Development of non-enzymatic ZnO nanocomposite-based optical sensor for l-lactate detection in tomato samples

l -lactate is a conjugate base of α-hydroxy acid, a key organic chemical in food processing, fermentation, biology and chemical industries. We are reporting for the first time a facile and rapid non-enzymatic nanosensor for l -lactate detection in tomato-based products using 3-aminophenylboronic acid (3-APBA)-added zinc oxide nanoparticles (ZnO NPs). 3-APBA-functionalised ZnO NPs have a selective and stable SPR intensity change at pH 5.5 to 7.5 and forms a reversible ester with bound l -lactate revealing the wavelength shift from λ = 300 nm to 288 nm in UV-VIS absorption spectrometry. In the spiked (2.5–20 mm ) samples of tomato puree, absorption peak increased as per l -lactate addition with the lower detection limit of 3.98 mm . l -lactate binds with a trigonal form of 3-boronate, thereby generating the tetrahedral complex. ZnO NPs stabilise the tetragonal complex. Nanosensor validated with standard HPLC. This method is useful for l -lactate detection and alternates to conventional techniques.     

A computationally efficient approach for hidden-Markov model-augmented fingerprint-based positioning

This paper presents a computationally efficient approach for mobile subscriber position estimation in wireless networks. A method of data scaling assisted by timing adjust is introduced in fingerprint-based location estimation under a framework which allows for minimising computational cost. The proposed method maintains a comparable level of accuracy to the traditional case where no data scaling is used and is evaluated in a simulated environment under varying channel conditions. The proposed scheme is studied when it is augmented by a hidden-Markov model to match the internal parameters to the channel conditions that present, thus minimising computational cost while maximising accuracy. Furthermore, the timing adjust quantity, available in modern wireless signalling messages, is shown to be able to further reduce computational cost and increase accuracy when available. The results may be seen as a significant step towards integrating advanced position-based modelling with power-sensitive mobile devices.     

Single-electron transfer living radical copolymerization of SWCNT-g-PMMA via graft from approach

The sidewall functionalization of single-walled carbon nanotubes (SWCNTs) was established by poly (methyl methacrylate) (PMMA) using controlled radical polymerization (CRP) method. A bromide functionalized SWCNT (SWCNT-Br) has been used as an initiator for the synthesis of SWCNT-graft-PMMA (SWCNT-g-PMMA). The efficiency of the sacrificial initiator (S) was monitored during the polymerization process. The obtained polymers possess a uniform distribution of molecular weight with a lower polydispersity index of 1.36. The SWCNTs-based initiator acts as an efficient medium for the controlled growth of polymer on the SWCNTs surfaces. The presence of bimodal gel permeation chromatographic (GPC) curve for the SWCNT-g-PMMA(S) obtained through sacrificial initiator (S) confirms uncontrolled behavior. However, the clear sharp peak for SWCNT-g-PMMA obtained without sacrificial initiator shows its well-controlled process of polymerization, which acts as a mimic to bone cement. The efficiency of the functionalization of SWCNT and the controlled formation of SWCNT-g-PMMA composites were characterized by TGA, Raman, TEM, NMR, XPS and dispersion measurements.     

Polyaniline‐modified cellulose nanofibrils as reinforcement of a smart polyurethane

Segmented polyurethanes exhibiting shape memory properties were modified by the addition of polyaniline (PANI)‐coated cellulose nanofibrils (CNFs). The two‐phase structure of the polymer is responsible for the material's ability to ‘remember’ and autonomously recover its original shape after being deformed in response to an external thermal stimulus. PANI was grown on the surface of the CNFs via in situ polymerization. Modified nanocrystals were added to the segmented polyurethane in concentrations ranging from 0 to 15 wt%. The changes in the material properties associated with the percolation of the coated fibrils appear at higher concentrations than previously observed for non‐modified CNFs, which suggests that fibril agglomeration is occurring due to the PANI coating. The shape memory behavior of the composites is maintained at about the same level as that of the unfilled polyurethane only up to 4 wt% of fibrils. At higher concentrations, the rigidity of the nanofibrils as well as their interaction with the hard‐segment phase and the increasing difficulty of dispersing them in the polymer collaborate to produce early breakage of the specimens when stretched at temperatures above the melting point of the soft segments. Copyright © 2010 Society of Chemical Industry     

Photoelectrochemical properties of CdSxSe1−x films

CdS_xSe_1−x films of different composition (0 < x < 1) were deposited by pulse plating technique at different duty cycles in the range of 10-50%. The films were polycrystalline and exhibited hexagonal structure. The band gap of the films varies from 1.68 to 2.39 eV as the concentration of CdS increases. Energy Dispersive analysis of X-rays (EDAX) measurements indicate that the composition of the films are nearly the same as that of the precursors considered for the deposition. Atomic force microscopy studies indicated that the grain size increased from 20 to 200 nm as the concentration of CdSe increased. Photoelectrochemical (PEC) cell studies indicated that the films of composition CdS_0.9Se_0.1 exhibited maximum photoactivity. Mott-Schottky studies indicated that the films exhibit n-type behaviour. Spectral response measurements indicated that the photocurrent maxima occurred at the wavelength value corresponding to the band gap of the films.     

