Organic-inorganic interaction and the growth mechanism of hydroxyapatite crystals in gelatin matrices between 37 and 80 °C

The crystal development of hydroxyapatite[HAp] phase in gelatin[GEL] matrices was investigated in the temperature range 37 to 80 °C by using X-ray diffraction, scanning electron microscopy(SEM), thermoanalytical measurement(DT/TGA), Fourier-Transformed Infra-Red(FT-IR) spectroscopy, and transmission electron microscopy(TEM) with electron diffraction(ED). It was found that during the coprecipitation of apatite phase in GEL matrices and the next aging process the crystallites were formed and developed through the two reaction mechanisms of organic-inorganic interaction between apatite phase and GEL molecules, and thermodynamic reaction for the crystal growing. The analytical evidences showed that there was a definite competition between these two mechanisms with the reaction temperature. Below 50 °C the crystal development of HAp was greatly suppressed by the existence of the GEL molecules, indicating the heterogeneous nucleation by the supposed number of carboxyl groups in GEL. Above 50 °C the effective organic components as a template for the heterogeneous nucleation of apatite crystallites were greatly degraded and so more amount of inorganic ions could be favorably accredited on the preexisting crystallites in virtue of the limited nucleation chance, finally resulting in the crystal growth. At higher temperature pretty big HAp crystals were developed with the depletion of the organics to be bound with crystallites in the slurry solution. Presumably it is believed that the poisoning of the functional groups in GEL molecules was vigorously occurred in the phosphoric acid environment above ∼ 50 °C.     

Orientation dependence of fracture toughness measured by indentation methods and its relation to surface energy in single crystal silicon

Fracture toughness of silicon crystals has been investigated using indentation methods, and their surface energies have been calculated by molecular dynamics (MD). In order to determine the most preferential fracture plane at room temperature among the crystallographic planes containing the 〈001〉, 〈110〉 and 〈111〉 directions, a conical indenter was forced into (001), (110) and (111) silicon wafers at room temperature. Dominant {110}, {111} and {110} cracks were introduced from the indents on (001), (011) and (111) wafers, respectively. Fracture occurs most easily along {110}, {111} and {110} planes among the crystallographic planes containing the 〈001〉, 〈011〉 and 〈111〉 directions, respectively. A series of surface energies of those planes were calculated by MD to confirm the orientation dependence of fracture toughness. The surface energy of the {110} plane is the minimum of 1.50 Jm⁻² among planes containing the 〈001〉 and 〈111〉 directions, respectively, and that of the {111} plane is the minimum of 1.19 Jm⁻² among the planes containing the 〈011〉 direction. Fracture toughness of those planes was also derived from the calculated surface energies. It was shown that the K _IC value of the {110} crack plane was the minimum among those for the planes containing the 〈001〉 and 〈111〉 directions, respectively, and that K _IC value of the {111} crack plane was the minimum among those for the planes containing the 〈011〉 direction. These results are in good agreement with that obtained conical indentation.     

Rugate filters fabricated by a radio frequency magnetron sputtering system by use of an optical in situ monitoring technique

We propose, for the first time to our knowledge, a new feedback fabrication technique for rugate filters with sinusoidal refractive index distribution. The technique uses an in situ optical monitoring system, in contrast to conventional techniques for rugate filters that are based on time control, which is generally unsuitable for accurate fabrication of a continuous index distribution. We employed a-SiOx:H thin film as the material for the rugate filters because its refractive index can be successively controlled. Using the proposed technique and material, we fabricated near-infrared rugate minus filters having multiple and continuous refractive index distributions. The experimental and calculated spectra were well correlated as a result of applying the proposed feedback fabrication technique.     

On-chip cell sorting system using laser-induced heating of a thermoreversible gelation polymer to control flow

We have developed a microfabricated fluorescence-activated cell sorter system using a thermoreversible gelation polymer (TGP) as a switching valve. The glass sorter chip has Y-shaped microchannels with one inlet and two outlets. A biological specimen containing fluorescently labeled cells is mixed with a solution containing a thermoreversible sol-gel polymer. The mixed solution is then introduced into the sorter chip through the inlet. The sol-gel transformation was locally induced by site-directed infrared laser irradiation to plug one of the outlets. The fluorescently labeled target cells were detected with sensitive fluorescence microscopy. In the absence of a fluorescence signal, the collection channel is plugged through laser irradiation of the TGP and the specimens are directed to the waste channel. Upon detection of a fluorescence signal from the target cells, the laser beam is then used to plug the waste channel, allowing the fluorescent cells to be channeled into the collection reservoir. The response time of the sol-gel transformation was 3 ms, and a flow switching time of 120 ms was achieved. Using this system, we have demonstrated the sorting of fluorescent microspheres and Escherichia coli cells expressing fluorescent proteins. These cells were found to be viable after extraction from the sorting system, indicating no damage to the cells.     

