Randomly accessible, multilayered optical memory with a Bi(12)SiO(20) crystal

A read-and-write, randomly accessible, multilayered optical memory with a Bi(12) SiO(20) crystal as the medium is demonstrated. Data are recorded in the crystal as an absorption change that is due to the photochromic effect. These data are successfully recorded, read, and selectively erased in five layers in the crystal. The axial-separation distance between neighboring layers is 30 μm, and the lateral distance between bits is 5 μm. Selective bit erasure of the data is accomplished by illumination of the recorded bit datum with He-Ne laser light. To our knowledge, this is the first successful demonstration of the selective optical erasure of the photochromic effect in a BSO crystal.     

Fundamental characteristics of printed gelatin utilizing micro 3D printer

Gelatin is useful for biofabrication, because it can be used for cell scaffolds and it has unique properties. Therefore, we attempted to fabricate biodevices of gelatin utilizing micro 3D printer which is able to print with high precision. However, it has been difficult to fabricate 3D structure of gelatin utilizing 3D printer, because a printed gelatin droplet on the metal plate electrode would spread before solidification. To clear this problem, we developed a new experimental set-up with a peltier device that can control temperature of the impact point. At an impact point temperature of 80 °C, the spreading of printed gelatin droplets was prevented. Therefore, we were able to print a ball gelatin. In addition, we were able to print a narrower gelatin line than at an impact point temperature of 20 °C.     

A query model to synthesize answer intervals from indexed videounits

While a query result in a traditional database is a subset of the database, in a video database, it is a set of subintervals extracted from the raw video sequence. It is very hard, if not impossible, to predetermine all the queries that will be issued in the future, and all the subintervals that will become necessary to answer them. As a result, conventional query frameworks are not applicable to video databases. We propose a new video query model that computes query results by dynamically synthesizing needed subintervals from fragmentary indexed intervals in the database. We introduce new interval operations required for that computation. We also propose methods to compute relative relevance of synthesized intervals to a given query. A query result is a list of synthesized intervals sorted in the order of their degree of relevance     

Nonsingular BEM formulations for thin-walled structures and elastostatic crack problems

Summary This paper presents a unique approach, named mathematical regularization, to remove the nearly-singular and singular integrals occurring in the boundary integral formulations for the solution of the boundary value problems with a pathologica integration boundary due to the very near or coinciding parts of the total boundary. Nonsingular boundary integral equations are derived for thin-walled structure problems. In the case of crack-like problems, we present two kinds of the nonsingular integral representations of the secondary fields and the derivative boundary integral equations.     

Delayed hypersensitivity in untreated patients with Hodgkin''s disease--with special reference to small lymphocyte counts in the blood

A hundred and thirty patients have been treated with Amitriptylin in the "Clinique de Psychiatrie" in Marseille during the last eight years. The review of the hundred cases for which the information are the most detailed show that Amitriptylin remains one of the most powerful, manageable and well-tolerated anti-depressant drugs available at the present time. Its therapeutic indications are numerous, but the best ones are proceeding from depressed states with high anxious participation in subjects of less that 60 years of age.     

Surface degradation of polyamide nanocomposites caused by partial discharges using IEC (b) electrodes

Partial discharge (PD) degradation of polyamide both without nanoscale fillers (nanofillers) and with 2,4 and 5 wt% additions of nanofillers was investigated. Such materials were subjected to PDs using the IEC (b) electrodes for evaluation. Comparisons were made as to the surface roughness observed by scanning electron microscopy and atomic force microscopy. It was found that the change in the surface roughness is far smaller in specimens with nanofillers than those without nanofillers, and that the 2 wt% addition is sufficient for improvement of the surface roughness. Furthermore, it was elucidated that the difference of surface roughness of the degraded area due to PDs among the specimens originates from the difference in their crystalline structures. These results indicate that polyamide nanocomposite is more resistance to PDs than polyamide without nanofillers.     

Transfer of semicrystalline polymers sliding against a smooth steel surface

The interrelationships between transfer and wear in polymers were studied using a pin-disk-type wear testing apparatus. The wear rates of polymers except polytetrafluoroethylene (PTFE) were high for up to about the first 100 revolutions of the disk and decreased gradually until the steady low wear rates which generally occurred after about 2000 revolutions. However, PTFE exhibited an almost constant high wear rate throughout the wear process. The thickness of transferred polymer increased rapidly with increasing number of revolutions in the initial wear stage but after about several hundred revolutions remained constant. A coherent transfer film was formed in most parts of the friction track after about 100 revolutions. It was found that polymer wear could occur in polymers sliding on a transferred polymer layer. All polymers except PTFE exhibited smaller wear rates when sliding on the transferred layer. The load dependence of the thickness was very small compared with that of the wear rate. PTFE produced a very dense and coherent transferred layer compared with that of other polymers. However, there was no clear relationship between friction and the thickness of the transferred polymer layer.     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Effects of Sampling Tube Geometry on Soft Clayey Sample Quality Evaluated by Nondestructive Methods

Sample disturbance caused by difference in sampling tube geometry was evaluated by two nondestructive methods: the measurement of the residual effective stress (p_r') by ceramic disc; and the use of the bender element to ascertain the shear wave velocity (V_s), and thus the maximum shear modulus (G_BE). Samples were measured under atmosphere, i.e., not under confined stress conditions. The soil samples were obtained from two sources: reconstituted Kasaoka clay prepared in the laboratory, and at the test site at Takuhoku, Hokkaido, Japan. Samplers with different geometrical designs, referring to the Japanese standard stationary piston sampler, were used for the model ground and field sampling. The geometrical effects of the sampling tube, for example, the thickness of the tube wall, the edge angle, and the existence of a piston were carefully examined. The quality of the samples taken with different samplers was evaluated by p_r' and G_BE, values which were normalized by the in situ vertical effective stress (σ'_vo) and G_f measured by the seismic cone test in the field. It was found from these studies that p_r'/σ'_vo and G_BE/G_f vary considerably due to the geometry of the sampler, with the edge angle of sampling tubes being the most important feature in obtaining high quality samples. The wall thickness, and thus, the area ratio of the sampler is not critical to the sample quality if the edge angle is sharp enough. The existence of the piston does not significantly influence the sample quality in field samples. Furthermore, the correlation between G_BE and p_r' was also investigated, and it was found that the two parameters are strongly dependent.     

On-line control of feed-speed in circular sawing

An adaptive control optimization system was developed to produce a desired surface finish roughness by automatic control of the work-piece feed-rate in circular sawing. The system developed in this study consists of the interconnection of an adaptive controller with a numerically controlled circular saw. The AE signals and cutting forces were measured to monitor the machining process continuously in this system. The signals were provided to the adaptive controller to evaluate the surface finish roughness and adjust the workpiece feed-rate automatically in the machining process. Sensing of AE signals and of cutting forces was compared to determine which technique is more convenient. Experiments were carried out with a carbide-tipped circular saw. Cross cutting was done with counter-cutting during the experiments. The cutting parameters controlled were workpiece feed-rates and cutting speeds. Japanese beech (Fagus crenata Blume) and Yezo spruce (Picea jezoensis Carr.) were used as the workpiece. Experimental results indicated that adaptive control optimization took place in the system developed for circular sawing. The desired surface finish roughness was produced by automatic control of the workpiece feed-rate using the sensing technique of AE signals as well as that of cutting force. However, the system using AE signals is more convenient than taht using cutting force.