Global buckling of composite structural insulated wall panels

This paper presents a new type of composites structural insulated panels (CSIPs) for structural wall applications. The proposed composite panel is made of low-cost thermoplastic orthotropic glass/poly-propylene (glass–PP) laminate as a facesheet and expanded polystyrene foam (EPS) as a core with very high facesheet/core moduli ratio. The proposed CSIP walls are intended to overcome problems of traditional Structural Insulated Panels (SIPs) such as termite attack, mold buildups and poor penetration resistance against wind borne debris. This paper investigates the behavior of CSIPs under concentric and eccentric loading. CSIPs specimens failed by global buckling mode in which no debonding was observed. The eccentric specimens failed at load 35% lower than that of the concentric ones. Global buckling formulas for concentric and eccentric loading were presented and validated using the experimental results and were in a good agreement. An equivalent stiffness formula was also developed for sandwich wall under in-plane loading considering the shear deformations effect of the core. Design study for CSIP walls is also presented to help in designing this new type of composite panels.     

Effects of QD concentrations and thermal annealing on the performance of self-assembly QD-OLEDs

We have fabricated and investigated the effect of CdSe/ZnS quantum dot (QD) concentrations on the performance of self-assembly hybrid inorganic/organic light emitting diodes (QD-OLEDs). The uniform distribution of QDs with controllable density was achieved using the conventional spin-coating method. There was a QD threshold concentration for the emission of QDs in QD-OLED. Below that threshold concentration we did not observe the QD emission from the QD-OLED. The best performance of QD-OLED was found for the QD concentration of -9 x 10(11) cm(-2). The QD electroluminescence intensity was increased about three times after the annealing of QD-OLED at 80 degrees C for about 20 minutes in nitrogen atmosphere. The QD electroluminescence peak energy was remain same before and after the annealing of QD-OLED. The maximum external quantum efficiency was around 2.1%. The effect of process parameters and the QD emission mechanism are discussed.     

Phase, microstructure and dielectric properties of 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 ceramics prepared by sol-gel technique

0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ ceramics were fabricated by sol-gel technique. The XRD results revealed the formation of a single phase perovskite structured Bi_0.5Na_0.5TiO₃-BaTiO₃ at 600 °C. The SEM images showed dense microstructure and the optimum density of the ceramics sintered at 1100 °C was 5.2 g/cm³. The saturation polarization (P _s ) was found to be increased with increasing temperature while the remnant polarization (P _r ) was found to be increased gradually and then decreased abruptly near 85 °C, which could be attributed to the phase transformation. The coercive electric field (E _c ) was found to be decreased gradually with increasing temperature. The maximum value of dielectric constant (? _r ) at room temperature was 800 and dielectric loss at 1 MHz was 0.07.     

Estimation of the surface velocity of debris flow with computer-based spatial filtering

A computer-based spatial-filtering velocimeter to measure the surface velocity of natural debris flow is described. This is a simple and interesting technique implemented with a spatial filter constructed as a software program that processes the video image of debris flow instead of a hardware implementation. The surface velocity of the debris flow at the Mt. Yakedake Volcano, Japan, was estimated by this computer-based spatial-filtering method, and the results were compared with those obtained by a hardware-based spatial-filtering method. Computer-based spatial filtering has the important advantage of a capability for tuning the spatial-filter parameters to the target flow.     

Royal Crown Shaped Polarization Insensitive Perfect Metamaterial Absorber for C-, X-, and Ku-Band Applications

This study proposed a new royal crown-shaped polarisation insensitive double negative triple band microwave range electromagnetic metamaterial absorber (MA). The primary purpose of this study is to utilise the exotic characteristics of this perfect metamaterial absorber (PMA) for microwave wireless communications. The fundamental unit cell of the proposed MA consists of two pentagonal-shaped resonators and two inverse C-shaped metallic components surrounded by a split ring resonator (SRR). The bottom thin copper deposit and upper metallic resonator surface are disjoined by an FR-4 dielectric substrate with 1.6 mm thickness. The CST MW studio, a high-frequency electromagnetic simulator has been deployed for numerical simulation of the unit cell in the frequency range of 4 to 14 GHz. In the TE mode, the offered MA structure demonstrated three different absorption peaks at 6.85 GHz (C-band), 8.87 GHz (X-band), and 12.03 GHz (Ku-band), with 96.82%, 99.24%, and 99.43% absorptivity, respectively. The electric field, magnetic field, and surface current distribution were analysed using Maxwell’s-Curl equations, whereas the angle sensitivity was investigated to comprehend the absorption mechanism of the proposed absorber. The numerical results were verified using the Ansys HFSS (high-frequency structure simulator) and ADS (advanced design system) for equivalent circuit models. Moreover, the proposed MA is polarisation and incident angle independent. Hence, the application of this MA can be extended to a great extent, including airborne radar applications, defence, and stealth-coating technology.     

