Improvement of the basic correlating equations and transition criteria of natural convection heat transfer

In this paper, improvements in the basic physical laws of natural convection heat transfer were implemented in two major respects by incorporating recent research findings in this field. A preferred transition criterion was adopted in this paper to correlate all of the experimental data. Since transition correlations are primarily flow stability problems, the Grashof number, instead of the Rayleigh number, was found to be the preferred criterion. Furthermore, in the case of natural convection heat transfer from a horizontal cylinder, a series of experimental data in the high‐Rayleigh‐number regions recently became available. These data made it possible to establish new reliable correlations and also to test the validity of previous correlations. It is concluded that the previous correlation for a horizontal cylinder in high‐Rayleigh‐number regions was based on unreliable experimental results. The transition correlation for a horizontal cylinder occurred at much higher values of Rayleigh number than the previous recommendation. In the case of natural convection heat transfer from a vertical plate, more accurate property values for air under pressurized conditions are now available. This made it possible to replot the reliable data of Saunders. From this result and the experimental result of Warner and Arpaci, a new set of basic correlations in natural convection heat transfer for laminar, transitional, and turbulent regimes are recommended. These recommendations reflect a better understanding of the basic physical laws in the field of heat convection. © 2001 Scripta Technica, Heat Trans Asian Res, 30(4): 293–300, 2001     

Thermal performance of a packed bed reactor for a high‐temperature chemical heat pump

The thermal performance of a chemical heat pump that uses the reaction system of calcium oxide/lead oxide/carbon dioxide, which is developed for utilization of high‐temperature heat above 800°C, is studied experimentally. The thermal performance of a packed‐bed reactor of a calcium oxide/carbon dioxide reaction system, which stores and transforms a high‐temperature heat source in the heat pump operation, is examined under various heat pump operation conditions. The energy analysis based on the experiment shows that it is possible to utilize high‐temperature heat with this heat pump. This heat pump can store heat above 850°C and then transform it into a heat above 900°C under an approximate atmospheric pressure. An applied system that combines the heat pump and a high‐temperature process is proposed for high‐efficiency heat utilization. The scale of the heat pump in the combined system is estimated from the experimental results. Copyright © 2001 John Wiley & Sons, Ltd.     

High‐TC Interfacial Ferromagnetism in SrMnO3/LaMnO3 Superlattices

Heterostructures of strongly correlated oxides demonstrate various intriguing and potentially useful interfacial phenomena. LaMnO₃/SrMnO₃ superlattices are presented showcasing a new high‐temperature ferromagnetic phase with Curie temperature, T_C ≈360 K, caused by electron transfer from the surface of the LaMnO₃ donor layer into the neighboring SrMnO₃ acceptor layer. As a result, the SrMnO₃ (top)/LaMnO₃ (bottom) interface shows an enhancement of the magnetization as depth‐profiled by polarized neutron reflectometry. The length scale of charge transfer, λ_TF ≈2 unit cells, is obtained from in situ growth monitoring by optical ellipsometry, supported by optical simulations, and further confirmed by high resolution electron microscopy and spectroscopy. A model of the inhomogeneous distribution of electron density in LaMnO₃/SrMnO₃ layers along the growth direction is concluded to account for a complex interplay between ferromagnetic and antiferromagnetic layers in superlattices.     

Patterning of Flexible Transparent Thin‐Film Transistors with Solution‐Processed ZnO Using the Binary Solvent Mixture

Flexible transparent thin‐film transistors (TTFTs) have emerged as next‐generation transistors because of their applicability in transparent electronic devices. In particular, the major driving force behind solution‐processed zinc oxide film research is its prospective use in printing for electronics. Since the patterning that prevents current leakage and crosstalk noise is essential to fabricate TTFTs, the need for sophisticated patterning methods is critical. In patterning solution‐processed ZnO thin films, several points require careful consideration. In general, as these thin films have a porous structure, conventional patterning based on photolithography causes loss of film performance. In addition, as controlling the drying process is very subtle and cumbersome, it is difficult to fabricate ZnO semiconductor films with robust fidelity through selective printing or patterning. Therefore, we have developed a simple selective patterning method using a substrate pre‐patterned through bond breakage of poly(methyl methacrylate) (PMMA), as well as a new developing method using a toluene–methanol mixture as a binary solvent mixture.     

An improved procedure of electron microscopic in situ hybridization for detecting adenovirus DNA

Electron microscopic in situ hybridization (EM-ISH) is a useful method in determining the localization of a specific nucleic acid at the ultrastructural level. Since the EM-ISH protocol includes many steps, no standard protocol for EM-ISH is available yet. In this study, we optimized quantitatively the critical conditions with respect to embedding resin, nucleic acid labeling and hybridization reaction time, by using adenovirus-infected cells as the indicator cells. The optimal detection of an adenovirus-specific nucleic acid was obtained by overnight hybridization reaction on sections embedded in Lowicryl K4M resin. Random-primed-labeled probes improved the reactivity. At least 60% of virus particles in paracrystalline arrays was found to contain viral DNA. These arrays in adenovirus-infected cells are useful in evaluating quantitatively the efficiency of protocols of EM-ISH.     

