Densification and Thermal Conductivity of AIN Doped with Y2O3, CaO, and Li2O

Small amounts of Li₂O result in sintering in the AIN-Y₂O₃-CaO and AIN-CaO systems at firing temperatures <1600°C. The effect is ascribed to reduction of the liquidus temperature. Furthermore, Li₂O is removed by volatization at temperatures from 1300° to 1600°C, and its content decreases several ppm from the initial 0.3 wt%. Li₂O-doped AIN specimens containing Y₂O₃ and CaO additives are well densified by firing at 1600°C for 6 h, and their thermal conductivity is 135 W^.m^−1.K⁻¹.The effect of Li₂O addition on sintering and thermal conductivity also is discussed through thermo-dynamic considerations.     

High Thermal Conductivity in Silicon Nitride with Anisotropie Microstructure

Silicon nitride was fabricated by tape casting of α-Si₃N₄ powder with 5 wt% Y₂O₃ and 5 vol% rodlike β-Si₃N₄ seed particles, followed by tape stacking, hot pressing under 40 MPa, and annealing at 1850°C for 2-66 h under a nitrogen pressure of 0.9 MPa. Silicon nitrides fabricated by this procedure exhibited a highly anisotropic microstructure with large elongated grains (developed from seed particles) uniaxially oriented parallel to the casting direction. Thermal conductivities parallel to the grain alignment were much higher than those measured in other directions and exhibited high values of up to 120 W/(m.K). The anisotropic thermal conductivity of the specimen could be explained by the rule of mixture, considering that large elongated grains developed from seeds have higher thermal conductivity than a small-grained matrix.     

A Study on the Effect of Air on the Dynamic Motion of a MEMS Device and Its Shape Optimization

The authors propose a new design concept for controlling the deflection of a micro-membrane with the aid of its thickness distribution for realizing a prescribed design in the MEMS. As an example, the authors treat a micro air pump that comprises a micro-membrane. The membrane is actuated by an electrostatic force. The membrane deflects and thus the deflection is influenced by the air pressure and the electrostatic field. This is a highly complicated system. To find out a proper thickness distribution, the authors use the genetic algorithm that is appropriate to reduce the searching space of solution.     

Investigation on the effects of microwave and conventional heating methods on the phytochemicals of pomegranate (Punica granatum L.) and black mulberry juices

Black mulberry and pomegranate juices were concentrated by conventional and microwave heating at different operational pressures (7.3, 12, 38.5, and 100 kPa). The effects of each heating method on the phytochemical changes (total anthocyanin content and antioxidant activity) of juices were investigated. The effect of various heating methods on the profile of the pomegranate anthocyanins were conducted using high-performance liquid chromatography–mass spectrometry (HPLC–MS). The main anthocyanins of pomegranate quantified by HPLC–MS were cyanidin, delphidin, pelargonidin, 3-glucoside, and 3, 5-diglucoside. In black mulberry juice, the final juice concentration of 42° Brix was achieved in 140, 120, and 95 min at 100, 38.5, and 7.3 kPa respectively and the final pomegranate juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa respectively by using a rotary evaporator. Applying microwave energy decreased the required times to 115, 95, and 60 min for black mulberry juice and to 118, 95, and 75 min for pomegranate juice. Results showed that anthocyanin degradation and consequently decrease in antioxidant activity were more pronounced in rotary evaporation compared to microwave heating method.     

Suppression of skin reactivity to purified protein derivative by hepatitis C virus among HTLV-I carriers in Japan

Gamma-aminobutyric acid (GABA)A receptors are the sites of action for many antiepileptic drugs such as benzodiazepines and barbiturates. We report the results of molecular cloning of the gamma1-subunit from seizure prone DBA/2J and resistant C57BL/6J inbred mice, and analyses of nucleotide sequences and expression of the gamma1-subunit messenger RNA (mRNA) in DBA/2 and C57BL/6 inbred mice. The mouse gamma1-subunit complementary DNA (cDNA) shares 98% similarity with that of the rat at the level of amino acid sequence. Northern blot hybridization indicates that the gamma1-subunit mRNA is expressed predominantly in areas other than the cerebral cortex and cerebellum and shows little change with postnatal development. No differences have been found for the subunit between DBA/2 and C57BL/6 mice either for nucleotide sequence or for level of expression of the subunit's mRNA in whole brain by Northern blots at 3 weeks of age.     

Fabrication of low-loss and wide-bandwidth v.a.d. optical fibres at 1.3 ?m wavelength

A low-loss and wide-bandwidth optical fibre in the long-wavelength region has been fabricated by the v.a.d. method. Loss at 1.3 ?m is 0.98 dB/km and 6 dB down bandwidth is 1600 MHz km at 1.26 ?m.     

Proportion of aflatoxin B1 contaminated kernels and its concentration in imported peanut samples

Moldy and split peanut kernels were separated from peanuts exported from Brazil, Sudan, India and Taiwan by visual inspection. The remaining peanuts from Brazil, Sudan and India were roasted lightly and the skins were removed. Stained peanuts were separated from the others. Aflatoxin was detected in moldy and stained peanuts. There was a positive correlation between % of aflatoxin-contaminated peanut kernels and aflatoxin B1 concentration in whole samples. Aflatoxin concentration of moldy peanuts was higher than that of stained peanut kernels.     

Electromyographic prosthetic hand using grasping-force-magnification mechanism with five independently driven fingers

This paper proposes an electromyographic (EMG) prosthetic hand that has five independently driven fingers, a flexion drive, and a force-magnification drive. The flexion drive allows for rapid finger motion, and the force-magnification drive allows for a firm grasp. To realize the natural feeling of control similar to that of movements with nonamputated parts, the control system includes the impedance model of human forearms and utilizes the muscle contraction level extracted from a user’s EMG signals. We experimentally verified that the maximum fingertip force of the hand exceeds 20 N, and the time required to fully close the hand by the flexion drive is 0.53 s. We also experimentally verified that in response to EMG signals, the fingers can flex smoothly and the grasping force can be modulated. Furthermore, we show that taking EMG signals as inputs makes it possible to control six operations, including ones that use the five fingers in distinctive ways.