Increased concentrations of octachlorodibenzo-p-dioxin in cases with breast cancer--results from a case-control study

Organochlorines are persistent and highly lipophilic environmental contaminants which bioaccumulate in the food chain. Some of these chemicals, 2,2-bis(p-chlorophenyl)-1,1,1-trichloroethane (DDT) and polychlorinated biphenyls (PCBs), have been suggested to be of significance in the aetiology of breast cancer. 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is an anti-oestrogen in animal studies and should be thus lower the risk of breast cancer. The other isomers of polychlorinated dibenzo-p-dioxins (PCDDs) or the chemically related polychlorinated dibenzofurans (PCDFs) have not been tested regarding carcinogenesis of the breast. The purpose of this study was to investigate whether PCDDs or PCDFs influence the risk for breast cancer. Consecutive patients who underwent surgery for a breast disease between 1993 and 1995 were recruited for the study. Cases were 22 patients with infiltrative breast cancer and controls were 19 patients operated for a benign breast disease during the same time period. Approximately 10 g of breast tissue free from tumour was taken from the specimen and frozen until analysis. Fat was extracted, cleaned and analysed with a high-resolution gas chromatograph coupled to a high-resolution mass spectrometer. Median concentrations of octachlorinated dibenzo-p-dioxin (OCDD) were 598 (170-14,880) and 396 (103-1,847) pg/g lipid in the cases and in the controls, respectively. In a multivariate logistic regression analysis controlling for other risk factors for breast cancer increased odds ratio (OR) was obtained for OCDD: 401-1000 pg/g lipid yielded OR 3.8, 95% confidence interval (CI) 0.4-39, > 1000 pg/g lipid gave OR 5.2, CI 0.4-72. When the lipid OCDD variable was examined as a continuous risk factor there was a 1.09 (9%), CI 0.95-1.25, increase in the adjusted OR for breast cancer per 100 unit (pg/g lipid) increase in OCDD. No differences were found between cases and controls for the other six tested PCDDs. Mean concentration of TCDD was in the cases 3.6 (1.0-7.9) and in the controls 3.3 (1.1-6.3) pg/g lipid. For PCDFs no significant differences were found between cases and controls. The results were not changed if oestrogen or progesterone receptor status, S-phase fraction and DNA ploidy were considered. Breast tissue concentration of OCDD was increased in cancer patients, whereas the concentrations of other PCDDs and PCDFs were equal in cases and controls.     

Deformation and fracture of glass bead/ CTBN-rubber/epoxy composites

Carboxyl-terminated butadiene-acrylonitrile-rubber decreases modulus and yield stress of the studied epoxy but increases fracture toughness. The addition of glass bead compensates for the loss in modulus but has little effect on yield stress. However, it significantly contributes to the fracture toughness by providing additional mechanisms for toughening of both the unmodified and rubber-modified epoxy. For the toughened epoxies studied, fracture surfaces gave only limited information on fracture mechanisms since significant energy absorption also occurs in the material below the fracture surface. Suggestions for suitable material compositions for fiber composite matrices are given.     

Sequence capture-PCR improves detection of mycobacterial DNA in clinical specimens

