The effect of adding enzyme‐modified cheese on sensory and texture properties of low‐ and high‐fat cream cheeses

The influence of enzyme‐modified cheese (EMC) and fat content on sensory and texture properties of cream cheese was investigated. Enzyme‐modified cheese and fat content were set at three levels each, and organoleptic and texture properties for all experimental cheeses were then determined. Data were analysed using response surface methodology. Both design parameters had significant influence on sensory and texture properties. The EMC did not alter hardness significantly, whereas the higher fat formula had the higher hardness. The results indicated that the optimum level of EMC was less than 1% for high‐fat cream cheeses and at least 5% for low‐fat cream cheeses.     

Synthesis and optical characterization of copper nanoparticles prepared by laser ablation

The remarkable size-tunable properties of nanoparticles (NPs) make them a hot research topic with applications in a wide range of fields. Hence, copper (Cu) colloidal NPs were prepared using laser ablation (Nd:YAG, 1064 nm, 7 ns, 10 Hz, 6000 pulses) of a copper metal plate at different laser fluences (LFs) in the range of 1–2.5 J cm^?2 in ethylene glycol (EG), at room temperature. Analysis of NPs was carried using different independent techniques such as ultraviolet–visible (UV–vis) spectroscopy; transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. TEM analysis showed that the NPs were spherical with a bimodal distribution and an average particle size of 5 and 16 nm influence of 1.2 J cms^?2, and 9 and 22 nm at 2 J cm^?2. The UV–vis spectra of colloidal NPs revealed the maximum absorbance at around 584 nm, indicating the formation of Cu NPs, which supported using FTIR spectra. Furthermore, the absorption spectra confirmed the metallic nature of Cu NPs. FTIR spectroscopy was utilized to verify information about the NPs surface state and chemical bonds constructed in the atom groups apparent on their surface.     

A fully integrated high IP1dB CMOS SPDT switch using stacked transistors for 2.4 GHz TDD transceiver applications

A transmit/receive (T/R) switch is an essential module of every modern time division duplex (TDD) transceiver circuit. A T/R switch with high power handling capacity in CMOS process is difficult to design due to capacitive coupling of radio frequency signals to the substrate. This paper proposes a single-pole-double-throw (SPDT) T/R switch designed in a standard Silterra 130 nm CMOS process for high-power applications like RFID readers. The results reveal that, in 2.4 GHz ISM band, the proposed switch exhibits a very high input P1dB of 39 dBm with insertion loss of only 0.34 dB and isolation of 40 dB in transmit mode but 1.08 dB insertion loss and 30 dB isolation in receive mode. Stacked thick-oxide triple-well transistors, resistive body floating and negative control voltages are used to achieve such lucrative performance. Moreover, the chip size of the designed switch is only 0.034 mm² as bulky inductors and capacitors are avoided. The Monte-Carlo and corner analyses confirm that the performance of the switch is also quite stable and reliable.     

Third‐harmonic generation imaging of breast tissue biopsies

We demonstrate for the first time the imaging of unstained breast tissue biopsies using third‐harmonic generation (THG) microscopy. As a label‐free imaging technique, THG microscopy is compared to phase contrast and polarized light microscopy which are standard imaging methods for breast tissues. A simple feature detection algorithm is applied to detect tumour‐associated lymphocyte rich regions in unstained breast biopsy tissue and compared with corresponding regions identified by a pathologist from bright‐field images of hematoxylin and eosin stained breast tissue. Our results suggest that THG imaging holds potential as a complementary technique for analysing breast tissue biopsies.     

Phototransients in 30 mol% CdO-70 mol% P2O5 glass

Phototransients produced when radiation of wavelength 240 nm is switched on have been studied in (30 mol% CdO-70 mol% P²O⁵ glass at various applied voltages. The phototransients show a linear rise with field, while their decay time (time taken by the photocurrent to attain its steady value) tends to saturate at higher fields. For shorter times ΔIα exp (? t/r), while for longer times there is a departure from the exponential behaviour. These phototransients may be due to trapping of photo-excited charges by ionized donors and space charge effects.     

Research note Variation of band gap with temperature in cadmium phosphate glass

The spectral response of photoconductivity of 50 mol.% CdO-50 mol. % P₂O₅ glass has been measured under different applied fields in the photon energy range l·5–6·2eV at temperatures ranging from 192 K to 310 K. A numerical technique has been employed to analyse the data. The band gap obtained has been found to be independent of the applied field and the field average of the band gap shows a slow decrease with the increase in temperature.