The viscoplastic properties of crude oil-water interfaces

The breaking of water-in-crude oil emulsions is a major challenge in the conventional petroleum industry, while oil-in-water emulsions present similar issues in commercial oilsands extraction processes. The stability of these emulsions can be attributed to complex rheological properties of the crude oil-water interface. Novel micromechanical techniques are developed that allow direct measurements of interfacial behaviour of emulsion drops. In these techniques, individual emulsion drops are elongated using micropipettes, where one micropipette is shaped into a cantilever for force measurements. As such, the surface behaviour of a drop is recorded in stress-strain experiments. In an alternative technique, the extended drop is released from a micropipette, and its natural, tension-driven relaxation is observed.The surface behaviour of bitumen (a heavy crude oil) emulsion drops in aqueous environments, that include dissolved calcium ions and suspended montmorillonite clays, is studied. The plasticity and other surface properties of these bitumen drops are discussed. A simple, lumped-parameter model is developed to describe the recovery of a bitumen drops to their final non-spherical shapes.     

Recording auditory brainstem responses from infants

Auditory brainstem responses (ABRs) can be reliably recorded from infants in the first few months of life. Since they are normally recognizable down to intensities that are 30 dB above normal hearing thresholds, ABRs elicited by clicks are useful in screening for hearing-impairment in infancy. The ABRs can also provide further diagnostic information about the hearing losses that are detected by screening: the threshold for the response represents a reasonable estimate of the severity of the hearing loss; bone-conduction studies can assess the extent of a conductive loss; and frequency-specific techniques can evaluate hearing thresholds at different frequencies. At present, ABRs are mainly used for screening infants who have been treated in neonatal intensive care units. Because the majority of infants with hearing impairment are not seen in these units, it might be worthwhile to use ABRs in a more widespread screening program.     

Cloning, expression and sequence analysis of the SphI restriction-modification system

SphI, a type II restriction-modification (R-M) system from the bacterium Streptomyces phaeochromogenes, recognizes the sequence 5'-GCATGC. The SphI methyltransferase (MTase)-encoding gene, sphIM, was cloned into Escherichia coli using MTase selection to isolate the clone. However, none of these clones contained the restriction endonuclease (ENase) gene. Repeated attempts to clone the complete ENase gene along with sphIM in one step failed, presumably due to expression of SphI ENase gene, sphIR, in the presence of inadequate expression of sphIM. The complete sphIR was finally cloned using a two-step process. PCR was used to isolate the 3' end of sphIR from a library. The intact sphIR, reconstructed under control of an inducible promoter, was introduced into an E. coli strain containing a plasmid with the NlaIII MTase-encoding gene (nlaIIIM). The nucleotide sequence of the SphI system was determined, analyzed and compared to previously sequenced R-M systems. The sequence was also examined for features which would help explain why sphIR unlike other actinomycete ENase genes seemed to be expressed in E. coli.     

Survivorship analysis of the Kinematic Stabilizer total knee replacement: a 10- to 14-year follow-up

The Kinematic Stabilizer is a posterior-cruciate-substituting design of total knee replacement. We have reviewed 109 primary total knee replacements in 95 patients at a mean follow-up time of 12.7 years (10 to 14). We used survival analysis with failure defined as revision of the implant. This gave a cumulative survival rate of 95% (95% CI +/- 5%) at ten years and (87% +/- 10%) at 13 years. These results from an independent centre confirm the value of an established design of cemented total knee replacement and question the wisdom of the introduction of modifications and new designs without properly controlled trials.     

Quantitative measurement of urinary excretion of 3-hydroxyisovaleryl carnitine by LC-MS/MS as an indicator of biotin status in humans

Abnormally increased urinary excretion of 3-hydroxyisovaleryl carnitine (3HIA-carnitine) results from impairment in leucine catabolism caused by reduced activity of the biotin-dependent enzyme 3-methylcrotonyl-CoA carboxylase. Accordingly, urinary 3HIA-carnitine might reflect biotin status. Here, we describe an LC-MS/MS method for accurately quantitating the urinary concentration of 3HIA-carnitine at concentrations that are typical for excretion rates that are normal or only modestly increased. This method allows for high sample throughput and does not require solid-phase extraction. We used this method to provide evidence validating urinary 3HIA-carnitine as a biomarker of biotin deficiency in humans. Four healthy adult subjects were successfully made marginally biotin deficient by feeding a 30% egg white diet for 28 days. From study day 0 to 28, the mean urinary excretion of 3HIA-carnitine increased 3.5-fold (p = 0.026). These preliminary results indicate that urinary excretion of 3HIA-carnitine increases with marginal biotin deficiency. If these results are confirmed in studies involving larger numbers of subjects, urinary excretion of 3HIA-carnitine may potentially be a clinically useful indicator of biotin status.     

分组密码DPA汉明重量区分函数选择方法

为了解决分组密码差分能量分析攻击(DPA)汉明重量区分函数选择问题,提出了一种基于相对非线性度的选择方法.该方法利用分组密码算法S盒输出相对非线性度与DPA之间的关系,通过比较相对非线性度的大小来选择汉明重量区分函数.通过仿真验证和实测验证,证明采用该方法能够正确地选择攻击效果较好的汉明重量区分函数.     

A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena

High-integrity castings require sophisticated design and manufacturing procedures to ensure they are essentially macrodefect free. Unfortunately, an important class of such defects—macroporosity, misruns, and pipe shrinkage—are all functions of the interactions of free surface flow, heat transfer, and solidication in complex geometries. Because these defects arise as an interaction of the preceding continuum phenomena, genuinely predictive models of these defects must represent these interactions explicitly. This work describes an attempt to model the formation of macrodefects explicitly as a function of the interacting continuum phenomena in arbitrarily complex three-dimensional geometries. The computational approach exploits a compatible set of finite volume procedures extended to unstructured meshes. The implementation of the model is described together with its testing and a measure of validation. The model demonstrates the potential to predict reliably shrinkage macroporosity, misruns, and pipe shrinkage directly as a result of interactions among free-surface fluid flow, heat transfer, and solidification.