Call admission control schemes: a review

Over the last few years, a substantial number of call admission control (CAC) schemes have been proposed for ATM networks. We review the salient features of some of these algorithms. Also, we quantitatively compare the performance of three of these schemes     

Bayes and classical estimation of environmental factors for thebinomial distribution

An environmental factor converts reliability test results at one environmental condition into equivalent “failure” information at other environments. This paper studies environmental-factor estimation for the binomial distribution. Under general conditions, Bayes point estimates and credibility limits for environmental factors are derived. Classical point and confidence interval estimates are introduced and compared with the Bayes estimators. The characteristics of Bayes and classical estimators for the binomial distribution are summarized through numerical computation and theoretical analysis. A numerical example of reliability assessment by means of environmental factors is presented     

An efficient electromagnetic-physics-based numerical technique for modeling and optimization of high-frequency multifinger transistors

We present a fast wavelet-based time-domain modeling technique to study the effect of electromagnetic (EM)-wave propagation on the performance of high-power and high-frequency multifinger transistors. The proposed approach solves the active device model that combines the transport physics, and Maxwell's equations on nonuniform self-adaptive grids, obtained by applying wavelet transforms followed by hard thresholding. This allows forming fine and coarse grids in the locations where variable solutions change rapidly and slowly, respectively. A CPU time reduction of 75% is achieved compared to a uniform-grid case, while maintaining the same degree of accuracy. After validation, the potential of the developed technique is demonstrated by EM-physical modeling of multifinger transistors. Different numerical examples are presented, showing that accurate modeling of high-frequency devices should incorporate the effect of EM-wave propagation and electron-wave interactions within and around the device. Moreover, high-frequency advantages of multifinger transistors over single-finger transistors are underlined through numerical examples. To our knowledge, this is the first time in the literature a fully numerical EM-physics-based simulator for accurate modeling of high-frequency multifinger transistors is introduced and implemented.     

Robust weighted likelihood estimation of exponential parameters

The problem of estimating the parameter of an exponential distribution when a proportion of the observations are outliers is quite important to reliability applications. The method of weighted likelihood is applied to this problem, and a robust estimator of the exponential parameter is proposed. Interestingly, the proposed estimator is an /spl alpha/-trimmed mean type estimator. The large-sample robustness properties of the new estimator are examined. Further, a Monte Carlo simulation study is conducted showing that the proposed estimator is, under a wide range of contaminated exponential models, more efficient than the usual maximum likelihood estimator in the sense of having a smaller risk, a measure combining bias & variability. An application of the method to a data set on the failure times of throttles is presented.     

Effects of forage level and canola seed supplementation on site and extent of digestion of organic matter, carbohydrates, and energy by steers

The objective of this study was to determine the effects of fat supplementation from canola seed (CS) on ruminal fermentation and postruminal digestion of OM, carbohydrates, and energy of diets containing different levels of forage. Six ruminally and duodenally cannulated beef steers (354 kg +/- 18) were given ad libitum access to six isonitrogenous diets that were offered twice daily in a 6 x 6 Latin square design. Treatments were arranged as a 2 x 3 factorial with two forage levels (70 vs 30% of dietary DM as corn silage) and three forms of CS supplementation including no CS or CS added at 10% of dietary DM as whole CS treated with alkaline hydrogen peroxide or untreated crushed CS. Fat from CS provided 5% of dietary DM. The remaining dietary ingredients were corn, canola meal, molasses, and urea. No interactions (P > .05) between dietary forage level and CS supplementation were observed for ruminal characteristics or digestion of OM, carbohydrates, and energy in the rumen, postruminally, or in the total tract. Fat supplementation from CS did not affect (P > .05) DMI. With few exceptions, fat supplementation did not affect (P > .05) ruminal, postruminal, or total tract digestibilities of OM, structural and nonstructural carbohydrates, and GE. Ruminal disappearance of GE was decreased (P < .05) when diets were supplemented with fat from whole treated CS, and total tract digestibilities of OM and GE were decreased (P < .05) when diets were supplemented with fat from CS in either form. Ruminal pH, concentrations of NH3 N and total VFA, and molar proportions of acetate, propionate, and butyrate were not affected (P > .05) by fat supplementation. Results suggest that fat supplementation from CS (at 5% of dietary DM) as whole treated or untreated crushed had no negative effects on ruminal fermentation of OM, carbohydrates, or energy when steers were given ad libitum access to diets containing high or low forage.     

The Berlekamp-Massey Algorithm revisited

We propose a slight modification of the Berlekamp-Massey Algorithm for obtaining the minimal polynomial of a given linearly recurrent sequence. Such a modification enables to explain it in a simpler way and to adapt it to lazy evaluation. partially supported by the Galois Theory and Explicit Methods in Arithmetic Project HPRN-CT-2000-00114 partially supported by the European Union funded project RAAG CT-2001-00271     

Simulation of Facial Muscle Actions Based on Rational Free Form Deformations

This paper describes interactive facilities for simulating abstract muscle actions using Rational Free Form Deformations (RFFD). The particular muscle action is simulated as the displacement of the control points of the control-unit for an RFFD defined on a region of interest. One or several simulated muscle actions constitute a Minimum Perceptible Action (MPA), which is defined as the atomic action unit, similar to Action Unit (AU) of the Facial Action Coding System (FACS), to build an expression.     

Metallurgical parameters,mechanical properties and machinability of ductile cast iron

Results on the effect of solidification cooling rate on the microstructure, mechanical properties and machinability of spheroidal graphite (SG) iron have been presented. The effect of ferritic heat treatment on the same properties has been also investigated. The microstructural observation, tensile properties and hardness values of the present SG iron has been developed. The tool life criterion was used as a measure of machinability. It was found that during turning of SG iron by using a single point cutting tool, its life increased with decreasing the solidification cooling rate for both sand and metal moulds. The tool life was found to be significantly affected by the variation of nodule characteristics. A decrease in tool life due to an increase of nodule count was observed. The tool life was found to be directly proportional to the ductility of SG iron whether for the as cast or ferritic heat-treated ingots.     

A simple footskate removal method for virtual reality applications

Footskate is a common problem encountered in interactive applications dealing with virtual character animations. It has proven difficult to fix without the use of complex numerical methods, which require expert skills for their implementations, along with a fair amount of user interaction to correct a motion. On the other hand, deformable bodies are being increasingly used in virtual reality (VR) applications, allowing users to customize their avatar as they wish. This introduces the need of adapting motions without any help from a designer, as a random user seldom has the skills required to drive the existing algorithms towards the right solution. In this paper, we present a simple method to remove footskate artifacts in VR applications. Unlike previous algorithms, our approach does not rely on the skeletal animation to perform the correction but rather on the skin. This ensures that the final foot planting really matches the virtual character’s motion. The changes are applied to the root joint of the skeleton only so that the resulting animation is as close as possible to the original one. Eventually, thanks to the simplicity of its formulation, it can be quickly and easily added to existing frameworks.