Self-reinforcing mechanisms for cellularisation: a longitudinal case study

Firms that adopt cellular manufacturing (CM) often need to restructure their products, personnel, equipment, factory management and organisation culture. Despite voluminous literature on CM, only a few case studies related to cellularisation exist. Therefore, to enhance understanding in this area, this paper presents a longitudinal case study on cellularisation in an electronic assembly plant. Six years of data were collected from the observations and discussions of an industrialist and an academician. Events instrumental to the persistence of CM were highlighted, with reference to path dependence analysis. Cellularisation is not entirely evolutionary or teleological but is an interplay of the two; it is significantly influenced by the positive feedback of self-reinforcing mechanisms after departing from critical junctures. The observed self-reinforcing mechanisms were expounded and divided into six categories.     

Template‐Free Fabrication of Mesoporous Alumina Nanospheres Using Post‐Synthesis Water‐Ethanol Treatment of Monodispersed Aluminium Glycerate Nanospheres for Molybdenum Adsorption

This work reports the template‐free fabrication of mesoporous Al₂O₃ nanospheres with greatly enhanced textural characteristics through a newly developed post‐synthesis “water‐ethanol” treatment of aluminium glycerate nanospheres followed by high temperature calcination. The proposed “water‐ethanol” treatment is highly advantageous as the resulting mesoporous Al₂O₃ nanospheres exhibit 2–4 times higher surface area (up to 251 m² g^?1), narrower pore size distribution, and significantly lower crystallization temperature than those obtained without any post‐synthesis treatment. To demonstrate the generality of the proposed strategy, a nearly identical post‐synthesis “water treatment” method is successfully used to prepare mesoporous monometallic (e.g., manganese oxide (MnO₂)) and bimetallic oxide (e.g., CuCo₂O₄ and MnCo₂O₄) nanospheres assembled of nanosheets or nanoplates with highly enhanced textural characteristics from the corresponding monometallic and bimetallic glycerate nanospheres, respectively. When evaluated as molybdenum (Mo) adsorbents for potential use in molybdenum‐99/technetium‐99m (⁹⁹Mo/^99mTc) generators, the treated mesoporous Al₂O₃ nanospheres display higher molybdenum adsorption performance than non‐treated Al₂O₃ nanospheres and commercial Al₂O₃, thereby suggesting the effectiveness of the proposed strategy for improving the functional performance of oxide materials. It is expected that the proposed method can be utilized to prepare other mesoporous metal oxides with enhanced textural characteristics and functional performance.     

Nutratherapeutics approach against cancer: tomato‐mediated synthesised gold nanoparticles

In this study, an eco‐friendly biosynthesis of stable gold nanoparticles (T‐GNPs) was carried out using different concentrations of tomato juice (nutraceuticals) as a reducing agent and tetrachloroauric acid as a metal precursor to explore their potential application in cancer therapeutics. The synthesis of T‐GNPs was monitored by UV‐visible absorption spectroscopy, which unveiled their formation by exhibiting the typical surface plasmon absorption maxima at 522 nm. The size of T‐GNPs was found to be 10.86 ± 0.6 nm. T‐GNPs were characterised by dynamic light scattering, zeta potential, transmission electron microscopy analysis and Fourier transform infrared spectroscopy. T‐GNPs were further investigated for their anti‐cancer activity against human lung carcinoma cell line (A ₅₄₉) and human cervical cancer cell line wherein the IC₅₀ values were found to be 0.286 and 0.200 mM, respectively. T‐GNPs inhibited the growth of cancer cells by generating ROS and inducing apoptosis. T‐GNPs were found highly effective by virtue of their size, metallic property and capping molecules. Thus, this study opens up the prospects of using nutraceutical (tomato juice) as nutratherapeutic agent (T‐GNPs) against critical diseases like lung cancer and cervical cancer.Inspec keywords: gold, nanoparticles, particle size, cancer, ultraviolet spectra, visible spectra, electrokinetic effects, transmission electron microscopy, Fourier transform infrared spectra, cellular biophysics, spectrochemical analysis, nanomedicine, nanofabricationOther keywords: tomato‐mediated synthesised gold nanoparticles, tomato juice, reducing agent, tetrachloroauric acid, cancer therapeutics, UV‐visible absorption spectroscopy, surface plasmon absorption, dynamic light scattering, zeta potential, transmission electron microscopy analysis, Fourier transform infrared spectroscopy, human lung carcinoma cell line, anticancer activity, human cervical cancer cell line, nutratherapeutic agent, lung cancer, Au     

An Improved Hybrid Indoor Positioning Algorithm via QPSO and MLP Signal Weighting

