Fas-independent and nonapoptotic cytotoxicity mediated by a human CD4(+) T-cell clone directed against an acute myelogenous leukemia-associated DEK-CAN fusion peptide

The mechanism underlying the cytotoxicity mediated by a human CD4(+) cytotoxic T-lymphocyte (CTL) clone directed against a peptide derived from the acute myelogenous leukemia-associated fusion protein, DEK-CAN, was investigated. A DEK-CAN fusion peptide-specific CD4(+) Th0 CTL clone, designated HO-1, was established from the peripheral blood lymphocytes of a healthy individual. HO-1 exerted direct but not "innocent bystander" cytotoxicity within 2 hours. The cytotoxicity mediated by HO-1 was completely Ca2+-dependent. Because HO-1 lysed peptide-loaded Fas-deficient target cells derived from a patient with a homozygous Fas gene mutation, its cytotoxicity appeared to be mediated by a Fas-independent pathway. In addition, its cytotoxicity was only partially inhibited by treatment with concanamycin A and strontium ions, which are inhibitors of the perforin-based cytotoxic pathway. Although membrane-bound type of tumor necrosis factor-alpha (TNF-alpha) was expressed on HO-1, an anti-TNF-alpha antibody had no effect on HO-1-mediated cytotoxicity. HO-1 expressed mRNA for apoptosis-inducing mediators, including perforin, granzyme B, Fas ligand, TNF-alpha, and lymphotoxin; however, no DNA fragmentation was detected in target cells incubated with HO-1 by 5-[125I]Iodo-2'-deoxyuridine release assay and agarose gel electrophoresis of DNA. Although it has been suggested that the Fas/Fas ligand system is the main pathway by which CD4(+) CTL-mediated cytotoxicity is exerted in murine systems, HO-1 produced peptide-specific and HLA-restricted cytotoxicity via a Fas-independent and nonapoptotic pathway. The present study thus describes a novel mechanism of cytotoxicity mediated by CD4(+) CTL.     

Main R&D issues for fast reactor structural design standard

For realization of economical and reliable fast reactor (FR) plants, the Japan Atomic Energy Agency (JAEA) and the Japan Atomic Power Company (JAPC) are cooperating on the “Feasibility Study on Commercialized FR Cycle Systems”. To certify the design concepts through evaluation of the structural integrity of FR plants, the research and development of the “Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)” is recognized as an essential theme. The FDS focuses on particular failure modes of FRs such as ratchet deformation and creep-fatigue damage due to cyclic thermal loads. For precise evaluation of these modes, the research and development for three main issues is in progress. First, the “Refinement of Failure Criteria” needs to be addressed for particular failure modes of FRs. Secondly, the development of “Guidelines for Inelastic Design Analysis” is conducted to predict elastic plastic and creep deformation under elevated temperature conditions. Lastly, efforts are being made toward preparing “Guidelines for Thermal Load Modeling” for the design of FR components where thermal loads are dominant.     

A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

Static Coarse Grain Task Scheduling with Cache Optimization Using OpenMP

Effective use of cache memory is getting more important with increasing gap between the processor speed and memory access speed. Also, use of multigrain parallelism is getting more important to improve effective performance beyond the limitation of loop iteration level parallelism. Considering these factors, this paper proposes a coarse grain task static scheduling scheme considering cache optimization. The proposed scheme schedules coarse grain tasks to threads so that shared data among coarse grain tasks can be passed via cache after task and data decomposition considering cache size at compile time. It is implemented on OSCAR Fortran multigrain parallelizing compiler and evaluated on Sun Ultra80 four-processor SMP workstation using Swim and Tomcatv from the SPEC fp 95. As the results, the proposed scheme gives us 4.56 times speedup for Swim and 2.37 times on 4 processors for Tomcatv respectively against the Sun Forte HPC Ver. 6 update 1 loop parallelizing compiler.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

1Introduction Themostimportantrequirementofapercutaneous deviceisthepreventionofbacterialinfectionthroughtheinterfacebetweenthematerialandtheskin.Therefore,a percutaneousdevicehastoadherefirmlytoskintissueandpreventepidermaldowngrowth.Previously,Aokietalp…     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly（ ethylene terephthalate ） （PET） and polyethylene （PE） as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with laminin （ LCP solution ）. The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin-apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite coruposite coating.     

