Multiplexed biochemical assays with biological chips

High density peptide and oligonucleotide chips are fabricated using semiconductor-based technologies. These chips have a variety of biological applications.     

A new tool to measure pressure under burn garments

This article introduces a new tool to measure the pressure that is under pressure garments. The Iscan (Tekscan, Inc.) system uses a patented ultra-thin (0.007 inch) sensor with multiple sensing locations that sample continuously at 100 times per second. It is noninvasive, convenient, and quick. The study had two parts. First, we established the validity and reliability of the device. Next, garment/scar interface pressures were measured on new garments with use of the Iscan system. Four garment types were studied, with 10 measurements made in each group: Isotoner gloves (Smith & Nephew Roylan, Inc.); custom-fit pressure gloves; Tubigrip forearm sleeves (Seton Health Care Group); and custom-fit pressure forearm sleeves. Mean garment/scar interface pressures were 18 +/- 2 mm Hg for the Isotoner glove, 34 +/- 5 mm Hg for the custom-fit pressure glove, 20 +/- 7 mm Hg for the Tubigrip sleeve, and 35 +/- 6 mm Hg for the custom-fit sleeve. We concluded that the Iscan system can be used to measure pressure under pressure garments accurately and reliably, and that custom-fit hand and forearm garments provide more pressure than Isotoner gloves or Tubigrip sleeves.     

Economics of liquid hydrogen from water electrolysis

Using the data from vendors and open literature, we have constructed a preliminary cost model to predict the cost of liquid hydrogen (LH₂) from water electrolysis. The model has been applied to two LH₂ plants. Both have a production rate of 10 886 kg day⁻¹. The first plant (Plant 1) consists of a tank-type electrolyzer and a liquefier and runs all day at the base-load (or equivalent base-load) power rate. The second (Plant 2) consists of a tank-type electrolyzer, a liquefier, a compressor, and storage vessels. The electrolyzer and the compressor shall run only during the off-peak hours at the off-peak power rate. However, the liquefier shall run all day at the base-load (or equivalent base-load) power rate. The costs of LH₂ from both plants are presented. Unless the base-load power rate is high and the off-peak power rate is substantially low, Plant 1 appears to be economically more feasible than Plant 2.     

Mechanical properties of poly(ether-ether-ketone) for engineering applications

An outline of the characteristics of PEEK and the versatility of its compositional forms (micro and macro composites) are given to illustrate its wide potential for success in engineering applications. Although it is necessary to have particular tabulations of mechanical properties for engineering design, these are seldom available and consequently it is argued that an understanding of stiffness, toughness and strength properties are required to fully exploit available manufacturer's data and thus develop the full potential of PEEK and its composites. Stiffness characteristics are considered in terms of a modulus function which is dependent on time under load and temperature. In its composite forms, whether reinforced with short or continuous fibres, stiffness anistropy can be both considerable and complex, but some empirical ground-rules are apparent. For continuous fibre composites even in the form of complex lay-ups, it is also possible to attempt some stiffness prediction from certain pseudo-elastic constants. Toughness of PEEK and its composites is described in terms of both comparative and intrinsic properties. Instrumented falling weight impact data, particularly as a function of temperature enable some insight into ductile-brittle transitions for the unreinforced material, but crack initiation and crack propagation processes for the various fibre reinforced forms. Intrinsic toughness is described in terms of linear elastic fracture mechanics theory. Strength properties are described for static and dynamic loading configurations. In particular, PEEK and its composites are evaluated for increasing test severities for strength characteristics; stress concentration, loading form and test temperature are considered.     

Inhibition of sickle beta-chain (betaS)-dependent polymerization by nonhuman alpha-chains. A superinhibitory mouse-horse chimeric alpha-chain

Horse alpha-chain inhibits sickle beta-chain-dependent polymerization; however, its inhibitory potential is not as high as that of mouse alpha-chain. Horse alpha-(1-30) and alpha-(31-141) segments make, respectively, minor and major contributions to the inhibitory potential of horse alpha-chain. The sum of the inhibitory potential of the two segments does not account for the inhibitory potential of the full-length horse alpha-chain. Although the polymerization inhibitory potential of horse alpha-chain is lower than mouse alpha-chain, the inhibitory potential of horse alpha-(31-141) is comparable to that of mouse alpha-(31-141). When mouse alpha-(1-30) is stitched to horse alpha-(31-141), the product is a chimeric alpha-chain with an inhibitory potential greater than mouse alpha-chain. In contrast, the stitching of horse alpha-(1-30) with mouse alpha-(31-141) had no additional inhibitory potential. Molecular modeling studies of HbS containing the mouse-horse chimeric alpha-chain indicate altered side-chain interactions at the alpha1beta1 interface when compared with HbS. In addition, the AB/GH corner perturbations facilitate a different stereochemistry for the interaction of the epsilon-amino group of Lys-16(alpha) with the beta-carboxyl group of Asp-116(alpha), resulting in a decrease in the accessibility of the side chain of Lys-16(alpha) to the solvent. Based on molecular modeling, we speculate that these perturbations by themselves, or in synergy with the altered conformational aspects of the alpha1beta1 interactions, represent the molecular basis of the superinhibitory potential of the mouse-horse chimeric alpha-chains.     

Use of pooled time series in the study of naturally occurring clinical events and problem behavior in a foster care setting.

Pooled time series is an underused analytic technique with the potential to increase researchers' ability to exploit clinical data. This article demonstrates the value of pooled time series by analyzing the behavior of youths in a specialized foster care treatment setting in response to a naturally occurring clinical event: changes in the number of youths living together in a treatment foster care setting. Pooled time series moves beyond typical clinical analyses with an increased capability of controlling statistically for complex within-S effects and with a clinically useful measure of effect size. The complexity of the intra-S data made it virtually impossible to determine the relevant significance (i.e., clinical meaning) of the clinical event by the use of standard n?=?1 visual analysis procedures or standard statistical methods (e.g., chi square). After things such as autocorrelation and individual time trends were statistically controlled, each additional youth increased the number of problematic behaviors by one behavior per youth per day on the Parent Daily Report. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Prevalence of artificial hip implants and use of health services by recipients

Intraneural injection of 10-20 x 10(6) viable Mycobacterium leprae into the sciatic nerve of normal, unsensitized, Swiss white mice gives rise to a tuberculoid type of granulomatous response in 2 weeks. The same dose of viable M. leprae when injected into the sciatic nerves of unsensitized immunosuppressed mice (T200 x 5R) elicited a macrophage response. When macrophages were systemically immobilized using an intraperitoneal injection of silica quartz dust in normal mice, the lesion produced was of the lepromatous type, suggesting a role for the macrophage in the induction of the tuberculoid type of granulomatous response. In all of these in situ experiments, M. leprae failed to enter the Schwann cells.