三轴光纤陀螺测控装置

光纤陀螺测控装备主要是检测陀螺的性能指标,保障陀螺的精确度和稳定性.论文介绍了一套三轴光纤陀螺测控装置,采用美国NI公司生产的计数器卡和多功能数据采集卡以及研华公司的工控机搭建硬件平台,采用LabVIEW编程语言实现软件部分的测试功能.三轴光纤陀螺测控装置通过主控计算机对三轴转台的运动模式进行控制,给被测三轴光纤陀螺提供所需的电源和时钟信号,同时对产品27V供电电压和电流进行实时监测和保护,并对产品的六路输入、输出信号进行隔离、调理,通过设定的测试程序自动采集并存储,然后对测试数据进行建模和计算,获得被测产品的各项性能参数.从而实现了三轴光纤陀螺的性能指标测试,具有良好的可视化人机交互界面.     

Synthesis and Characterization of Segmented Block Copolymers Based on Hydroxyl‐Terminated Liquid Natural Rubber and α,ω‐Diisocyanato Telechelics

Summary: Segmented block copolymers, consisting of non‐polar soft segments from hydroxyl‐terminated liquid natural rubber (HTNR) and polar hard segments from α,ω‐diisocyanato telechelics obtained by “criss‐cross”‐cycloaddition, have been synthesized. The block copolymer formation took place under relatively mild reaction conditions at 80 °C in dichloroethane in the presence of dibutyltin dilaurate as a catalyst. The resulting block copolymers were characterized by spectroscopic techniques (¹H NMR, FTIR, UV‐vis spectroscopy) as well as GPC for molar mass determination. The block copolymers were compression molded in a hot stage press, and the resulting samples were characterized by DSC and stress‐strain measurement. The solubility and phase morphology of the materials have also been studied.

Segmented block copolymer from HTNR and α,ω‐diisocyanato telechelics     

Distributions of Crystal Size from DSC Melting Traces for Polyethylenes

Melting curves, obtained by differential scanning calorimetry, are used to estimate crystal size distributions. The proposed theoretical analysis is applied to different types of polyethylene, including high‐density polyethylene (HDPE), metallocene catalyzed linear low‐density polyethylenes (m‐LLDPE), blends of m‐LLDPEs, and Ziegler‐Natta catalyzed LLDPEs (ZN‐LLDPE). Theoretical predictions are in agreement with experimental results. A generalized melting temperature equation successfully predicts the melting temperatures of all the LLDPEs, although it was initially proposed for homogeneous copolymers with excluded comonomers. A new definition of the heat of fusion for pure crystals is proposed. This heat of fusion can be calculated from the average crystal size or the crystal size number distribution.     

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006     

Synthesis of syndiotacticity‐rich high molecular weight poly(vinyl alcohol) by suspension polymerization of vinyl pivalate and saponification

Vinyl pivalate (VPi) was suspension‐polymerized to synthesize high molecular weight (HMW) poly(vinyl pivalate) (PVPi) with a high conversion above 95% for a precursor of syndiotacticity‐rich HMW poly(vinyl alcohol) (PVA). Also, the effects of the polymerization conditions on the conversion, molecular weight, and degree of branching (DB) of PVPi and PVA prepared by the saponification of PVPi were investigated. Bulk polymerization was slightly superior to suspension polymerization in increasing the molecular weight of PVA. On the other hand, the latter was absolutely superior to the former in increasing the conversion of the polymer, indicating that the suspension polymerization rate of VPi was faster than that of the bulk one. These effects could be explained by a kinetic order of a 2,2′‐azobis(2,4‐dimethylvaleronitrile) concentration calculated by the initial rate method. Suspension polymerization of VPi at 55°C by controlling various polymerization factors proved to be successful in preparing PVA of HMW [number‐average degree of polymerization (P_n): 8200–10,500], high syndiotactic diad content (58%), and very high yield (ultimate conversion of VPi into PVPi: 94–98%). In the case of the bulk polymerization of VPi at the same conditions, the maximum P_n and conversion of 10,700–11,800 and 32–43% were obtained, respectively. The DB was lower and the P_n was higher with PVA prepared from PVPi polymerized at lower initiator concentrations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 832–839, 2003     