Oxygen permeation properties and surface modification of acceptor-doped CeO2/MnFe2O4 composites

The preparation and oxygen permeation properties of the (Ce_0.8Pr_0.2)O_2−δ − x vol% MnFe₂O₄ composites, where x = 0 to 35, have been investigated. The samples were prepared by the Pechini method. In the case of Ce_0.8Pr_0.2O_2−δ, an oxygen flux density of 6 μmol⋅cm⁻²⋅s⁻¹ (L = 0.0247 cm) and the maximum methane conversion of 50% were attained at 1000^∘C. Unlike composites consisting of Gd-doped CeO₂ and MnFe₂O₄, the oxygen permeability of the (Ce_0.8Pr_0.2)O_2−δ – x vol% MnFe₂O₄ composites was almost constant regardless of the volume fraction of MnFe₂O₄; however, the optimum volume fraction of MnFe₂O₄ was determined to be 5 to 25 in the context of the chemical and mechanical stabilities under methane conversion atmosphere. In addition, the surface modification of the (Ce_0.8Gd_0.2)O_2−δ – 15 vol% MnFe₂O₄ composite was performed by using the FePt nanoparticles. The catalyst loading of 2.8 mg/cm² on the both side of the 0.3 mm-thick (Ce_0.8Gd_0.2)O_2−δ – 15vol% MnFe₂O₄ composite increased the oxygen flux density from 0.30 to 0.76 μmol⋅cm⁻²⋅s⁻¹ in the case of He/air gradients; however, the effect seems to be reduced in the case of high oxygen flux density caused by a large pO₂ gradient. Moreover, the Langmuir-Blodgett film of the FePt nanoparticles were successfully prepared on the tape-cast (Ce_0.8Gd_0.2)O_2−δ – 15vol% MnFe₂O₄ composite. Hydrophobic treatments for the surface of the composite were crucial to achieve high transfer ratio for the deposition of the LB film.     

A channel-number insensitive erbium-doped fiber amplifier withautomatic gain and power regulation function

The design scheme for an erbium-doped fiber amplifier (EDFA) with automatic channel-by-channel gain and power regulation function is discussed with much emphasis on the pump power control scheme and the requirement for feedback circuitry. Based on both wavelength and time-resolved simulation technique, an amplifier repeater employing novel high-speed automatic gain control (AGC) and automatic level control (ALC) functions is designed and implemented. The AGC and ALC scheme can suppress the transient power fluctuation of a surviving channel caused by adding or dropping all other channels less than 0.45 dB and keep output power constant over 9-dB input power range     

High-speed DCFL circuits with very shallow junction GaAs JFETs

High-speed DCFL (direct-coupled FET logic) circuits implemented with advanced GaAs enhancement-mode J-FETs are discussed. A divide-by-four static frequency divider operates at up to 6 GHz with a power consumption of 20 mW/flip-flop. A high channel concentration of more than 1×10¹⁸ cm^-3 together with a very shallow junction depth of less than 30 nm for the p⁺-gate results in a transconductance as high as 340 mS/mm at a gate length of 0.8 μm. Open-tube diffusion of Zn using diethylzinc and arsine makes it possible to control a very shallow p⁺-layer less than 10 nm thick. The propagation delay time, as measured with a ring oscillator, was 22 ps/gate with a power consumption of 0.42 mW/gate     

Denture base materials reinforced with glass fibres

Glass fibres for industrial use were laid on denture base materials such as self-curing and heat-curing resins to reinforce them. The use of heat-curing rather than self-curing resin as a base resin indicated a superior effect on bending properties.