3D printing hybrid organometallic polymer‐based biomaterials via laser two‐photon polymerization

Materials with microscale structures are gaining increasing interest due to their range of technical and medical applications. Additive manufacturing approaches to such objects via laser two‐photon polymerization, also known as multiphoton fabrication, enable the creation of new materials with diverse and tunable properties. Here, we investigate the properties of 3D structures composed of organometallic polymers incorporating aluminium, titanium, vanadium and zirconium. The organometallic polymer‐based materials were analysed using a variety of techniques including SEM, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy analysis and contact angle measurements and their biocompatibility was tested in vitro. Cell viability and mode of death were determined by 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide (MTT) assay and acridine orange/ethidium bromide staining. Polymers incorporating Al, Ti and Zr supported cell adhesion and proliferation, and showed low toxicity in vitro, whereas the organometallic polymer incorporating V was shown to be cytotoxic. Inductively coupled plasma optical emission spectrometry suggested that leaching of the V from the organometallic polymer is the likely cause of this. The preparation of the organometallic polymers is straightforward and both simple 2D and complex 3D structures can be fabricated with ease. Resolution tests of the newly developed organometallic polymer incorporating Al show that suspended lines with widths down to 200 nm can be fabricated. We believe that the materials described in this work show promising properties for the development of objects with sub‐micron features for biomedical applications (e.g. biosensors, drug delivery devices, tissue scaffolds etc.). © 2019 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Associations between Oil Yield and Profile of Fatty Acids,Sterols, Squalene,Carotenoids, and Tocopherols in Seed Oil of Selected Japanese Quince Genotypes during Fruit Development

Tocopherols, phytosterols, carotenoids, and squalene are present in mature seeds of Japanese quince. Yet, little is known about the relationship between these compounds and oil yield during fruit and seed development. The profile change of lipophilic compounds during fruit and seed development in Japanese quince cultivars “Darius,” “Rondo,” and “Rasa” is investigated. It is shown here that during fruit and seed development, there is a significant reduction, three‐ to over tenfold, in the concentration of minor bioactive compounds in seed oil. It is recorded that delay between synthesis of tocopherols and oil in Japanese quince seeds during the fruit development results in a logarithmic relationship between the oil content and tocopherols concentration in the seed oil (R² = 0.980). Similar trends are observed between oil yield and phytosterols, and carotenoids (R² = 0.927 and R² = 0.959, respectively). The profile of fatty acids during the development of the seeds significantly is changed. The reduction of linoleic, palmitic, and gondoic acids levels and increment of oleic acid is noted. The oil content, profile of fatty acids, and concentration of bioactive compounds in all three genotypes of Japanese quince do not change significantly statistically during the last month of fruit development. Practical Applications: Some fruits are harvested at different degrees of maturity mainly due to a logistic issue and uneven ripening of fruits, which affects the chemical composition of whole fruit including seeds. Therefore, it would be good to know how the chemical composition is changing in plant material during development especially in the last month before harvest. Production of Japanese quince continues to rise year to year and with it the volume of generated by‐products such as seeds. This study demonstrates how it changes the oil content, profile of fatty acid, and concentration of tocopherols, squalene, phytosterols, and carotenoids in the seeds and seed oil of three Japanese quince cultivars “Rondo,” “Darius,” and “Rasa” during plant development. The provided information can be very useful for the manufactories oriented on the processing of by‐products, mainly seeds, generated by other branches of industry, for instance, fruit‐processing.     

Effect of particle size on the shaping of ceramics by slip casting

The effect of the nanometric-ranged particle size of the starting powder through a simple and well-established shaping method, slip casting, has been studied. Several alumina suspensions with the same viscosity (but different solid content suspensions) and different particle size (11, 44, 190 and 600 nm) were prepared and shaped into a dense body. The green and sintered densities ranged between 30–67% and 63–99% of the theoretical value, respectively. These values, together with the microstructure observations reveal the effect of the solid content of the suspensions and the characteristics of the ceramic powder, leading to the determination of an optimal particle size. Based on both processability (rheological behaviour) and microstructure (density and grain size) it has been determined that particles with sizes ranging 100–300 nm are the best for preparing concentrated suspensions with low viscosity and bodies with density close to the theoretical value when using conventional pressureless sintering densification.     

