Effect of suspension characteristics on the performance of thermal barrier coatings deposited by suspension plasma spray

This paper investigates the influence of suspension characteristics on microstructure and performance of suspensions plasma sprayed (SPS) thermal barrier coatings (TBCs). Five suspensions were produced using various suspension characteristics, namely, type of solvent and solid load content, and the resultant suspensions were utilized to deposit five different TBCs under identical processing conditions. The produced TBCs were evaluated for their performance i.e. thermal conductivity, thermal cyclic fatigue (TCF) and thermal shock (TS) lifetime. This experimental study revealed that the differences in the microstructure of SPS TBCs produced using varied suspensions resulted in a wide-ranging overall TBC performance. All TBCs exhibited thermal conductivity lower than 1 W/(m. K) except water-ethanol mixed suspension produced TBC. The TS lifetime was also affected to a large extent where 10 wt % solid loaded ethanol and 25 wt % solid loaded water suspensions produced TBCs exhibited the highest and the lowest lifetime, respectively. On the contrary, TCF lifetime was not as significantly affected as thermal conductivity and TS lifetime, and all ethanol suspensions showed marginally better TCF lifetime than water and ethanol-water mixed suspensions deposited TBCs.     

An efficient bi-layer content based image retrieval system

Multimedia Tools and Applications - Large amount of multi-media content, generated by various image capturing devices, is shared and downloaded by millions of users across the globe, every second....     

Facile synthesis,characterization, and ab-initio DFT simulations of energy efficient NN′ dialkyl 1,4 benzene dicarboxamide monomers recovered from PET bottle waste

Aminolytic chemical recycling is performed for obtaining NN′ diethyl 1,4 benzene dicarboxamide, NN′ dibutyl 1,4 benzene dicarboxamide, and NN′ dihexyl 1,4 benzene dicarboxamide from Polyethylene terephthalate bottle waste. The compounds were characterized through Fourier transform Infrared spectroscopy, Raman spectroscopy, UV–Visible spectroscopy, ¹H NMR, ¹³C NMR, mass spectrometry, and elemental analysis. Thermal properties were also analyzed with the help of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Density Functional Theory (DFT) study has been performed at GGA-BLYP (Becke's and Lee–Yang–Parr) functional using SZ basis set to investigate the vibrational frequencies and physical parameters. Experimental vibrational frequencies were found in good accord with the experimental values. Calorific values of the products have been determined using bomb calorimeter as per standard ASTM D240. The values have been correlated with increment of methylene units from NN′ diethyl BdCA to NN′ dihexyl BdCA using standard molar enthalpies of carbon and hydrogen. SEM and EDX analysis of the char residues after combustion has also been carried out to insight the effect of N-alkyl chain length on calorific values. The calorific values of the recovered compounds are comparable to commercial solid fuels and the compounds may find potential applications in aerospace industry.     

Impact Properties of Copper-Alloyed and Nickel-Copper Alloyed ADI

The influence of austenitization and austempering parameters on the impact properties of copper-alloyed and nickel-copper-alloyed austempered ductile irons (ADIs) has been studied. The austenitization temperature of 850 and 900 °C have been used in the present study for which austempering time periods of 120 and 60 min were optimized in an earlier work. The austempering process was carried out for 60 min for three austempering temperatures of 270, 330, and 380 °C to study the effect of austempering temperature. The influence of the austempering time on impact properties has been studied for austempering temperature of 330 °C for time periods of 30-150 min. The variation in impact strength with the austenitization and austempering parameters has been correlated to the morphology, size and amount of austenite and bainitic ferrite in the austempered structure. The fracture surface of ADI failed under impact has been studied using SEM.     

A Transparent Photonic Artificial Visual Cortex

Mimicking brain‐like functionality with an electronic device is an essential step toward the design of future technologies including artificial visual and memory applications. Here, a proof‐of‐concept all‐oxide‐based (NiO/TiO₂) highly transparent (54%) heterostructure is proposed and demonstrated, which mimics the primitive functions of the visual cortex. Specifically, orientation selectivity and spatiotemporal processing similar to that of the visual cortex are demonstrated using direct optical stimuli under the self‐biased condition due to photovoltaic effect, illustrating an energy‐efficient approach for neuromorphic computing. The photocurrent of the device can be modulated from zero to 80 µA by simply rotating the slit by 90°. The device shows fast rise and fall times of 3 and 6 ms, respectively. Based on Kelvin probe force measurements, the observed results are attributed to a lateral photovoltaic effect. This highly transparent, self‐biased, photonic triggered device paves the way for the advancement of energy‐efficient neuromorphic computation.     

Femtojoule-Power-Consuming Synaptic Memtransistor Based on Mott Transition of Multiphasic Vanadium Oxides

To realize the potential of Mott transition of multiphasic vanadium oxides (VO_x) for memory applications, the development of VO_x memtransistors on SiO₂ wafer is introduced. Through electrical characterizations, the volatile memory behaviors of the VO_x memtransistors are observed in both two- and three-terminal measurements. Their capacitive memory and resistive switching mechanisms are strongly related to the mixed VO_x/SiO₂ interface (called VSiO_x). VSiO_x supports the Mott transition in VO_x at low bias voltages (<0.5 V), leading to the low power consumption of the memtransistor. Moreover, the fast switching time (≈35 ns) and tunable memory retention with the synaptic functions (potentiation and depression) of the memtransistors (by using the gate and drain biases) are demonstrated. Overall, the findings open up major opportunities for constructing ultrafast and femto-joule power-consuming neuromorphic devices.     

Grain Boundaries in Cu(In,Ga)Se2: A Review of Composition–Electronic Property Relationships by Atom Probe Tomography and Correlative Microscopy

Cu(In,Ga)Se₂ thin-film solar cells have attracted significant research interest in recent decades due to their high efficiency in converting solar energy into electricity for enabling a sustainable future. Although the Cu(In,Ga)Se₂ absorber can be grown as a single crystal, its polycrystalline form is dominating the market not only due to its lower costs, but also due to its unexpectedly higher cell efficiency. However, this absorber contains a high fraction of grain boundaries. These are structural defects where deep-trap states can be localized leading to an increase in recombination activity. This controversy is mirrored in the existing literature studies where two main contradictory believes exist: 1) to be crucial grain boundaries in Cu(In,Ga)Se₂ absorber are anomalous, being benign in terms of cell performance, and 2) grain boundaries are regions characterized by an increased recombination activity leading to deteriorated cell performance. Therefore, the present review tackles this issue from a novel perspective unraveling correlations between chemical composition of grain boundaries and their corresponding electronic properties. It is shown that features such as Cu depletion/In enrichment, segregation of 1-2at.% of alkali dopants, and passivation by a wide-bandgap or type inversion at grain boundaries are crucial ingredients for low open-circuit voltage loss and, hence, for superior cell performance.     

A systematic method to synthesize all dividing wall columns for n‐component separation—Part I

We present an easy‐to‐use step‐wise procedure to synthesize an initial‐dividing wall column (i‐DWC) from any given n‐component basic distillation column sequence or its thermally coupled derivative. The procedure to be used is dependent on the nature of the distillation column sequence that is to be converted into a DWC, and comprises of an intuitive set of steps that we demonstrate through examples. It is noteworthy that, even for a ternary distillation, 15 potentially useful DWCs, some of which had been missing from the literature, have now been identified. This work significantly expands the search space of useful DWCs to separate any given multicomponent mixture. © 2017 American Institute of Chemical Engineers AIChE J, 64: 649–659, 2018