Electrostatic assembly of nanoparticles and biomacromolecules

The controlled assembly of nanoparticles in thin film form on solid supports, both as monolayers and as superlattice structures, is a problem of considerable topical interest. Among the many interactions used to program the assembly of nanoparticles, electrostatic forces are particularly interesting for many reasons. This Account deals with assembling surface-modified nanoparticles in thin film form using electrostatic interactions at the air-water interface and in thermally evaporated lipid films. The generality of the electrostatic assembly protocol is demonstrated in the immobilization of DNA and proteins in lipid films.     

Thermomechanical Framework for the Constitutive Modeling of Asphalt Concrete

This study is concerned with the constitutive modeling of asphalt concrete. Unlike most constitutive models for asphalt concrete that do not take into account the evolution of the microstructure of the material, this study incorporates the evolution of the microstructure by using a framework that recognizes that a body’s natural configurations can evolve as the microstructure changes. The general framework, on which this study is based, is cast within a full thermomechanical setting. In this paper, we develop models within the context of a mechanical framework that stems from the general framework for models based on the full thermodynamic framework and the resulting equations represent a nonlinear rate type viscoelastic model. The creep and stress relaxation experiments of Monismith and Secor are used for validating the efficacy of the model, and it is found that the predictions of the theory agree very well with the available experimental results. The advantages of using such a framework are many, especially when one wants to model the diverse mechanical and thermodynamic response characteristics of asphalt and asphalt concrete.     

Analysis of 59 cases of non-traumatic sudden death in various neurological diseases]

Sudden death is a common complication of myocardial infarction, necrotic pancreatitis and other diseases. Physicians usually neglect the possibility of neurological disorders. 59 cases of sudden death among 314 autopsied cases with neurological diseases were analyzed. The most frequent cause of neurological sudden death was cerebrovascular disease (CVD). It was present in 53 (89.9%) cases. 48 of them had hemorrhagic CVD. 37 of these 48 cases were due to hypothalamic lesions. In 37 cases general autopsy was performed; pathological abnormalities of heart, lungs, stomach etc, were found in 28 of them. In conclusion, the size and location of the lesion correlated with the prognosis of the disease. Concomitant multiple organ damage may deteriorate the lesion. Awareness of sudden death resulting from CVD may elevate the rate of correct diagnosis.     

Detection of extrathoracic metastases by positron emission tomography in lung cancer

BACKGROUND: Accurate staging of non-small cell lung cancer is essential for treatment planning. We evaluated in a prospective study the role of whole-body 2-[18F]fluoro-2-deoxy-D-glucose (FDG) positron emission tomography (PET) in mediastinal nodal staging with a positive predictive value of 96%. The study was continued to further evaluate the value of whole-body FDG PET in detecting unexpected extrathoracic metastases (ETMs) in patients qualifying for surgical treatment by conventional staging. METHODS: One hundred patients underwent clinical evaluation, chest and upper abdominal computed tomography scan, mediastinoscopy (lymph nodes greater than 1 cm on computed tomography), and routine laboratory tests. In 94 patients with stage IIIa or less and 6 with suspected N3 a whole-body FDG PET was performed. If clinical signs of ETMs were present additional diagnostic methods were applied. All findings in the FDG PET were confirmed histologically or radiologically. RESULTS: Unexpected ETMs were detected in 13 (14%) of 94 patients (stage IIIa or less) at 14 sites. In addition 6 of 94 patients were restaged up to N3 after PET. The suspected N3 disease (stage IIIb) on computed tomography was confirmed by PET in all 6 patients. There was no false positive finding of ETM. Weight loss was correlated with the occurrence of ETM: more than 5 kg, 5 of 13 patients (38%); more than 10 kg, 4 of 6 patients (67%). Pathologic laboratory findings were not predictive for ETM. CONCLUSIONS: Whole-body FDG PET improves detection of ETMs in patients with non-small cell lung cancer otherwise elegible for operation. In 14% of patients (stage IIIa or less), ETMs were detected, and in total, 20% of the patients were understaged.