Experimental study of perforation and cracking of water-filled aluminum tubes impacted by steel spheres

Water-filled aluminum tubes were subjected to impact by six steel spherical projectiles of different diameters at impact velocities of 40–200 m/s. The effects of the diameter of the steel projectiles and of the material properties of the tubes on cracking and perforation were discussed. Water decreased the wall strength of the aluminum alloy tubes, and the impact velocity at which a steel projectile first passes through the tube wall decreased with increasing diameter of the steel projectile. Using the velocity at which the steel projectile perforates the tube wall, empirical equations of the energies required to perforate the tube wall were derived. Also, the energy balance in the steel projectile during a collision is discussed referring to the pressure history in the filled water and the velocities of the steel projectile before and after collision.     

Selective elimination of lead(II) ions by alginate/polyurethane composite foams

A new type of adsorbent which is capable of selectively adsorbing lead(II) ions (Pb(2+)) was developed. The adsorbent was generated by reaction of sodium alginate with NB-9000B, a polyisocyanate type of prepolymer of polyurethane. The adsorbent was a hydrophilic and flexible alginate/polyurethane composite foam (ALG/PUCF) with the alginate chemically immobilized in the cell walls of the foam. Acid-base titration was used to quantify the concentration of carboxyl groups, which are present on the alginate molecules of the ALG/PUCF, functioning as the essential sites for binding Pb(2+). For the optimized ALG/PUCF, the carboxyl was found to be 38.2+/-1.2mumol/g of dry weight. The capacity for adsorbing Pb(2+) ions in 1.0g of dry weight of the optimized ALG/PUCF was found to be 16.0+/-2.1mumol, indicating that ion exchange was the essential mechanism for adsorbing Pb(2+) ions. The adsorption capacity was found to be highly sensitive to the pH of the sample solution; lower pH (<3) significantly decreased the adsorption. Competing ions such as Mg(2+), Ca(2+), and Cd(2+) also caused a decrease in selectivity and capacity for Pb(2+) adsorption, although the effect was less pronounced than the effect of pH. The ALG/PUCF is highly stable, flexible and easy to use. ALG/PUCF is also reusable after regeneration with ethylenediamine-N,N,N',N'-tetraacetic acid, disodium salt (EDTA-2Na). Due to these features, this adsorbent may be highly useful for elimination of Pb(2+) ions from contaminated water.     

Fracture toughness measurement with fatigue-precracked single edge-notched beam specimens of WC-Co hard metal

The plain-strain fracture toughness of WC-8%Co hard metal, K _IC, was measured using single edge-notched beam (SENB) specimens with fatigue precrack. The fatigue precrack was introduced with compressive fatigue cycling in four-point bending at room temperature. Since stable fatigue-crack propagation was obtained from the notch tip, it was easy to control the fatigue-precrack length. A reasonable K _IC value of 13.3 MPa m^1/2 was obtained with the fatigue-precracked SENB specimens in four-point bending. The compressive fatigue-precracking technique in four-point bending was simple and convenient, and is therefore applicable to precracking in a variety of brittle materials prior to fracture-toughness measurements.     

Multivariate curve resolution analysis on the multi-component water sorption process into a poly(2-methoxyethyl acrylate) film

In our previous study, sorption process of water into a biocompatible polymer film, poly(2-methoxyethyl acrylate) (PMEA) was monitored by time-resolved in situ attenuated total reflection infrared (ATR-IR) spectroscopy [S. Morita, et al., Langmuir 23, 3750 (2007)]. In the present study, noisy and heavily overlapped O-H stretching vibrational bands of diffusing water have been analyzed from the series spectra where the spectral shapes change irregularly with time. In spite of these complications, a powerful spectral analysis technique, multivariate curve resolution (MCR) by means of alternating least squares (ALS), yielded smooth and meaningful pure component spectra and detailed kinetic sorption profiles of each component, excluding noise. Ordinary smoothing techniques and Gaussian curve fitting would not achieve these significant results. The quantification of the kinetic parameters such as amplitudes (a) and relaxation time constants (tau) is significant for the systematic development of biocompatible materials and also for revealing the mechanisms of biocompatibility of a material. Moreover, the ratios of coefficients of each component at saturation corresponded well to the values obtained by Tanaka et al. measured by gravimetric analysis. This study is the first to report the detailed concentration profile of each water component whose sorption kinetics is discussed comprehensively.     

Transport of single cells using an actin bundle-myosin bionanomotor transport system

The potential of using actin bundles for the transport of liposomes and single cells across myosin-coated surfaces is investigated. Compared to that observed with filamentous actin, the liposome transport using actin bundles was more linear in nature and able to occur over longer distances. Bundles, but not filamentous actin, were capable of moving single cells. Cargo unloading from bundles was achieved by incubation with Triton X-100. These data suggest that actin bundling may improve the ability of the myosin motor system for nanotransport applications.     

High-performance antireflective coatings with a porous nanoparticle layer for visible wavelengths

Ghosts and flares are well-known problems that are caused by reflections from lens surfaces when we take photographs. It is more difficult to prevent such stray light in a digital camera than in a film camera because of high reflectance from the low-pass filter and diffraction from the image sensor. To prevent such stray light, we introduce an ultralow refractive index layer into the antireflective (AR) coatings. We used the solgel method to form porous fluoride layers with ultralow refractive indices, and we succeeded in developing a unique process to form AR coatings with superior performance.