Spatial memory deficits following stimulation of hippocampal 5-HT1B receptors in the rat

The authors review the principles of reconstructive surgery for lower limb salvage after severe lower limb trauma to determine factors that have been used as decision-making criteria for limb salvage or amputation in severe lower extremity injuries and the methods of reconstruction and their outcome. The use of scoring systems and their value in acute decision making (primary amputation or limb salvage) are described. Soft-tissue reconstructive techniques, with emphasis on the use of flaps and the importance of selecting the best technique and time for the reconstruction are reviewed. Skeletal reconstructive techniques are described, including available options and currently held views on indications and use of the best contemporary methods. It is essential for the physician to make a good initial decision on the need for primary amputation or limb salvage. A multidisciplinary approach is fundamental to successful salvage.     

Simple ASK transmitter using a 790 nm self-pulsating laser diodefor local area networks

A simple amplitude shift keying (ASK) optical link is demonstrated by using a low-cost self-pulsating laser diode and an envelope detector for a low-cost broadband local area network. A link sensitivity of -22 dBm was achieved at 200 Mbit/s. Because the self-pulsation frequency can be tuned by the bias current, frequency division multiplexing can be simply implemented for multiuser applications     

氧化锌压敏陶瓷烧结致密化过程的研究

本文研究了氧化锌压敏陶瓷的致密化过程，结果发现只有当烧结温度升高到一定值时，试样中的ＺｎＯ粉粒产生聚集，致密化过程才开始．致密化是瓷体获得稳定电性能的基础．低熔点添加剂Ｂ２Ｏ３可以降低致密化的起始温度，而致密化过程中的等温烧结对ＺｎＯ压敏陶瓷的最大密度几乎没有影响．     

Locally optimum rank detection of correlated random signals inadditive noise

Nonparametric detection of a zero-mean random signal in additive noise is considered. The locally optimum detector based on signs and ranks of observations is derived, for good weak-signal detection performance under any specified noise probability density function. This detector is shown to have interesting similarities to the locally optimum detector for random signals. It may also be viewed as a generalization of the locally optimum rank detector for known signals. Examples of the test statistic of the detector are given for some specific noise probability density functions. Asymptotic and finite sample-size performance of the locally optimum rank detector is also considered     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.     

汽油辛烷值智能调合系统

采取一种能够在线学习、不断提高、建立一系列模型的策略，提出了一种具有学习功能的汽油辛烷值智能调合系统。该系统可以根据成品汽油辛烷值指标、生产成本和市场价格等因素提供一个较好的油品调合调度方案。实际应用结果表明，利用参数学习的方法计算调合汽油辛烷值是可行的。     

基于ASP.NET的校园网上商店的研究与实现

本文分析了校园网上商店建设的背景,提出了建设校园网上商店的必要性。运用ASP.net技术,提出了校园网上商店的商业模式分析、体系结构、平台设计方案和实现方法。     

Application of model predictive control strategy based on fuzzy identification to an SP-100 space reactor

In this work, a model predictive control method combined with fuzzy identification, is applied to the design of the thermoelectric (TE) power control in the SP-100 space reactor. The future TE power is predicted by using the fuzzy model identified by a subtractive clustering method of a fast and robust algorithm. The objectives of the proposed fuzzy model predictive controller are to minimize both the difference between the predicted TE power and the desired power, and the variation of control drum angle that adjusts the control reactivity. Also, the objectives are subject to maximum and minimum control drum angle and maximum drum angle variation speed. The genetic algorithm that is effective in accomplishing multiple objectives is used to optimize the fuzzy model predictive controller. A lumped parameter simulation model of the SP-100 nuclear space reactor is used to verify the proposed controller. The results of numerical simulations to check the performance of the proposed controller show that the TE generator power level controlled by the proposed controller could track the target power level effectively, satisfying all control constraints.     

云龙水库大坝表面变形观测资料分析

1工程概况云龙水库是昆明市掌鸠河引水供水工程的水源工程,位于昆明市西北部禄劝县的云龙乡岔河村附近,距昆明市区约86km。大坝坝址选在金沙江水系二级支流掌鸠河上游峡谷河段内,初期规模正常蓄水位2087.97m,校核洪水位2091.98m;终期规模水库正常蓄水位2089.67m,设计洪水位2092.59m,校核洪水位2093.58m。初期规模总库容4.48亿m3,终期规模总库容4.84亿m3,属大(2)型水库工程,工程等别为Ⅱ。水库枢纽建筑物由大坝,泄洪、导流隧洞,引水隧洞,溢洪道等组成。除溢洪道按初期规模兴建外,其余枢纽建筑物均按终期规模兴建。泄洪、导流和引水建筑物布置…