Preparation of water‐soluble syndiotacticity‐rich high molecular weight poly(vinyl alcohol) microfibrillar fibers using copolymerization of vinyl pivalate and vinyl acetate and saponification

Water‐soluble high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (s‐PVA) microfibrillar fibers were prepared by the saponification with various conditions such as amount of alkali solution, saponification temperature, and saponification concentration from copoly(vinyl pivalate (VPi)/vinyl acetate (VAc)) copolymerized using various VPi/VAc feed ratios. To produce s‐PVA microbrillar fibers having various water‐soluble temperatures for many industrial applications, the intrinsic viscosities, syndiotactic diad (S‐diad) contents, and degrees of saponification (DS)s of PVAs were finely controlled to 1.2–3.6 dL/g, 56.3–58.3%, and 91.4–98.3%, respectively. Through a series of experiments, it was found that the amount of alkali may alter the structure of the saponified polymers, primarily the DS, and the structural variation changes viscosity. That is, intrinsic viscosity was sharply decreased as the amount of alkali solution was increased. DS was increased with an increase in the amount of alkali solution. S‐diad content was increased with an increase in the VPi content. HMW s‐PVA microfibrillar fibers having S‐diad content of 56.3–58.3% prepared by the saponification of copoly(VPi/VAc) were completely soluble in water at 100°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1482–1487, 2003     

PSA performances and viscoelastic properties of SIS‐based PSA blends with H‐DCPD tackifiers

Hotmelt pressure sensitive adhesives (PSAs) usually contain styrenic block copolymers like styrene–isoprene–styrene (SIS), SBS, SEBS, tackifier, oil, and additives. These block copolymers individually reveal no tack. Therefore, a tackifier is a low molecular weight material with high glass transition temperature (T_g), and imparts the tacky property to PSA. The SIS block copolymer with different diblocks was blended with hydrogenated dicyclopentadiene (H‐DCPD tackifier), which has three kinds of T_g. PSA performance was evaluated by probe tack, peel strength, and shear adhesion failure temperature. PSA is a viscoelastic material, so that its performance is significantly related to the viscoelastic properties of PSAs. We tested the viscoelastic properties by dynamic mechanical analysis and the thermal properties by differential scanning calorimeter to investigate the relation between viscoelastic properties and PSA performance. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2839–2846, 2006     

边坡锚固工程分析中的水平条分法

对目前中国规范推荐用于边坡加固计算的垂直条分传递系数法进行研究,发现将该方法用于边坡锚固受力分析时,不仅存在垂直条块与加固结构体（锚杆和锚索）相互交叉,而且计算得出的锚固力与加固体的实际锚固力存在偏差等缺陷。在相关资料提出的、用于加筋土稳定性分析的水平条分法基础上,结合边坡锚固工程的特点,将该水平条分法做进一步拓展,使其能适用于锚杆和锚索等边坡锚固工程的稳定性计算,并通过工程实例对拓展后的水平条分法进行了验证。     

全民阅读与读者服务的研究

借鉴国内外图书馆阅读推广与全民阅读的理论与实践经验,系统研究国家图书馆学的理论体系,运用案例调查、图书馆学的原理和方法,立足于江西省区域图书馆服务于居民阅读的实际现状,结合国家和东部地区的有益经验政策,构建一种新型的图书馆创新服务体系以及图书馆信息化建设与评估的机制。     

CJ18．2tex赛络纱的生产实践

阐述了赛络纺纱技术的原理,探讨了F1510细纱机改造赛络纺的方法,优选了工艺参数．试验结果表明,在相同的配棉条件下,CJ18．2tex赛络纱的条干、粗细节、强力和毛羽均优于相同线密度的传统环锭纱．