Context-dependent software solutions to handle video synchronization and delay in collaborative live mobile video production

The advent of modern mobile phones, 3G networks, and live video streaming has made it possible to broadcast live video from mobile devices. This is now giving rise to a new class of applications which enable mobile collaborative live video production, in which groups of amateurs work together to provide a rich broadcast of events. We focus on new and expected synchronization problems that arise in these more complex systems when broadcasting live events because of the delays that often occur in streaming over internet and mobile networks. The problem has been investigated by acquiring initial user feedback, as well as conducting technical delay measurements of two examples of such systems and relating them to existing literature. We identified two types of technical problems which affect the mixing of the streams, namely the difference in delay in multiple streams, a.k.a. asynchrony among streams, and the delay between the event itself and its presentation in the mixer. These problems affect the mixing in various ways depending on whether or not the director has visual access to the unmediated event. This knowledge has then been used to inform the conceptualization of identifiable ways of handling delays and synchronization. We suggest the introduction of a software feature providing context-dependent delay, in which these requirements can be balanced differently to fit specific contexts of use. We specifically address the different types of mixing which occurs when the director, or mixer, only has access to the topic through the mobile media (“out of view”), as well as mixing in a context in which the topic also is physically present (“in-view”) in front of the mixer.     

Insecticidal Effects of Organotin(IV) Compounds on Plutella Xylostella (L.) Larvae. II. Inhibitory Potencies Against Acetylcholinesterase and Evidence for Synergism in Tests With Bacillus Thuringiensis(BER.) and Malathion

Features of pesticide synergism and acetylcholinesterase (AChE) inhibition (in vitro) were studied using a selected range of organotin compounds against the early 4th instar larvae of a highly resistant strain of the diamondback moth (DBM), Plutella xylostella, a major universal pest of cruciferous vegetables.Fourteen triorganotin compounds were evaluated for their ability to enhance the toxicity of the microbial insecticide, Bacillus thuringiensis (BT) and of the commercial insecticide, Malathion to Plutella xylostella larvae. Supplemental synergism was observed with triphenyl- and tricyclopentyltin hydroxides in combinations with Bacillus thuringiensis. Increased synergism was observed with an increase in the number of cyclopentyl groups on tin in the mixed series, Cyp(n) Ph(3-n) SnX, where X = OH, and 1-(1,2,4-triazolyl). The combination of (p-chlorophenyl)diphenyltin N,N-dimethyldithiocarbamate at LD(10) and LD(25) concentrations with sublethal concentrations of Malathion as well as of tricyclohexyltin methanesulphonate at the 0.01% (w/v) concentration with Malathion exerted strong synergistic effects (supplemental synergism) with toxicity index (T.I) values of 7.2, 19.8 and 10.1, respectively.Studies on the in vitro inhibition of acetylcholinesterase prepared from the DBM larvae showed that while most of the triorganotin Compounds tested were without effect on the enzyme, compounds containing the thiocarbamylacetate or the dithiocarbamylacetate moieties demonstrated appreciable levels of inhibition, being comparable in efficacy to commercial grades of Malathion and Methomyl.     

Effect of Composition on the Electromechanical Properties of (1-x)Pb(Mg1/3Nb2/3)O3−XPbTiO3 Ceramics

Ceramic lead magnesium niobate–lead titanate ((1-x)PMN_-xPT) of different compositions has been prepared by the columbite precursor method. This study discusses compositions ranging from 0.94PMN–0.06PT to 0.60PM–N0.40PT, focusing on two areas of the (1-x)PMN_xPT system: compositions that exhibit electrostrictive behavior, and those that show piezoelectric behavior. In electrostrictive compositions where x is in the range of 0.06–0.20, the dielectric constant and electromechanical coupling factor dependencies on the bias field are evaluated. The optimal electromechanical properties are obtained with the composition 0.82PMN–0.18PT, measured at temperature T = T_m (the temperature of maximum dielectric constant) = 80°C and with a dc bias of 5 kV/cm. X–ray diffractometry is used to show that the (1-x)PMN_-xPT system has a compositionally wide two–phase region and that 0.655PMN–0.345PT is the morphotropic phase boundary (MPB) composition. Electromechanical property evaluation shows that the optimal piezoelectric properties (piezoelectric charge coefficient ( d₃₃ ) value of 720 pC/N, dielectric constant ( K ) value of 5400, and electromechanical planar and thickness coupling coefficient ( k_p and k_t , respectively) values of 62% and 46%, respectively) are obtained at the MPB composition.     

Abutilon indicum Seed Oil — Characterisation of HBr-Reactive Acids

The seed oil of Abutilon indicum (Malvaceae) contains three HBr-reactive fatty acids. These are shown to be cis-12,13-epoxyoleic (vernolic) acid, 1.6% 9,10-methylene-octadec-9-enoic (sterculic) acid, 0.9%; as well as 8,9-methylene-heptadec-8-enoic (malvalic) acid, 2.3%. Quantitative results are obtained by combining informations about the HBr-titration, the preparative thin layer separation of oxygenated and non-oxygenated acids, and gas liquid chromatographic analysis.     