The rapid identification of mycobacterial DNA in clinical samples by PCR can be useful in the diagnosis of tuberculous infections, but several large studies have found that the sensitivity of this approach is not better than that of culture. In order to improve the sensitivity of detection of mycobacterial DNA in clinical specimens from patients with paucibacillary forms of tuberculosis, we have developed a procedure permitting the specific capture of mycobacterial DNA in crude samples prior to amplification, thereby concentrating the target sequences and removing irrelevant DNA and other potential inhibitors of the amplification reaction (sequence capture-PCR). By using this approach to capture and amplify two different sequences specific for organisms of the Mycobacterium tuberculosis complex (IS6110 and the direct repeat region), it was possible to detect as little as one genome of mycobacterial DNA in samples containing up to 750 micrograms of total DNA, representing a 10- to 100-fold increase in sensitivity compared with that obtained by purifying total DNA prior to amplification. Detection of the IS6110 sequence in pleural fluid samples from patients with tuberculous pleurisy by sequence capture-PCR gave positive results in 13 of 17 cases, including 3 of 3 culture-positive samples and 10 of 14 culture-negative samples. In contrast, when total DNA was purified from these samples by adsorption to a silica matrix prior to amplification, only the three culture-positive samples were positive by PCR. The sensitivity of detection of the direct repeat sequence in these samples by sequence capture-PCR was similar to that of IS6110 and, in addition, permitted immediate typing of the strains from some patients. We conclude that sequence capture-PCR improves the sensitivity of detection of mycobacterial DNA in paucibacillary samples. This approach should be useful in detecting rare target sequences from organisms implicated in other pathologic processes.     

Cold forging and chemical heat treatment of the casing of the internal joint for VAZ cars

The technological process of cold forging applied for the first time in the production of the casing of the internal joint with races is described. The process operations of cold forging and the annealing and carburizing regimes for this part me described.     

Diffusion bonding of ferritic oxide dispersion strengthened alloys to austenitic superalloys

The superior high temperature mechanical strength and oxidation resistance of ferritic oxide dispersion strengthened (ODS) tubular alloys are compromised by the difficulties encountered in joining. Conventional fusion welding techniques generate a weld fusion zone which is devoid of the mechanical strength exhibited by the base material. Therefore, more sophisticated solid state joining techniques, such as diffusion bonding, must be employed when joining ODS materials. This paper describes a series of solid state diffusion bonding experiments carried out between two tubular ferritic ODS alloys and two high temperature austenitic alloys. Careful control of bonding conditions produced pressure retaining joints between one of the tubular ODS alloys and both austenitic alloys. The successful joint design was incorporated into the manufacture of a tubular creep component, which enabled a series of internally pressurized creep tests to be carried out. The microstructure developed at the bond interface of each of the four separate material couples is described and the high temperature performance of the pressure retaining joints is discussed.     

Magnetization and rotation of MTG HTSC ring in magnetic field

The magnetization of a melt-texture growth (MTG) HTSC ring has been studied. It is shown that the magnetic field inside the ring is larger than the external field under a certain range of external magnetic fields. We have also investigated the magnetic field dependence of the response of a detective coil near a rotating superconducting ring. The responses of the MTG sample are different for different cooling methods.     

New ceramer high optical abrasion resistant transparent coating materials based on functionalized melamine and a tris(m-aminophenyl)phosphine oxide compound

Summary The synthesis of new high optical abrasion resistance coating materials has been undertaken by functionalizing melamine and tris(m-aminophenyl)phosphine oxide with a triethoxysilane containing reagent. These highly functionalized compounds have been used for coating a bis-phenol-A polycarbonate substrate by the sol-gel method. Preliminary data shows the abrasion resistance of the polymer substrate is considerably improved when it is coated by these optically clear materials.     

On the time-domain scattering by a passive classical frequency dependent wedge-shaped region in a lossy dispersive medium

The time-scattering of an electromagnetic wave by a wedge-shaped region in a lossy medium, both with frequency dependent electric characteristics, is analyzed for plane wave and line source illuminations. New exact analytical expressions, satisfying explicitely the causality and allowing useful physical decompositions of the field, are obtained in these cases, using the particularities of the harmonic response in Sommerfeld-Maliuzhinets integral, especially original properties of the spectral function attached to it.     

Fractal error for detecting man-made features in aerial images

A technique is proposed for aiding photointerpreters in detecting man-made features in aerial reconnaissance images. The technique, which uses a metric called fractal error, is based on the observed propensity of natural image features to fit a fractional Brownian motion model. Man-made features usually do not fit this model well, and consequently the fractal error metric may be used as a discriminant function for detecting man-made scene features