications with a protective coating to combatoxidation problems in aero engines and hot corrosionproblems in industrial and marine engines.Theprotective coatings used are predominantly of thediffusion type produced by variety of techniques suchas pack cementation,chemical vapor deposition,slurryfusion and hot dipping[1,2].The purpose of this typeof coatings is to increase the amount of Al at thesurface of a component,so that a protec…     

Biologically‐synthesised ZnO/CuO/Ag nanocomposite using propolis extract and coated on the gauze for wound healing applications

Wound healing has long been recognised as a major clinical challenge for which stablishing more effective wound therapies is necessary. The generation of metallic nanocomposites using biological compounds is emerging as a new promising strategy for this purpose. In this study, four metallic nanoparticles (NPs) with propolis extract (Ext) and one without propolis including ZnO/Ext, ZnO/Ag/Ext, ZnO/CuO/Ext, ZnO/Ag/CuO/Ext and ZnO/W were prepared by microwave method and assessed for their wound healing activity on excision experimental model of wounds in rats. The developed nanocomposites have been characterised by physico‐chemical methods such as X‐ray diffraction, scanning electron microscopy, diffuse reflectance UV–vis spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and Brunauer–Emmett–Teller analyses. The wounded animals treated with the NPs/Ext in five groups for 18 days. Every 6 days, for measuring wound closure rate, three samples of each group were examined for histopathological analysis. The prepared tissue sections were investigated by haematoxylin and Eosin stainings for the formation of epidermis, dermis and muscular and Masson''s trichrome staining for the formation of collagen fibres. These findings toughly support the probability of using this new ZnO/Ag/Ext materials dressing for a wound care performance with significant effect compared to other NPs.Inspec keywords: nanomedicine, X‐ray diffraction, II‐VI semiconductors, visible spectra, ultraviolet spectra, nanocomposites, biomedical materials, proteins, wounds, nanoparticles, scanning electron microscopy, nanofabrication, skin, zinc compounds, silver, antibacterial activity, Fourier transform infrared spectra, copper compounds, molecular biophysicsOther keywords: propolis, wound healing applications, effective wound, metallic nanocomposites, biological compounds, metallic nanoparticles, microwave method, wound healing activity, physico‐chemical methods, Fourier transform infrared spectroscopy, diffuse reflectance UV‐vis spectroscopy, Brunauer‐Emmett‐Teller analyses, wounded animals, wound closure rate, wound care performance, histopathological analysis, scanning electron microscopy, X‐ray diffraction, thermogravimetric analysis, haematoxylin, Eosin stainings, Masson trichrome, epidermis, muscular trichrome, collagen fibres, time 18.0 d, time 6.0 d, ZnO‐CuO‐Ag     

Subunit exchange of lens alpha-crystallin: a fluorescence energy transfer study with the fluorescent labeled alphaA-crystallin mutant W9F as a probe

A chemical study of the common Caribbean sea plume Pseudopterogorgia acerosa from Puerto Rico has produced two previously undescribed secondary metabolites. One of them, 1, is a new representative of the pseudopterane family of diterpenes possessing the uncommon 3,4;5,6 diepoxyfuran moiety. The other metabolite, 2, is a rare norcembranolide diterpene. Their chemical structures, including relative stereochemistry, were established by detailed analysis of the spectral data in addition to NMR spectral comparisons with known pseudopterane and cembrane models.     

Yield response and nitrogen utilization efficiency by drip-irrigated potato

Two field experiments were conducted in the Jordan Valley to evaluate potato response to N fertigation. Nitrogen as ammonium sulphate was supplied through irrigation water (fertigation) at rates of 0, 35, 70 and 105 mg N l^-1. Soil N application treatment equivalent to the fertigation treatment of 70 mg N l^-1 was included. ¹⁵N labelled ammonium sulphate was used to evaluate the N recovery and utilization efficiency. Yield increased by the N rate. The soil N application gave higher yield than the zero N and lower than the fertigated treatments. The increase in yield was due to the increase in the size of the tubers. The specific gravity was the highest with the zero N. The index ratios of potato tubers were similar with all treatments. The N derived from fertilizers by both tubers and shoots, increased with the N rate regardless of the method of application. The soil application treatments had fertilizer utilization as high as the fertigation treatments and produced total tuber yield not significantly different from that obtained by the fertigation treatment with similar rate. This might be attributed to the poor fertilizer distribution in the root zone in the fine textured soil. The low value of the fertilizer utilization of the plant receiving the ¹⁵N in the preceding season suggested possibilities of rapid transformation and immobilization by the soil microorganisms.     

