Rapid isothermal processing for fabrication of GaAs-basedelectronic devices [HBTs]

The use of rapid isothermal processing (RIP) is detailed for each of the three annealing steps in the fabrication of heterostructure-based devices such as heterojunction bipolar transistors (HBTs). RIP can be used for the alloying of ohmic metal contacts, annealing of ion-bombarded regions for device isolation or parasitic capacitance reduction, and for conventional implant activation annealing. High-speed (f_T=65 GHz) HBTs were achieved using RIP for all of the required heating steps. The authors compare the use of several types of silicon carbide-coated graphite susceptors for eliminating slip formation on 2- and 3-in-diameter GaAs wafers during high-temperature implant activation annealing     

Ordered dynamic channel assignment scheme with reassignment inhighway microcells

An ordered dynamic channel assignment with reassignment (ODCAR) scheme is proposed, and its performance is studied in a highway microcellular radio environment. Channels are assigned in an ordered basis in conjunction with a minimax algorithm under cochannel interference constraints, to provide high capacity and to alleviate worst case channel congestion in each microcell. Simulation results show significant performance improvements in terms of channel utilization and probability of call failure, at the expense of an increase in complexity and call switching requirements     

Recovery of monomers and fillers from high-temperature-vulcanized silicone rubbers—combined effects of solvent, base and fillers

The depolymerization of high-temperature-vulcanized (HTV) silicone rubbers containing filler silica and alumina into cyclosiloxane monomers and spontaneous recovery of fillers were studied. First, HTV silicone rubber was treated with different types of solvents in the presence of KOH to find that a triad mixture of diethylamine, methanol and hexane was appropriate not only to dissolve the silicone rubber to a suspension but also to separate fillers completely by filtration. The filtrate was distilled to remove solvent first and then give pure cyclosiloxane monomers in 76–84% yields. Second, the rubbers were treated with other types of triad mixture of solvents and bases, e.g. tetramethylammonium hydroxide, hexane and diethylamine. After filtration, residue was again treated with the amine and hexane to recover clean fillers in 83–93% yields. Cyclosiloxane monomers were also obtained from the combined filtrates in 67–78% yields.     

A light intensity function suitable for multimode fiber-opticsensors

Intensity distribution functions on the image plane are derived under the assumption that a multimode optic fiber is illuminated by a light source which can be approximated by infinite uniangular beams carrying equal power. The application of the theory to a Lambertian source is discussed. Experimental results, based on the observation of the light intensity distribution imaged on an opaque screen and collected by a digital camera, are presented. The theoretical and experimental data are compared to verify that the intensity function is an accurate model for describing the realistic approach to sensor design. The limitations of the uniangular and uniform intensity distribution models are discussed on the basis of theoretical and experimental results     

Formation of GaAsP interface layers monitored by reflectance anisotropy spectroscopy

Reflectance anisotropy spectroscopy (RAS) has been used to study As-by-P exchange during metalorganic vapor phase epitaxy. The study focuses on the processes occurring during switching from GaAs to GaInP, especially the effect of purging PH₃ over a GaAs surface. GaAsP/GaAs superlattices of different periodicity were grown and the P-content was determined by high-resolution x-ray diffraction and correlated to the RAS spectra. From the temperature dependence of the P-content, an activation energy of 0.56 eV was estimated for the incorporation mechanism. In addition to the insights into the processes at mixed group-V heterointerfaces, our study demonstrates the reproducibility of RAS transients that thus can be used for process monitoring.     

Understanding creep—a review

A simple model based on the Orowan equation and the dynamic evolution of the dislocation structure by generation and merging of slipped areas is used to see which experimental results on creep of pure and solute-hardened crystalline materials can or cannot be explained with regard to creep with refinement or coarsening of the dislocation structure and steady-state creep. Quantitative deficiencies of the model for pure materials are discussed; most of them are related to neglection of subgrain formation. This article is based on a presentation made in the workshop entitled “Mechanisms of Elevated Temperature Plasticity and Fracture,” which was held June 27–29, 2001, in San Diego, CA, concurrent with the 2001 Joint Applied Mechanics and Materials Summer Conference. The workshop was sponsored by Basic Energy Sciences of the United States Department of Energy.     

Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

Modeling and simulation for hybrid electric vehicles. II. Simulation

For pt.I see ibid., vol.3, no.4, p.235-43 (2002). Hybrid electric vehicle (HEV) simulation is conducted based on the model developed for a parallel HEV built in the University of Tennessee, Knoxville (UT-HEV). The HEV simulation is a parametric analysis of the power control schemes and vehicle performance. Major parameters are evaluated for the vehicle driven under the standard urban and highway driving schedules. The results indicate that current configuration of the UT-HEV NEON has superb capability for battery state of charge (SOC) recovery while meeting the velocity request of the given driving schedules. Recommendations are given from the simulation for optimal performance in light of the HEV power control, capability for SOC recovery through regeneration and regenerative braking, as well as velocity, acceleration and range performance.