Noncoherent detection scheme for GSM system

A receiver employing frequency discriminator demodulation and maximum likelihood sequence estimator detection is proposed for the GSM mobile telephone system. Computer simulated bit error rates based on two ray and GSM propagation models are presented. The proposed scheme is more tolerant to carrier frequency offset than a coherent system     

Study of Desorption and Adsorption During Grain Aeration

One requirement in designing and operating and operating system is to minimize the moisture change in stored grain. Moisture transfer during the aeration process is generally believed to be caused by the partial pressure difference between water in grain and water in air (P₃-P₄). A mathematical model was developed for rough rice, which predicts the partial pressure difference under various grain and ambient conditions. Observations of moisture change over 10 aeration tests confirmed the good correlation between sorption phenomena and partial pressure differences. Studies indicated that air relative humidity, air temperature, grain temperature and grain moisture are significant factors influencing the partial pressure differences and, thus, affecting     

Differential activity of the G protein beta5 gamma2 subunit at receptors and effectors

The G protein beta5 subunit differs substantially in amino acid sequence from the other known beta subunits suggesting that beta gamma dimers containing this protein may play specialized roles in cell signaling. To examine the functional properties of the beta5 subunit, recombinant beta5 gamma2 dimers were purified from baculovirus-infected Sf9 insect cells using a strategy based on two affinity tags (hexahistidine and FLAG) engineered into the N terminus of the gamma2 subunit (gamma2HF). The function of the pure beta5 gamma2HF dimers was examined in three assays: activation of pure phospholipase C-beta in lipid vesicles; activation of recombinant, type II adenylyl cyclase expressed in Sf9 cell membranes; and coupling of alpha subunits to the endothelin B (ETB) and M1 muscarinic receptors. In each case, the efficacy of the beta5 gamma2HF dimer was compared with that of the beta1 gamma2HF dimer, which has demonstrated activity in these assays. The beta5 gamma2HF dimer activated phospholipase C-beta with a potency and efficacy similar to that of beta1 gamma2 or beta1 gamma2HF; however, it was markedly less effective than the beta1 gamma2HF or beta1 gamma2 dimer in its ability to activate type II adenylyl cyclase (EC50 of approximately 700 nM versus 25 nM). Both the beta5 gamma2HF and the beta1 gamma2HF dimers supported coupling of M1 muscarinic receptors to the Gq alpha subunit. The ETB receptor coupled effectively to both the Gi and Gq alpha subunits in the presence of the beta1 gamma2HF dimer. In contrast, the beta5 gamma2HF dimer only supported coupling of the Gq alpha subunits to the ETB receptor and did not support coupling of the Gi alpha subunit. These results suggest that the beta5 gamma2HF dimer binds selectively to Gq alpha subunits and does not activate the same set of effectors as dimers containing the beta1 subunit. Overall, the data support a specialized role for the beta5 subunit in cell signaling.     

Preliminary studies using hybrid mediated electrochemical oxidation (HMEO) for the removal of persistent organic pollutants (POPs).

This study investigates the hybrid mediated electrochemical oxidation (HMEO) technology, which is a newly developed non thermal electrochemical oxidation process for organic destruction. A combination of ozone and ultrasonication processes to the mediated electrochemical oxidation (MEO) process is termed as hybrid mediated electrochemical oxidation. The electrochemical cell was developed in this laboratory. In the present study, several organic compounds, such as phenol, benzoquinone and ethylenediaminetetraacetic acid (EDTA), were chosen as the model organic pollutants to be destructed by the hybrid process. The organic destruction was monitored based on the CO2 generation and total organic carbon (TOC) reduction. The HMEO process was found to be extremely effective in the destruction of all the target organics chosen in this study. The information obtained from this study will provide an insight in adopting this technique for dealing with more recalcitrant organics (POPs).     

Factors affecting the activity of anammox bacteria during start up in the continuous culture reactor.

Factors affecting cultivation of extremely slow-growing bacteria (anaerobic ammonium oxidiser, doubling time 11 days) were investigated by using upflow anaerobic sludge blanket (UASB) reactors which can maintain high solid retention time. The effects of concentrations of DO, free ammonia (FA), and nitrite on activation of anammox activity were tested during the start-up period. The reactor was inoculated with granular sludge collected from a full-scale UASB reactor used for treating brewery wastewater, and sludge from a piggery wastewater treatment plant and rotating biological contactor treating sewage. Results of continuous operation showed that concentrations of DO, free ammonia (FA) and nitrite in the reactors played a key role in stimulating the anammox activity during start-up period. It is crucial to keep DO below 0.2 ppm, FA below 2 mg/L and nitrite nitrogen below 35 mg/L to cultivate anammox cells in the continuous bioreactor. When the levels of DO, FA and nitrite in the influent were controlled at less than the inhibition levels, the anammox activity increased gradually in the anaerobic condition. Addition of hydrogen sulphide into the reactor enhanced anammox activity in the continuous culture. Through the SEM, TEM and FISH analysis, anammox bacteria were detected in the granular sludge after 3 months of continuous operation.     

On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

Model concrete beam-column joints subjected to cyclic loading at two rates

Small-scale models of reinforced concrete beam-column joint were subjected to large cyclic displacements at two rates: 2.5×10⁻³ and 1.0 Hz. To assess damage, free-vibration tests were conducted. The reliability of the modelling techniques was established by comparison of the results for the slower rate with those obtained from the full-scale tests on prototype. The higher rate of loading caused a greater damage than that at the lower rate. This was evidenced by the measurements of the energy absorbed in the hysteresis loops, equivalent damping, and the stiffness and damping obtained from the free-vibration test. The relatively greater extent of damage appears to result from the different bond behaviour at different rates of loading.     

Damaged layer characteristics in micro-endmilling of copper using an ultrahigh-speed air spindle

This paper presents an investigation on the characteristics of damaged layer in micro-machining by using the ultrahigh-speed air spindle. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. In this study, micro-cutting force, surface roughness, and plastic deformation layer according to the variation of machining conditions were investigated by experiments. The damaged layer was measured using optical microscope for the samples prepared by metallographic techniques. Its scale was dependent on cutting process parameters, especially feed per tooth. According to experimental results, it was verified that the thickness of damaged layer was increased with increasing of feed per tooth and cutting depth, also thickness of damaged layer was reduced in down-milling compared to upmilling during micro-endmilling operation.     

A reliability model for a k-out-of-N:G redundant system with multiple failure modes and common cause failures

The paper presents a reliability model of a k-out-of-N:G redundant system with M mutually exclusive failure modes and common cause failures. Failed system repair times are arbitrarily distributed. The system is in a failed state when (N−k+1) units failed or a common cause failure occurred. Laplace transforms of the state probabilities and the availability of the system are derived. Finally, the system steady-state availability is also reported.