Surface plasmon based thermo-optic and temperature sensor for microfluidic thermometry

We report on a noninteracting technique for the thermal characterization of fluids based on surface plasmon resonance interrogation. Using liquid volumes less than 20 μl, we have determined the materials' thermo-optic coefficients with an accuracy of better than 1×10(-5) °C(-1) and demonstrated temperature sensing with an accuracy of 0.03 °C. The apparatus employs a low-power probe laser, requiring only a single wavelength, polarization, and interrogation angle for accurate characterization. The device is particularly suited for precise diagnostics of liquids and gases within microfluidic systems and may also be readily integrated into a variety of lab-on-chip platforms, providing rapid and accurate temperature diagnostics.     

Residual waste from Hanford tanks 241-C-203 and 241-C-204. 1. Solids characterization

Bulk X-ray diffraction (XRD), synchrotron X-ray microdiffraction (microXRD), and scanning electron microscopy/ energy-dispersive X-ray spectroscopy (SEM/EDS) were used to characterize solids in residual sludge from single-shell underground waste tanks C-203 and C-204 at the U.S. Department of Energy's Hanford Site in southeastern Washington state. Cejkaite [Na4(UO2)(CO3)3] was the dominant crystalline phase in the C-203 and C-204 sludges. This is one of the few occurrences of cejkaite reported in the literature and may be the first documented occurrence of this phase in radioactive wastes from DOE sites. Characterization of residual solids from water leach and selective extraction tests indicates that cejkaite has a high solubility and a rapid rate of dissolution in water at ambient temperature and that these sludges may also contain poorly crystalline Na2U207 [or clarkeite Na[(UO2)O(OH)](H2O)0-1] as well as nitratine (soda niter, NaNO3), goethite [alpha-FeO(OH)], and maghemite (gamma-Fe2O3). Results of the SEM/EDS analyses indicate that the C-204 sludge also contains a solid that lacks crystalline form and is composed of Na, Al, P, O, and possibly C. Other identified solids include Fe oxides that often also contain Cr and Ni and occur as individual particles, coatings on particles, and botryoidal aggregates; a porous-looking material (or an aggregate of submicrometer particles) that typically contain Al, Cr, Fe, Na, Ni, Si, U, P, O, and C; Si oxide (probably quartz); and Na-Al silicate(s). The latter two solids probably represent minerals from the Hanford sediment, which were introduced into the tank during prior sampling campaigns or other tank operation activities. The surfaces of some Fe-oxide particles in residual solids from the water leach and selective extraction tests appear to have preferential dissolution cavities. If these Fe oxides contain contaminants of concern, then the release of these contaminants into infiltrating water would be limited by the dissolution rates of these Fe oxides, which in general have lowto very low solubilities and slow dissolution rates at near neutral to basic pH values under oxic conditions.     

DNA-repair protein distribution along the tracks of energetic ions

A simple model of homogenous chromatin distribution in HeLa-cell nuclei suggests that the track of an energetic ion hits 30 nm chromatin fibers with a mean distance of 0.55 mum. To test this assumption, living HeLa-cells were irradiated at the irradiation setup of the ion microprobe SNAKE using the ion beams provided by the Munich 14 MV tandem accelerator. After irradiation, the distribution of 53BP1 protein foci was studied by immunofluorescence. The observed 53BP1 distribution along the tracks of 29 MeV (7)Li ions and 24 MeV (12)C ions differed significantly from the expectations resulting from the simple chromatin model, suggesting that the biological track structure is determined by cell nuclear architecture with higher order organisation of chromatin.     

Synthesis of 2-Substituted 2-Arylmalonates via Tricarbonylchromium Complexes

Tricarbonylchromium complexes 1 react with monosubstituted malonic acid esters 2 in DMSO at room temperature in the presence of KOtBu to give the complexes 3 . After oxidative demetalation, the appropriate aryl derivatives 4 are obtained in moderate to good overall yields. Diastereoselective arylations of chirally modified malonates such as 5a–c were studied. The stereoselectivity was highest for the products 6c/6c ′ (80:20) with (−)-8-phenylmenthol as alcohol component in the malonate 5 .     

