One-to-Many and Many-to-One Optical Chaos Communications Using Semiconductor Lasers

A theoretical construction of one-to-many (OTM) and many-to-one (MTO) chaos synchronization communications using semiconductor lasers is presented. One center laser provides strong injections (strong link) to other side lasers, and the side lasers also provide weak injections (weak link) to the center one. Simulation results show that the side lasers synchronize with the center laser through injection-locking. In addition, messages transmitted via the strong links or the weak links experience strong chaos pass filtering, enabling us to realize OTM and MTO communications.     

Investigation of Mechanical and Electrical Characteristics for Cracked Conductive Particle in Anisotropic Conductive Adhesive (ACA) Assembly

In an anisotropic conductive adhesive (ACA) assembly, the electrical conduction is usually achieved with the conductive particles between the bumps of integrated circuit (IC) and corresponding conductive tracks on the glass substrate. Fully understanding of the mechanical and electrical characteristics of ACA particles can help to optimize the assembly process and improve the reliability of ACA interconnection. Most conductive particles used in the ACA assembly are with cracks in the metal coating of the particles after the ACA bonding. This paper introduced the fracture analysis by applying the cohesive elements in the numerical model of the nickel-coated polymer particle and further simulating the cracks initiation and propagation in the nickel coating during the ACA bonding. The simulation results showed that the stress distribution on the nickel-coated particle with cracks was significantly different from that on the nickel-coated particle without crack, indicating that the stress analysis by taking the crack into consideration is very important for the reliability assessment of the ACA interconnection. The stress analysis of cohesive elements indicated that the cracks initiated at the central area of the nickel coating and propagated to the polar area. Furthermore, by the introduction of a new parameter of the virtual resistance, a mathematical model was established to describe the electrical characteristics of the nickel-coated particle with cracks. The particle resistance of the nickel-coated particle with cracks was found to be much higher than that of the particle without crack in the optimized bonding pressure range, indicating that it is necessary to take the crack into consideration for the particle conduction analysis as well. Therefore, the fracture analysis on the conductive particle by taking the crack into consideration could accurately evaluate the reliability of ACA interconnection and avoid serious reliability issues.     

优化移动多媒体传输链的功耗

消费者对于移动多媒体的需求是毫无疑问的，满足这些需求的技术已经开发成功，对于设计人员而言，剩下的问题就是如何利用这些技术，并将成功的产品带入市场。本文将讨论如何减省移动多媒体设备内关键元件的功耗，此外也会对现今移动多媒体设备设计人员所面对的工程挑战作出概括的分析，并就目前及新涌现的硅技术，提出可克服这些工程挑战的解决方案。     

Φ4.0m×60m回转窑辐射热的应用

水泥厂回转窑简体内砌筑了耐火砖隔热,但仍有部分热通过简体以辐射的形式散失到大气中,吸收利用这部分辐射热也是一项节能减排的举措.     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

计算机高速并行通信的实现方案

利用CPLD芯片实现单片机与ISA总线接口之间的高速并行通信，给出系统的总体设计方法及程序框图。采用这种通信方式，在12MHz晶振的MCS51单片机控制的数据采集系统中，可以满足与PCI04 ISA总线接口实时通信的要求，通信速率达200khit／s。在开发工具MAX plusⅡ下，完成了整个设计的输入、编译和仿真，达到了预期效果。本设计方案能够推广应用到计算机的高速并行通信中。     

TM1300多媒体DSP的百兆以太网通信接口的设计实现

主要研究TM1300多媒体数字信号处理器(DSP)在pSOS嵌入式操作系统下的100 Mbit/s高速以太网接口的设计与实现.硬件方面,介绍了TM1300系统与RTL8139以太网驱动芯片通过PCI总线互连的实现方式,重点介绍了其中PCI仲裁器的设计和PCI配置空间地址的设置方法;软件方面,介绍了在DSP端内嵌的pSOS操作系统下开发软件驱动RTL8139芯片的方法,重点描述了pSOS的pNA 网络组件的NI接口、RTL8139芯片收发数据的控制方式、驱动程序的发送缓存管理、TM1300访问PCI空间的途径以及内存与数据缓存一致性等要点.最后从速率、可靠性、效率3个方面对实现的以太网通信接口进行了测试,给出了详细的实测结果.测试结果显示,与基于RTL8029芯片开发的以太网接口相比,各项性能均有较大提高.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

TCP/IP网络的动态模型描述

拥塞现象成为TCP/IP网络发展面临的一个重要问题。因此，拥塞控制对TCP/IP网络的鲁棒性和稳定性具有重要作用。目前，网络拥塞控制策略主要包括两类：端到端的控制机制，如TCP拥塞控制算法；网络内部的主动队列管理(AQM)策略。但由于缺乏对网络系统动态特性的了解，这些拥塞控制策略大都基于专家经验，并没有建立完整的理论分析框架。为此，本文从数据流的角度出发，通过建立网络基本单元状态方程模型来实现IP网络系统的数学解析模型，然后用混杂系统来描述TCP带有拥塞控制策略的数据传输过程，建立了TCP/IP网络的动态模型，为网络系统中动态性能的分析、拥塞控制策略的设计奠定了基础。实验结果表明，该数学模型与NS仿真实验的结果相一致。     

高精度非电起爆系统在围堰爆破拆除中的应用

高精度非电起爆系统在雷管精度、起爆可靠性、爆破减震作用等方面都有很大提高。本文介绍了构皮滩水电站导流洞进口围堰爆破拆除中采用非电起爆系统的情况,证明在水电工程的某些特殊爆破部位采用高精度非电起爆系统具有一定的优势。