Throughput-Oriented NoC Topology Generation and Analysis for High Performance SoCs

This paper presents a new approach to the design and analysis of NoC topologies which is based on the transaction-oriented communication methods of on-chip components. We propose two algorithms that attempt to meet the communication requirement of an on-chip application using a minimum number of network resources for the task, by generating application-specific topologies. In addition, to aid the design process of complex systems, the design method incorporates a form of predictive analysis which can estimate the degree of contention in a given system without performing detailed simulation. This predictive analysis method is used to determine the minimum frequency of operation for generated topologies, and is incorporated into the topology generation process. The proposed design method was tested using real-word applications, including an MPEG4 decoder and a multi-window display application. The generated topologies were found to offer similar or better performance when compared with regular topologies. However, the topologies generated by our method were more economical, using, on average, half the network resources of regular topologies.     

Direction of arrival estimation using adaptive directional time-frequency distributions

Time-frequency distributions (TFDs) allow direction of arrival (DOA) estimation algorithms to be used in scenarios when the total number of sources are more than the number of sensors. The performance of such time–frequency (t–f) based DOA estimation algorithms depends on the resolution of the underlying TFD as a higher resolution TFD leads to better separation of sources in the t–f domain. This paper presents a novel DOA estimation algorithm that uses the adaptive directional t–f distribution (ADTFD) for the analysis of close signal components. The ADTFD optimizes the direction of kernel at each point in the t–f domain to obtain a clear t–f representation, which is then exploited for DOA estimation. Moreover, the proposed methodology can also be applied for DOA estimation of sparse signals. Experimental results indicate that the proposed DOA algorithm based on the ADTFD outperforms other fixed and adaptive kernel based DOA algorithms.     

Finite-Impulse-Response Digital Differentiators for Midband Frequencies Based on Maximal Linearity Constraints

Maximally linear digital differentiators (DDs) are known for high accuracy in narrow frequency bands centered at the frequency for which they are designed. In this paper, designs of DDs of odd and even lengths having maximal linearity at the middle of the frequency band are presented. Applying the maximal linearity constraints to the magnitude response of a differentiator gives a system of linear equations, which can be solved for the impulse response coefficients of the differentiator. It is observed that the coefficient matrices of these equations are Vandermonde matrices, and this helps in finding the solution of the equations in closed form. Design examples are presented to show the accuracy of the presented designs, and it is observed that even-length designs are more accurate in a significantly wider frequency band as compared with odd-length designs     

Solution‐Processed Extremely Efficient Multicolor Perovskite Light‐Emitting Diodes Utilizing Doped Electron Transport Layer

A specially designed n‐type semiconductor consisting of Ca‐doped ZnO (CZO) nanoparticles is used as the electron transport layer (ETL) in high‐performance multicolor perovskite light‐emitting diodes (PeLEDs) fabricated using an all‐solution process. The band structure of the ZnO is tailored via Ca doping to create a cascade of conduction energy levels from the cathode to the perovskite. This energy band alignment significantly enhances conductivity and carrier mobility in the CZO ETL and enables controlled electron injection, giving rise to sub‐bandgap turn‐on voltages of 1.65 V for red emission, 1.8 V for yellow, and 2.2 V for green. The devices exhibit significantly improved luminance yields and external quantum efficiencies of, respectively, 19 cd A^?1 and 5.8% for red emission, 16 cd A^?1 and 4.2% for yellow, and 21 cd A^?1 and 6.2% for green. The power efficiencies of these multicolor devices demonstrated in this study, 30 lm W^?1 for green light‐emitting PeLED, 28 lm W^?1 for yellow, and 36 lm W^?1 for red are the highest to date reported. In addition, the perovskite layers are fabricated using a two‐step hot‐casting technique that affords highly continuous (>95% coverage) and pinhole‐free thin films. By virtue of the efficiency of the ETL and the uniformity of the perovskite film, high brightnesses of 10 100, 4200, and 16,060 cd m^?2 are demonstrated for red, yellow, and green PeLEDs, respectively. The strategy of using a tunable ETL in combination with a solution process pushes perovskite‐based materials a step closer to practical application in multicolor light‐emitting devices.     