The Impact of Zeta Potential and Physicochemical Properties of TiO2‐Based Nanocomposites on Their Biological Activity

The aim of this research was to observe the relationship between zeta potential, morphology, surface area, porosity, chemical composition, and ecotoxicity of nanocomposite powders such as Au/TiO₂, Ag₂O/TiO₂, PdO/TiO₂, Ag/TiO₂/SiO₂, Ag/N(C)TiO₂, and SiO₂/TiO₂ from which Ag₂O/TiO₂, Ag/N(C)/TiO_2, and Ag/TiO₂/SiO₂ were exhibiting good antimicrobial properties. It was observed, that nanomaterials characterized by similar morphology and zeta potential revealed the similar toxic behavior. The samples of higher agglomeration and higher zeta potential, especially Ag/TiO₂/SiO₂ xerogel and TiO₂/SiO₂ aerogel were generally less ecotoxic to water organisms and plants. They were also not genotoxic in concentrations up to 500 and 250 mg/L, respectively.     

Selective Behaviour of Honeybees in Acquiring European Propolis Plant Precursors

Honey bees harvest resins from various plant species and use them in the hive as propolis. While there have been a number of studies concerning the chemical composition of this antimicrobial product, little is known about selective behavior and bee preference when different potential plant sources of resin are available. The main objective of this paper was to investigate some aspects of behavioral patterns of honeybees in the context of resin acquisition. Samples of propolis originating from temperate zones of Europe and the supposed botanical precursors of the product were analyzed. Taxonomical markers of bud resins of two white birch species, aspen, black poplar, horse-chestnut, black alder, and Scots pine were determined through GC-MS analysis. All these trees have been reported as sources of propolis, but comparisons of the chemical composition of their bud resins with the compositions of propolis samples from seven European countries have demonstrated the presence of taxonomical markers only from black poplar, aspen, and one species of birch. This suggests selective behavior during the collection of bud resins by honeybees. To examine the causes of such selectivity, the antimicrobial properties of bud resins were determined. Horse-chestnut resins had lower antimicrobial activity than the other resins which did not differ significantly.     

Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind

Nowadays different kinds of double-skin facades are developed and used in new architectural projects. The aim of these facades is, on the one hand, to increase internal comfort and, on the other hand, to decrease energy consumption. In order to optimise the overall performance of the double-skin façades, their detailed behaviour needs to be better understood. The prediction of the airflow within the channel (between the two glazings) is very important for understanding of the double-skin facades behaviour, especially in summer conditions. A comprehensive modelling of a compact double-skin facade equipped with a venetian blind and forced ventilation is proposed here. The modelling is done using the CFD (computational fluid dynamics) approach to assess the air movement within the ventilated facade channel. Three-dimensional airflow is modelled using a homogeneous porous media representation, in order to reduce the size of the mathematical model. A parametric study is proposed here, analysing the impact of three parameters on the airflow development: slat tilt angle, blind position and air outlet position. The distance between the blind and the external glazing was found to have a major impact on the velocity profiles inside the double-skin facade channel.     

Hydrogen Bonding Drives Helical Chirality via 10-Membered Rings in Dipeptide Conjugates of Ferrocene-1,1′-Diamine

Considering the enormous importance of protein turns as participants in various biological events, such as protein–protein interactions, great efforts have been made to develop their conformationally and proteolytically stable mimetics. Ferrocene-1,1′-diamine was previously shown to nucleate the stable turn structures in peptides prepared by conjugation with Ala (III) and Ala–Pro (VI). Here, we prepared the homochiral conjugates of ferrocene-1,1′-diamine with l-/d-Phe (32/35), l-/d-Val (33/36), and l-/d-Leu (34/37) to investigate (1) whether the organometallic template induces the turn structure upon conjugation with amino acids, and (2) whether the bulky or branched side chains of Phe, Val, and Leu affect hydrogen bonding. Detailed spectroscopic (IR, NMR, CD), X-ray, and DFT studies revealed the presence of two simultaneous 10-membered interstrand hydrogen bonds, i.e., two simultaneous β-turns in goal compounds. A preliminary biological evaluation of d-Leu conjugate 37 showed its modest potential to induce cell cycle arrest in the G0/G1 phase in the HeLa cell line but these results need further investigation.