Central Aggregator Intrusion Detection System for Denial of Service Attacks

Vehicle-to-grid technology is an emerging field that allows unused power from Electric Vehicles (EVs) to be used by the smart grid through the central aggregator. Since the central aggregator is connected to the smart grid through a wireless network, it is prone to cyber-attacks that can be detected and mitigated using an intrusion detection system. However, existing intrusion detection systems cannot be used in the vehicle-to-grid network because of the special requirements and characteristics of the vehicle-to-grid network. In this paper, the effect of denial-of-service attacks of malicious electric vehicles on the central aggregator of the vehicle-to-grid network is investigated and an intrusion detection system for the vehicle-to-grid network is proposed. The proposed system, central aggregator–intrusion detection system (CA-IDS), works as a security gateway for EVs to analyze and monitor incoming traffic for possible DoS attacks. EVs are registered with a Central Aggregator (CAG) to exchange authenticated messages, and malicious EVs are added to a blacklist for violating a set of predefined policies to limit their interaction with the CAG. A denial of service (DoS) attack is simulated at CAG in a vehicle-to-grid (V2G) network manipulating various network parameters such as transmission overhead, receiving capacity of destination, average packet size, and channel availability. The proposed system is compared with existing intrusion detection systems using different parameters such as throughput, jitter, and accuracy. The analysis shows that the proposed system has a higher throughput, lower jitter, and higher accuracy as compared to the existing schemes.     

An Optimal Algorithm for Resource Allocation in D2D Communication

The number of mobile devices accessing wireless networks is skyrocketing due to the rapid advancement of sensors and wireless communication technology. In the upcoming years, it is anticipated that mobile data traffic would rise even more. The development of a new cellular network paradigm is being driven by the Internet of Things, smart homes, and more sophisticated applications with greater data rates and latency requirements. Resources are being used up quickly due to the steady growth of smartphone devices and multimedia apps. Computation offloading to either several distant clouds or close mobile devices has consistently improved the performance of mobile devices. The computation latency can also be decreased by offloading computing duties to edge servers with a specific level of computing power. Device-to-device (D2D) collaboration can assist in processing small-scale activities that are time-sensitive in order to further reduce task delays. The task offloading performance is drastically reduced due to the variation of different performance capabilities of edge nodes. Therefore, this paper addressed this problem and proposed a new method for D2D communication. In this method, the time delay is reduced by enabling the edge nodes to exchange data samples. Simulation results show that the proposed algorithm has better performance than traditional algorithm.     

Infrared Spectroscopy-Based Chemometric Analysis for Lard Differentiation in Meat Samples

One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and beef with different concentrations (10%–50% v/v). Principal component analysis (PCA) and partial least square (PLS) were used to develop a calibration model at 800–3500 cm⁻¹. Three-dimension PCA was successfully used by dividing the spectrum in three regions to classify lard meat adulteration in chicken, lamb, and beef samples. The corresponding FTIR peaks for the lard have been observed at 1159.6, 1743.4, 2853.1, and 2922.5 cm⁻¹, which differentiate chicken, lamb, and beef samples. The wavenumbers offer the highest determination coefficient R² value of 0.846 and lowest root mean square error of calibration (RMSEC) and root mean square error prediction (RMSEP) with an accuracy of 84.6%. Even the tiniest fat adulteration up to 10% can be reliably discovered using this methodology.     

A new method of reinforcing graphene nanoplatelets in glass/epoxy composites

This research aims to develop a method for the amalgamation of graphene nanoplatelets in glass/epoxy composites. The poor interface bonding between the fiber and matrix is critical and hinders the full performance of the composites. Glass fabric and epoxy were used as reinforcement and matrix in the composite, respectively. Graphene nanoplatelets were utilized as an additional nano-materials filler for the composites. Glass/graphene/epoxy and glass/epoxy composites were fabricated via vacuum infusion molding. The new method of applying graphene nanoplatelets as secondary reinforcement in the composite was developed based on proper functionalization in the sonication process. The physical, tensile, flexural, and short beam interlaminar properties of fabricated composites were examined to analyze the method's effectiveness. The results showed that density decreased by around 5 %; however, thickness increased by around 34 % after introducing graphene nanoplatelets into the composites. The tensile strength and modulus of the composites declined by approximately 19 %, on the other hand, flexural strength and modulus increased by around 63.3 % and 8.3 %, respectively, after the addition of graphene nanoplatelets into the composites. Moreover, interlaminar shear strength of the composite was enhanced by approximately 50 %.     