Pure‐Red Dye for Organic Electroluminescent Devices: Bis‐Condensed DCM Derivatives

In this paper, the bis‐condensed 4‐(dicyanomethylene)‐2‐methyl‐6‐[p‐(dimethylamino)styryl]‐4H‐pyran ( DCM) derivatives are introduced as a new class of red dye for organic light‐emitting devices (OLEDs). They showed more red‐shifted emission than the mono‐substituted DCM derivatives and the emission maxima increased as the electron‐donating ability of the aromatic donor group increased. On the basis of these results, red light‐emitting devices were fabricated with bis‐condensed DCM derivatives as red dopants. For a device of configuration ITO/TPD/Alq₃ + DADB (5.2 wt.‐%)/Alq₃/Al (where ITO is indium tin oxide, TPD is N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine, Alq₃ is tris(8‐hydroxyquinoline) aluminum, and DADB is [2,6‐bis[2‐[5‐(dibutylamino)phenyl]vinyl]‐4H‐pyran‐4‐ylidene]propanedinitrile), pure red emission was observed with Commission Internationale de l’Eclairage (CIE 1931) coordinates of (0.658, 0.337) at 25 mA/cm².     

Effect of catch cup geometry on 3D boundary layer flow over the wafer surface in a spin coating

Recently, development of high technology has been required for the formation of thin uniform film in manufacturing processes of semiconductor as the semiconductor instruments become more sophisticated. Spin coating is usually used for spreading photoresist on a wafer surface. However, since rotating speed of the disk is very high in spin coating, the dropped photoresist scarers outward and reattaches on the film surface. A catch cup is set up outside the wafer in spin coating, and scattered photoresist mist is removed from the wafer edge by the exhaust flow generated at the gap between the wafer edge and the catch cup. In the dry process of a spin coating, it is a serious concern that the film thickness increases near the wafer edge in the case of low rotating speed. The purpose of this study is to make clear the effect of the catch cup geometry on the 3D boundary layer flow over the wafer surface and the drying rate of liquid film.     

Decision-making in electrical appliance use in the home

This paper presents the results of a survey as well as an argument from the viewpoint of behavioral economics with the aim of clarifying how consumers make decisions about electrical appliance use in the home. A survey of consumers showed that most have little awareness of the energy efficiency of appliances, the price of the services produced by electrical appliances, or electricity rates. These findings indicate that price does not function as a signal in electricity consumption through electrical appliance use. Rather, we found that consumer decision-making in electricity consumption is dependent on the characteristics of the particular electrical appliances they use. Additionally, we argue that the payment system for home electricity consumption plays an important role in decision-making, causing biases due to aspects of human psychology discussed here in terms of satisficing and heuristics, payment decoupling, and budgeting. We conclude that decision-making about electrical appliance use and electricity consumption in the home is not always rational and is affected both by the particular characteristics of appliances and the payment system for electricity consumption along with human psychology.     

Illuminating Dark Plasmons of Silver Nanoantenna Rings to Enhance Exciton–Plasmon Interactions

The chemical growth of silver nanorings that possess singly twinned crystals and a circular cross section via a reductive reaction solution is reported. The wire and ring diameters of the synthesized nanorings are in the ranges 80–200 nm and 4.5–18.0 μm, respectively. By lighting up the multipolar dark plasmons with slanted illumination, the silver nanoring exhibits unique focused scattering and large local‐field enhancement. We also demonstrate strong exciton–plasmon interactions between a monolayer of CdSe/ZnS semiconductor quantum dots and a single silver antenna‐like nanoring (nanoantenna) at the “hot spots” located at the cross points of the incident plane and nanoring; the position of these spots are tunable by adjusting the incidence angle of illumination. The tunable plasmonic behavior of the silver nanorings could find applications as optical nanoantennae or plasmonic nanocavities.     

Over 1.3 /spl mu/m CW laser emission from InGaSb quantum-dot vertical-cavity surface-emitting laser on GaAs substrate

An Sb-based quantum-dot vertical-cavity surface-emitting laser (QD-VCSEL) operating in the 1.3 /spl mu/m optical communication waveband is presented. A QD-VCSEL containing high-density InGaSb QDs in the active region is fabricated on GaAs substrate. The density of InGaSb QDs is drastically increased using a new method of an Si atom irradiation technique. A long-wavelength laser emission at 1.34 /spl mu/m is successfully achieved on the InGaSb QD-VCSEL in CW operation at room temperature.