Autoscan shift: A new core-rock data integration technique to overcome the shortcomings of conventional regression

For integrating rock mechanical data from cores and well logs, a new, two-stage technique is presented. The first stage consists of a less known criterion for filtering spurious data (outliers). It was developed and applied in astrophysics by Chauvenet [Chauvenet, W., 1863. Theory and Use of Astronomical Instruments: Method of Least Squares, pp. 558–566] but not applied in the E&P industry. The second stage is a new calibration method devised by us. The new calibration method has a unique characteristic: it preserves the shape of the depth vs. parameter profile of well logs.The conventional calibration technique uses the well-known Least Squares-based regression technique. This usually results in some distortion of the shape of the log-based data profile. The distortion is more serious whenever the coefficient of correlation is low, and can entirely mask the true variability of the measured parameter as obtained from the well log. In addition, the presence of any spurious data in the core data itself can render the calibration process meaningless.Calibrating the continuous log-based parameters (e.g., rock-mechanical elastic moduli) with the help of a limited number of core-based data is a routine job in designing mud-weight window for a stable borehole, ensuring sand-free hydrocarbon production, and productivity enhancement by hydraulic fracturing. The proposed technique will help make more accurate designs of these important exploration and production operations.The proposed technique can be commercialized as an independent package or by embedding it in an existing petroleum engineering software package. A preliminary version has already been delivered to Saudi Aramco to help design hydraulic fracturing that is currently being performed in the Hawiya/Haradh Gas Initiative.     

Optimisation study of large‐scale enzymatic synthesis of oleyl oleate,a liquid wax ester,by response surface methodology

An optimisation study of the large‐scale enzymatic synthesis of a liquid wax ester from oleic acid and oleyl alcohol using Novozym 435 was carried out. Investigations were performed in batch mode with a stirred tank reactor (STR) with one multi‐bladed impeller. Response surface methodology (RSM) based on a five‐level, three‐variable central composite rotatable design (CCRD) was used to evaluate the interactive effects of various parameters. The parameters are amount of enzyme (A) (90–120 g), impeller speed (B) (100–400 rpm) and temperature (C) (40–60 °C). The optimum conditions derived via RSM at a fixed reaction time of 1 h were successfully optimised as A = 104 g, B = 388.0 rpm and C = 49.7 °C. The actual experimental yield was 96.7% under the optimum conditions, which compared well with the maximum predicted value of 97.6%. Copyright © 2005 Society of Chemical Industry     

Ion-exchange kinetics and electrical conductivity studies of polyaniline Sn(IV) tungstoarsenate; (SnO2)(WO3)(As2O5)4(C6H5NH)2·nH2O: a new semi-crystalline ‘polymeric-inorganic’ composite cation-exchange material

A new and novel electrically conducting ‘polymeric-inorganic’ composite cation-exchange material; polyaniline Sn(IV) tungstoarsenate was prepared by incorporating polyaniline into inorganic ion-exchanger material. It possessed improved ion-exchange capacity, high chemical and thermal stabilities, reproducibility and selectivity for some specific metal ions. Kinetic study of exchange for some divalent metal ions of alkaline earths and transition metals was carried out under the conditions favoring a particle diffusion-controlled ion-exchange phenomenon and some physical parameters such as self diffusion coefficient D₀, energy of activation E_a and entropy of activation ΔS* were determined. The temperature dependence of electrical conductivity of this composite material with increasing temperatures was measured by using 4-in-line-probe DC electrical conductivity measuring-technique. The conductivity values lie in the semiconductor region, i.e. in the range of 10⁻³ S cm⁻¹ that follow the Arrhenius equation. The energy of activation of electrical conduction for the composite was also calculated.