Dishwashing performance of mixed palm stearin sulfonated methyl esters and polyoxyethylene sorbitan esters

The detergency profiles of sodium salt α-sulfonated methyl esters derived from palm stearin (α-SMEPS) and polyoxyethylene (20) sorbitan monoesters (POESE) in mixed micelle systems were evaluated as a function of the weight ratios of α-SMEPS/POESE [polyoxyethylene (20) sorbitan monolaurate (12), polyoxyethylene (20) sorbitan monostearate (18∶0), and polyoxyethylene (20) sorbitan monooleate (18∶1)] at different water hardness values (5.12, 51.2, and 512.0 ppm CaCO₃) and temperatures (20, 30, 45, and 65°C), respectively. All the mixtures of α-SMEPS/POESE (12, 18∶0, and 18∶1) systems exhibited a synergistic effect at 65°C in the absence of hardness. This was evaluated by measuring the percentage of soil removed. The systems showed an increase in detergency with both the temperature and water hardness. Maximal detergency was observed with 5.12 ppm CaCO₃ in the mixed surfactant solution.     

Synthesis and Characterization of Nano-Composite Alumina–Titania Ceramic Membrane for Gas Separation

A ceramic composite membrane was prepared using a commercial titania ceramic membrane coated by alumina oxide via a sol–gel technique where polyvinyl alcohol (PVA) was used as a binder. The characteristic of the membrane was analyzed in terms of the effect of PVA concentration and sintering temperature on viscosity, pore size, density, porosity and surface area of the membrane. Two vol% of PVA solution containing 4 g of PVA in 100 mL of water was adequate to achieve an appropriate porosity level to avoid cracks on the gel layer. Sol viscosity and pore size of the membrane essentially increased when the PVA concentration was increased. The density of the membrane increased as the sintering temperature increased. The porosity level however, decreased when the temperature was increased. The composite membrane was further characterized in terms of permeability of pure gas at low-temperature region (301 K) where an experimental platform has been developed to perform the permeability studies.     

Rigid Polyurethane Foam Production from Palm Oil-Based Epoxidized Diethanolamides

A new type of rigid polyurethane foam was produced by incorporating oxazolidone heterocyclic rings on to polyurethane backbones. Epoxidized diethanolamides were synthesized by reacting palm oil blends of epoxidized palm olein and refined bleached deodorized palm kernel olein with diethanolamine to produce rigid polyurethane foams. Epoxides, retained in the diethanolamides, reacted with isocyanate during foam production in the presence of AlCl₃–THF complex catalyst to form oxazolidone linkages in the polyurethane network. The carbonyl stretch of oxazolidone was identified at 1,750 cm⁻¹ through Fourier Transform Infra Red analysis. Chemical modifications of the polyurethane network also improved the thermal and mechanical properties of the foams. In addition, isocyanate index 1.4 was determined to be the most suitable in the production of foams from this newly synthesized epoxidized diethanolamides.     

Augmented grasshopper optimization algorithm by differential evolution: a power scheduling application in smart homes

With the increasing number of electricity consumers, production, distribution, and consumption problems of produced energy have appeared. This paper proposed an optimization method to reduce the peak demand using smart grid capabilities. In the proposed method, a hybrid Grasshopper Optimization Algorithm (GOA) with the self-adaptive Differential Evolution (DE) is used, called HGOA. The proposed method takes advantage of the global and local search strategies from Differential Evolution and Grasshopper Optimization Algorithm. Experimental results are applied in two scenarios; the first scenario has universal inputs and several appliances. The second scenario has an expanded number of appliances. The results showed that the proposed method (HGOA) got better power scheduling arrangements and better performance than other comparative algorithms using the classical benchmark functions. Moreover, according to the computational time, it runs in constant execution time as the population is increased. The proposed method got 0.26?% enhancement compared to the other methods. Finally, we found that the proposed HGOA always got better results than the original method in the worst cases and the best cases.

     

Enhanced halftone-based secure and improved visual cryptography scheme for colour/binary Images

Visual Cryptography (VC) is gaining attraction during the past few years to secure the visual information in the transmission network. It enables the visual data i.e. handwritten notes, photos, printed text, etc. to encrypt in such a way that their decryption can be done through the human visual framework. Hence, no computational assistance is required for the decryption of the secret images they can be seen through naked eye. In this paper, a novel enhanced halftoning-based VC scheme is proposed that works for both binary and color images. Fake share is generated by the combination of random black and white pixels. The proposed algorithm consists of 3 stages i.e., detection, encryption, and decryption. Halftoning, Encryption, (2, 2) visual cryptography and the novel idea of fake share, make it even more secure and improved. As a result, it facilitates the original restored image to the authentic user, however, the one who enters the wrong password gets the combination of fake share with any real share. Both colored and black images can be processed with minimal capacity using the proposed scheme.

     

A novel secure solution of using mixed reality in data transmission for bowel and jaw surgical telepresence: enhanced rivest cipher RC6 block cipher

Security threats are crucial challenges that deter Mixed reality (MR) communication in medical telepresence. This research aims to improve the security by reducing the chances of types of various attacks occurring during the real-time data transmission in surgical telepresence as well as reduce the time of the cryptographic algorithm and keep the quality of the media used. The proposed model consists of an enhanced RC6 algorithm in combination. Dynamic keys are generated from the RC6 algorithm mixed with RC4 to create dynamic S-box and permutation table, preventing various known attacks during the real-time data transmission. For every next session, a new key is created, avoiding possible reuse of the same key from the attacker. The results obtained from our proposed system are showing better performance compared to the state of art. The resistance to the tested attacks is measured throughout the entropy, Pick to Signal Noise Ratio (PSNR) is decreased for the encrypted image than the state of art, structural similarity index (SSIM) closer to zero. The execution time of the algorithm is decreased for an average of 20%. The proposed system is focusing on preventing the brute force attack occurred during the surgical telepresence data transmission. The paper proposes a framework that enhances the security related to data transmission during surgeries with acceptable performance.