Accurate location or positioning of people and self-driven devices in large indoor environments has become an important necessity The application of increasingly automated self-operating moving transportation units, in large indoor spaces demands a precise knowledge of their positions. Technologies like WiFi and Bluetooth, despite their low-cost and availability, are sensitive to signal noise and fading effects. For these reasons, a hybrid approach, which uses two different signal sources, has proven to be more resilient and accurate for the positioning determination in indoor environments. Hence, this paper proposes an improved hybrid technique to implement a fingerprinting based indoor positioning, using Received Signal Strength information from available Wireless Local Area Network access points, together with the Wireless Sensor Networks technology. Six signals were recorded on a regular grid of anchor points, covering the research space. An optimization was performed by relative signal weighting, to minimize the average positioning error over the research space. The optimization process was conducted using a standard Quantum Particle Swarm Optimization, while the position error estimate for all given sets of weighted signals was performed using a Multilayer Perceptron (MLP) neural network. Compared to our previous research works, the MLP architecture was improved to three hidden layers and its learning parameters were finely tuned. These experimental results led to the 20% reduction of the positioning error when a suitable set of signal weights was calculated in the optimization process. Our final achieved value of 0.725 m of the location incertitude shows a sensible improvement compared to our previous results.     

Simulation model for natural gas transmission pipeline network system

This paper focuses on developing a simulation model for the analysis of transmission pipeline network system (TPNS) with detailed characteristics of compressor stations. Compressor station is the key element in the TPNS since it provides energy to keep the gas moving. The simulation model is used to create a system that simulates TPNS with different configurations to get pressure and flow parameters. The mathematical formulations for the TPNS simulation were derived from the principles of flow of fluid through pipe, mass balance and compressor characteristics. In order to determine the unknown pressure and flow parameters, a visual C++ code was developed based on Newton–Raphson solution technique. Using the parameters obtained, the model evaluates the energy consumption for various configurations in order to guide for the selection of optimal TPNS. Results from the evaluations of the model with the existing TPNS and comparison with the existing approaches showed that the developed simulation model enabled to determine the operational parameters with less than 10 iterations. Hence, the simulation model could assist in decisions regarding the design and operations of the TPNS.     

Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA

In this study, Artificial Neural Network (ANN) and Simulated Annealing (SA) techniques were integrated labeled as integrated ANN-SA to estimate optimal process parameters in abrasive waterjet (AWJ) machining operation. The considered process parameters include traverse speed, waterjet pressure, standoff distance, abrasive grit size and abrasive flow rate. The quality of the cutting of machined-material is assessed by looking to the roughness average value (R_a). The optimal values of the process parameters are targeted for giving a minimum value of R_a. It was evidence that integrated ANN-SA is capable of giving much lower value of R_a at the recommended optimal process parameters compared to the result of experimental and ANN single-based modeling. The number of iterations for the optimal solutions is also decreased compared to the result of SA single-based optimization.     

A data fusion framework with novel hybrid algorithm for multi-agent Decision Support System for Forest Fire

In this study Forest Fire Decision Support System (FOFDESS) which is a multi-agent Decision Support System for Forest Fire has been presented. Depending on the existing meteorological state and environmental observations, FOFDESS does the fire danger rating by predicting the forest fire and it can also approximate fire spread speed and quickly detect a started fire. Some data fusion algorithms such as Artificial Neural Network (ANN), Naive Bayes Classifier (NBC), Fuzzy Switching (FS) and image processing have been used for these operations in FOFDESS. These algorithms have been brought together by a designed data fusion framework and a novel hybrid algorithm called NABNEF (Naive Bayes Aided Neural-Fuzzy Algorithm) has been improved for fire danger rating in FOFDESS. In this state, FOFDESS is an integrated system which includes the dimensions of prediction, detection and management. As a result of the experiments, it was found out that FOFDESS helped determining the most accurate strategy for fire fighting by producing effective results.     

Dynamic hybrid automatic repeat request (DHARQ) for WiMAX – Mobile multihop relay using adaptive power control

Wireless multihop network is currently attracting much attention as a new wireless broadband access technology due to numerous benefits. This work proposes a power control scheme for WiMAX multihop relay system. In contrast to existing power control and optimization approaches, our proposed method uses an adaptive Channel Quality Measurement for a relay station to reduce interferences to other mobile station (MS) or relay station (RS) within the same cell and hence increase the number of hops per link and consequently maximize the spatial reuse. The proposed power control is applied to a new dynamic HARQ algorithm for adaptive channel quality enhancement. Simulation results have indicated that the proposed approach achieves superior BER/PER performance enhancement in comparison to previous related works.     

Leader-follower consensus control of Lipschitz nonlinear systems by output feedback

This paper deals with the leader-follower consensus problem of Lipschitz nonlinear systems under fixed directed communication networks. Both state and output feedback control are proposed based on state and output measurements of neighbouring agents, respectively. Laplacian matrix features are explored for the stability analysis, and the sufficient conditions are derived to solve the consensus problem. Finally, simulation results are included to demonstrate the effectiveness of the output-based consensus controller.