Solid-State Synthesis and Thermoelectric Properties of Sb-Doped Mg2Si Materials

Sb-doped magnesium silicide compounds have been prepared through ball milling and solid-state reaction. Materials produced were near-stoichiometric. The structural modifications have been studied with powder x-ray diffraction. Highly dense pellets of Mg₂Si_1?x Sb _x (0 ≤ x ≤ 0.04) were fabricated via hot pressing and studied in terms of Seebeck coefficient, electrical and thermal conductivity, and free carrier concentration as a function of Sb concentration. Their thermoelectric performance in the high temperature range is presented, and the maximum value of the dimensionless figure of merit was found to be 0.46 at 810 K, for the Mg₂Si_0.915Sb_0.015 member.     

Determination of the average channel temperature of GaN MOSHFETs under continuous wave and periodic-pulsed RF operational conditions

We present a method to determine the average device channel temperature of AlGaN/GaN metal–oxide–semiconductor heterostructure field effect transistors (MOSHFETs) in the time domain under continuous wave (CW) and periodic-pulsed RF (radiation frequency) operational conditions. The temporal profiles of microwave output power densities of GaN MOSHFETs were measured at 2 GHz under such conditions and used for determination of the average channel temperature. The measurement technique in this work is also being utilized to determine the thermal time constant of the devices. Analytical temporal solutions of temperature profile in MOSHFETs are provided to support the method. The analytical solutions can also apply to generic field effect transistors (FETs) with an arbitrary form of time-dependent heat input at the top surface of the wafer. It is found that the average channel temperature of GaN MOSHFETs on a 300 μm sapphire substrate with the output power of 10 W/mm can be over 400 °C in the CW mode while the average channel temperature of GaN MOSHFETs on a SiC substrate with the same thickness only reaches 50 °C under the same condition. The highest average channel temperature in a pulsed RF mode will vary with respect to the duty cycle of the pulse and type of the substrate.     

Interaction of α radiation with iron-doped n-type silicon

Deep-level transient spectroscopy (DLTS) measurements were carried out on low-doped n-silicon before and after irradiation with 5.48 MeV α particles at room temperature with a fluence of 10¹⁰ α particles/cm². The DLTS measurements on the samples identified three electron levels E₁, E₂ and E₃ before irradiation. The deep-levels characteristic studies include emission rate signatures, activation energies, defect concentrations and capture cross sections. It was found that all pre-existing defects decreased their amplitudes during irradiation. The decrease in activation energy of level E₃ and noticeable suppression of level E₁ was also observed after irradiation. It was clearly seen that the composite peak E₃ (combination of E₂ and E₃) was successfully resolved after irradiating with α particles. α-irradiation is seen to lead a significant suppression of the iron interstitial defect, and without causing any change in its room temperature annealing characteristics.     

How Multirobot Systems Research will Accelerate our Understanding of Social Animal Behavior

Our understanding of social insect behavior has significantly influenced artificial intelligence (AI) and multirobot systems' research (e.g., ant algorithms and swarm robotics). In this work, however, we focus on the opposite question: "How can multirobot systems research contribute to the understanding of social animal behavior?" As we show, we are able to contribute at several levels. First, using algorithms that originated in the robotics community, we can track animals under observation to provide essential quantitative data for animal behavior research. Second, by developing and applying algorithms originating in speech recognition and computer vision, we can automatically label the behavior of animals under observation. In some cases the automatic labeling is more accurate and consistent than manual behavior identification. Our ultimate goal, however, is to automatically create, from observation, executable models of behavior. An executable model is a control program for an agent that can run in simulation (or on a robot). The representation for these executable models is drawn from research in multirobot systems programming. In this paper we present the algorithms we have developed for tracking, recognizing, and learning models of social animal behavior, details of their implementation, and quantitative experimental results using them to study social insects.     

Job search website for illiterate users of Pakistan

Illiteracy is a major hurdle in socio-economic development of Pakistan. Research in the Information and Communication Technology (ICT) can help in tackling this issue by developing solutions tailored for illiterate population. The work presented within this paper proposes a job search website for illiterate population of KPK province of Pakistan. The designed website does not require any human assistance while searching a job. Moreover, the website uses culturally relevant graphical and audio content. The usability of the website is tested according to the ISO-9241-11 specification. Furthermore, we have studied the effect of the participants’ characteristics, i.e., their age, computer and mobile usage experience on the usability of the website. The results show that the participants found the website usable. Specifically, they could search suitable jobs with a minimal number of clicks and in less time as compared to the usual task completion rates reported throughout the literature. None of the participants’ characteristics were found to be affecting the usability of the website. These results suggest a promising potential of ICT solutions for providing services to illiterate population of Pakistan.