Harmonic modification and data adaptive filtering based approach to robust pitch estimation

A novel and robust pitch estimation method is presented in this paper. The basic idea is to reshape the speech signal using a combination of the dominant harmonic modification (DHM) and data adaptive time domain filtering techniques. The noisy speech signal is filtered within the ranges of fundamental frequencies to obtain the pre-filtered signal (PFS). The dominant harmonic (DH) of the PFS is determined and enhanced its amplitude. Normalized autocorrelation function (NACF) is applied to that modified signal. Then empirical mode decomposition (EMD) based data adaptive time domain filtering is applied to the NACF signal. Partial reconstruction is performed in EMD domain. The pitch period is determined from the partially reconstructed signal. The experimental results show that the proposed method performs better than the other recently developed methods for noisy and clean speech signals in terms of gross and fine pitch errors.     

Intelligently tuned wavelet parameters for GPS/INS error estimation

This paper presents a new algorithm for de-noising global positioning system (GPS) and inertial navigation system (INS) data and estimates the INS error using wavelet multi-resolution analysis algorithm (WMRA)-based genetic algorithm (GA) with a well-designed structure appropriate for practical and real time implementations because of its very short training time and elevated accuracy. Different techniques have been implemented to de-noise and estimate the INS and GPS errors. Wavelet de-noising is one of th...     

The performance of multiwavelets based OFDM system under different channel conditions

In wireless communication reception, the reliability of orthogonal frequency division multiplexing (OFDM) is limited because of the time-varying nature of the channel. This causes inter-carrier interference (ICI) and increases inaccuracies in channel tracking. This can effectively be avoided at the cost of power loss and bandwidth expansion by inserting a cyclic prefix guard interval before each block of parallel data symbols. However, this guard interval decreases the spectral efficiency of the OFDM system as the corresponding amount. Recently, it was found that based on Haar-orthonormal wavelets, discrete wavelet-based OFDM (DWT-OFDM) is capable of reducing the inter symbol interference (ISI) and ICI, which are caused by the loss in orthogonality between the carriers. DWT-OFDM can also support much higher spectrum efficiency than discrete Fourier-based OFDM (DFT-OFDM). In this paper the DFT-OFDM is replaced by Multiwavelets OFDM (DMWT-OFDM) in order to further reduce the level of interference and increase spectral efficiency. It is found that proposed Multiwavelet design achieves much lower bit error rates, increases signal to noise power ratio (SNR), and can be used as an alternative to the conventional OFDM. The proposed OFDM system was modeled tested, and its performance was found under different channel conditions.     

Ultra‐fast‐switching flexoelectric liquid‐crystal display with high contrast

Abstract— The flexoelectro‐optic effect provides a fast‐switching mechanism (0.01–0.1 msec), suitable for use in field‐sequential‐color full‐motion‐video displays. An in‐plane electric field is applied to a short‐pitch chiral nematic liquid crystal aligned in the uniform standing helix (or Grandjean) texture. The switching mechanism is experimentally demonstrated in a single‐pixel test cell, and the display performance is investigated as a function of device parameters. A contrast ratio of 2000:1 is predicted.     

Hardware/software co-design of a real-time kernel based tracking system

The probabilistic visual tracking methods using color histograms have been proven to be robust to target model variations and background illumination changes as shown by the recent research. However, the required computational cost is high due to intensive image data processing. The embedded solution of such algorithms become challenging due to high computational power demand and algorithm complexity. This paper presents a hardware/software co-design architecture for implementation of the well-known kernel based mean shift tracking algorithm. The design uses color histogram of the target as tracking feature. The target is searched in the consecutive images by maximizing the statistical match of the color distributions. The target localization is based on gradient based iterative search instead of exhaustive search which makes the system capable of achieving frame rate up to hundreds of frames per second while tracking multiple targets. The design, which is fully standalone, is implemented on a low-cost medium-size field programmable gate array (FPGA) device. The hardware cost of the design is compared with some other tracking systems. The performance of the system in terms of speed is evaluated and compared with the software based implementation. It is expected that the proposed solution will find its utility in applications like embedded automatic video surveillance systems.     

Design and analysis of SSSC-based supplementary damping controller

Power-system stability improvement by a static synchronous series compensator (SSSC)-based damping controller is thoroughly investigated in this paper. The design problem of the proposed controller is formulated as an optimization problem, and real coded genetic algorithm (RCGA) is employed to search for the optimal controller parameters. Both local and remote signals with associated time delays are considered in the present study and a comparison has been made between the two signals. The performances of the proposed controllers are evaluated under different disturbances for both single-machine infinite-bus power system and multi-machine power system. Simulation results are presented and compared with a recently published modern heuristic optimization technique under various disturbances to show the effectiveness and robustness of the proposed approach.