Improved quadtree image segmentation approach to region information

Images are full of information and most often, little information is desired for subsequent processing. Hence, region of interest has key importance in image processing. Quadtree image segmentation has been widely used in many image processing applications to locate the region of interest for further processing. There are also variable block-size image coding techniques to effectively reduce the number of transmitted parts. This paper presents quadtree partition technique as a pre-processing step in image processing to determine what part should be more heterogeneous than the others. It also introduces an idea to solve the problem of squared images. Finally, proposed approach is implemented and analysed. The simulation of the Matlab code of the quadtree is represented by all algorithms and the figures. Thus, achieved results are promising in the state of the art.     

Protein kinase B/Akt mediates effects of insulin on hepatic insulin-like growth factor-binding protein-1 gene expression through a conserved insulin response sequence

Insulin regulates the expression of multiple hepatic genes through a conserved insulin response sequence (IRS) (CAAAAC/TAA) by an as yet undetermined mechanism. Protein kinase B/Akt (PKB/Akt), a member of the PKA/PKC serine/threonine kinase family, functions downstream from phosphatidylinositol 3'-kinase (PI3K) in mediating effects of insulin on glucose transport and glycogen synthesis. We asked whether PKB/Akt mediates sequence-specific effects of insulin on hepatic gene expression using the model of the insulin-like growth factor binding protein-1 (IGFBP-1) promoter. Insulin lowers IGFBP-1 mRNA levels, inhibits IGFBP-1 promoter activity, and activates PKB/Akt in HepG2 hepatoma cells through a PI3K-dependent, rapamycin-insensitive mechanism. Constitutively active PI3K and PKB/Akt are each sufficient to mediate effects of insulin on the IGFBP-1 promoter in a nonadditive fashion. Dominant negative K179 PKB/Akt disrupts the ability of insulin and PI3K to activate PKB/Akt and to inhibit promoter activity. The IGFBP-1 promoter contains two IRSs each of which is sufficient to mediate sequence-specific effects of insulin, PI3K, and PKB/Akt on promoter activity. Highly related IRSs from the phosphoenolpyruvate carboxykinase and apolipoprotein CIII genes also are effective in this setting. These results indicate that PKB/Akt functions downstream from PI3K in mediating sequence-specific effects of insulin on the expression of IGFBP-1 and perhaps multiple hepatic genes through a conserved IRS.     

Functional Relationships of Resistance in Wide Flood Plains with Rigid Unsubmerged Vegetation

The effect of rigid, unsubmerged vegetation on flow resistance in wide flood plains was examined in this study. A series of experiments was run using rigid rods inserted into the flow field of a wide shallow flume. Several configurations of rod diameters with various lateral and longitudinal spacing were tested over a range of discharge values. Head losses across the rods were measured and a resistance-to-momentum-absorbing area concept was employed to relate density parameters to the resistance coefficient. The effects of flow depth, velocity, rod diameter (d), lateral spacing (r), and longitudinal spacing (l) were estimated. The results demonstrated that flow resistance is greatly impacted by both depth and velocity but that the effects are opposite in sign. The friction factor increased in only a slightly nonlinear fashion with depth, but it decreased in a highly nonlinear manner with increasing velocity, and the velocity effects were very sensitive to vegetation density parameters. Of the density parameters tested, the effects of diameter and lateral spacing were far more significant than are those of longitudinal spacing. The results also demonstrated that the effects of all parameters (density and depth) could be effectively combined into one relative density ratio (total vegetation stomatal area/bed cross sectional area) that was linearly related to the Darcy f and the Manning n.