Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Ontogeny of serotonergic neurons in Aplysia californica

Although the functions of serotonin in adult Aplysia have been the focus of numerous investigations, our understanding of the roles played by this neurotransmitter during development is very incomplete. In the previous study (Marois and Carew [1997a] J. Comp. Neurol. 386:477-490), we showed that identified serotonergic cells are present very early during the ontogeny of Aplysia. In order to gain insight into the possible functions that these serotonergic cells may exert, we have used immuno-electron microscopy in this study to examine the projection patterns and target tissues of the serotonergic cells during the larval development of Aplysia. The results indicate that the larval serotonergic cells have numerous and precise connections to non-neuronal and neuronal target tissues: Serotonergic cells innervate the ciliated cells of the velum, numerous muscle systems, possibly visceral organs, and several cells in the central nervous system. Repeated observations of one serotonergic contact onto an undifferentiated neuron in the abdominal ganglion over a short developmental time span suggest that the serotonergic input may trigger axonogenesis in the postsynaptic cell. Apart from this possibility, we suggest that the innervation patterns of the larval serotonergic cells essentially fulfill the same primary function attributed to the adult serotonergic cells, that of modulating ongoing physiological and behavioral activity.     

The implementation of TS MAC (transmitter station monitor, alarmand control) system for digital DBS system

The implementation of TS MAC system for KOREASAT DBS (direct broadcast satellite) system is presented. This TS MAC controls and monitors the status of the TS equipment and gathers the alarm for them. The advantage of this system is the center-concentrated, real time processing, remote control, and object oriented module decomposing     

Mechanomyography and oxygen consumption during incremental cycle ergometry

Brucella abortus strain RB51 was recently approved as an official brucellosis calfhood vaccine for cattle by the Animal and Plant Health Inspection Service branch of the United States Department of Agriculture. Currently available serologic surveillance tests for B. abortus do not detect seroconversion following SRB51 vaccination. The purpose of this study was to evaluate a dot-blot assay using gamma-irradiated strain RB51 bacteria for its specificity and sensitivity to detect antibody responses of cattle vaccinated with strain RB51. Dot-blot titers of sera at a recommended dosage (10(10) colony-forming units) were similar to those of sera from cattle vaccinated with similar numbers of B. abortus strain 19 and greater (P < 0.05) than titers of nonvaccinated cattle. In the first 12 weeks after vaccination with 10(10) colony-forming units of strain RB51, the RB51 dot-blot assay had 100% specificity for titers of 80 or less and a 53% sensitivity for titers of 160 or greater. Sensitivity of the RB51 dot-blot assay peaked at 4 weeks after vaccination with 10(10) colony-forming units of strain RB51. Dot-blot responses of sera from cattle vaccinated with a reduced dosage of strain RB51 (10(9) colony-forming units) did not differ (P > 0.05) from titers of sera from nonvaccinated cattle. Following intraconjunctival challenge with B. abortus strain 2308, titers on the RB51 dot-blot assay did not differ (P > 0.05) between nonvaccinated cattle and cattle vaccinated at calfhood with strain 19 or strain RB51.     

Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers

Microllular plastics are cellular polymers characterized by cell densities greater than 10⁹ cells/cm³ and cells smaller than 10 μm. One of the critical steps in the continuous production of microcellular plastics is the promotion of high cell nucleation rates in a flowing polymer matrix. These high nucleation rates can be achieved by first forming a polymer/gas solution followed by rapidly decreasing the solubility of gas in the polymer. Since, in the processing range of interest, the gas solubility in the polymer decreases as the pressure decreases, a rapid pressure drop element, consisting of a nozzle, has been employed as a continuous microcellular nucleation device. In this paper, the effects of the pressure drop rate on the nucleation of cells and the cell density are discussed. The experimental results indicate that both the magnitude and the cell density are discussed. The experimental results indicate that both the magnitude and the rate of pressure drop play a strong role in microcellular processing. The pressure phenomenon affects the thermodynamic instability induced in the polymer/gas solution and the competition between cell nucleation and growth.     

Characterization of the cavity nucleation factor for life prediction under creep-fatigue interaction

It is understood that grain boundary cavitation is one of the detrimental processes for the degradation of materials that reduces the creep-fatigue life at high temperatures. In a previous investigation, a model for life prediction under creep-fatigue conditions was proposed in terms of cavity nucleation and growth. In that model, the cavity nucleation factor (P) was introduced to correlate between the number of cavities and the plastic strain range from which athermal vacancies are generated. It was considered to be a material specific constant which was independent of the experimental conditions. However, in this study, it is found that the cavity nucleation factor is a function of the plastic strain range but is independent of the testing temperature at near 0.5 T _m. In the light of this dependency, a new cavity nucleation factor (P'), is introduced. Using this new cavity nucleation factor (P'), a modified equation for life prediction is proposed, and it is shown that there is good agreement between predicted and experimental lives. Additionally, an interesting approach has been made to find the physical meaning of the new cavity nucleation factor (P'). According to this study, it is suggested that the new cavity nucleation factor, which is regarded as a material specific constant, is found to be strongly related to the density of the grain boundary precipitates with a linear relationship existing between them.     

On the selective counting of third-order products

A practical and efficient method is presented for the counting of third-order products generated by an arbitrary number of carriers with arbitrary power spectral shapes. In particular, three selective counting procedures (i.e. sorting by position, sorting by position and group, and sorting by position, group, and kind) are introduced in a systemic way, based upon a discrete third-order Volterra model. The advantage of the counting algorithm is that (1) the algorithm provides the exact counting of third-order products of all eleven possible groups; (2) the counting process requires only two multiplications for the selective counting of third-order products at each position, and the algorithm, which is thus efficient, can be easily implemented