Influence of fluorescence anisotropy on fluorescence intensity and lifetime measurement: theory, simulations and experiments

The significance of fluorescence anisotropy in fluorescence intensity and lifetime measurements, and erroneous measurements and interpretations resulting from its disregard, are thoroughly discussed, formulated and quantified. In all fluorescence-related measurements--including excitation and emission spectra, relative fluorescence intensity (FI), fluorescenc life time (FLT), fluorescence resonance energy transfer (FRET), etc., with the exception of fluorescence polarization and anisotropy--it is generally true that the higher the fluorescence anisotropy, the greater the distortion of fluorescence measurements. Quantifiable distortions occur when fluorescence measurements are conducted without considering the influence of fluorescence anisotropy. Here, this influence is described by numerous newly developed mathematical expressions which are simulated and experimentally confirmed utilizing single and binary fluorescent solutions of fluorophores with different spectroscopic characteristics. A marked agreement is shown between the theory and experimental data, clearly indicating the legitimacy of the physical suppositions and the mathematical expressions presented in this paper. Practical and instructive implications are discussed. The following findings are of special applicative importance: 1) the existence of an infinite number of couples of Magic Angles; 2) the deviation between two equally fluorescing particles having different fluorescence anisotropies; 3) the relation between the detected fluorescence intensity and anisotropy when measured under various setups of emission and excitation polarizers; 4) the dependence of the artificial normalized steady-state weight of a single-exponentially decaying fluorophore on its fluorescence anisotropy.     

The first dairy product exclusively fermented by Propionibacterium freudenreichii: A new vector to study probiotic potentialities in vivo

Dairy propionibacteria display probiotic properties which require high populations of live and metabolically active propionibacteria in the colon. In this context, the probiotic vector determines probiotic efficiency. Fermented dairy products protect propionibacteria against digestive stresses and generally contain a complex mixture of lactic and propionic acid bacteria. This does not allow the identification of dairy propionibacteria specific beneficial effects. The aim of this study was to develop a dairy product exclusively fermented by dairy propionibacteria. As they grow poorly in milk, we determined their nutritional requirements concerning carbon and nitrogen by supplementing milk ultrafiltrate (UF) with different concentrations of lactate and casein hydrolysate. Milk or UF supplemented with 50 mM lactate and 5 g L⁻¹ casein hydrolysate allowed growth of all dairy propionibacteria studied. In these new fermented dairy products, dairy propionibacteria remained viable and stress-tolerant in vitro during minimum 15 days at 4 °C. The efficiency of milk fermented by the most tolerant Propionibacterium freudenreichii strain was evaluated in piglets. Viability and SCFA content in the colon evidenced survival and metabolic activity of P. freudenreichii. This work results in the design of a new food grade vector, which will allow preclinical and clinical trials.     

Active species of copper chromite catalyst in C–O hydrogenolysis of 5-methylfurfuryl alcohol

The active sites of copper chromite catalyst, CuCr₂O₄·CuO, were investigated for the condensed-phase hydrogenolysis of 5-methylfurfuryl alcohol to 2,5-dimethylfuran at 220 °C. The bulk and surface features of the catalyst were characterized by XRD, H₂-TPR, N₂ adsorption, CO chemisorption, N₂O titration, NH₃-TPD, XPS, and AES. Maxima of both of the potential active species, Cu⁰ and Cu⁺, occurred after reduction in H₂ at 300 °C compared to 240 and 360 °C. These Cu⁰ and Cu⁺ maxima also coincided with the highest specific rate of reaction based on the surface area of the reduced catalyst. The trends of Cu⁰ and Cu⁺ observed by N₂O titration and CO chemisorption were also observed qualitatively by AES. Correlations between activity and the possible active species suggested that Cu⁰ was primarily responsible for the activity of the catalysts.     

Surface Modification in Polycrystalline Y2O3 Under High‐Pressure/High‐Temperature Processing Conditions

A pressure‐induced phase transformation is used to refine the grain size of polycrystalline Y₂O₃, by a factor of 3000. A surface modification effect accompanies the observed grain refinement, which becomes more apparent with increasing holding time under high pressure. The surface‐modified layer exhibits lower hardness and lower oxygen content relative to the underlying material. Moreover, it possesses columnar‐grained structure with cubic symmetry, whereas the interior has a monoclinic structure.