Nitroarene concentrations and direct-acting mutagenicity of diesel exhaust particulates fractionated by silica-gel column chromatography

Diesel exhaust particulates were extracted with benzene-ethanol (3:1, v/v) and separated into five fractions by silica-gel column chromatography. Direct-acting mutagenic activity was assayed by the Ames test using the Salmonella typhimurium YG1024 strain. The total activity of five fractions was about four times greater than that of the crude extract, suggesting that the activities in the fractions were suppressed in the crude extract. Strong activity was observed in fraction 4 which was eluted with dichloromethane (61.5% of the total activity) and fraction 5 which was eluted with ethanol (35.3%). Nitropolycyclic aromatic hydrocarbons (NPAHs) were determined by high-performance liquid chromatography with chemiluminescence detection. They were found mainly in fraction 4, although one NPAH was in fraction 3 which was eluted with n-hexane-dichloromethane (3:1, v/v). Based on these results, 53.1% of the activity in fraction 4 was attributed to NPAHs. The contribution of 1-nitropyrene and 1,3-, 1,6- and 1,8-dinitropyrenes was great and that of the other NPAHs was small. The mutagenic compound in fraction 5 was not identified. Fractions 1 and 2, which were eluted with n-hexane, and fraction 3 suppressed the activity of fraction 4. Polycyclic aromatic hydrocarbons in fractions 2 and 3 were considered as possible suppressors of NPAHs.     

Friction coefficients in cold forging: A global perspective

Worldwide, at least twenty different tribological tests have been proposed for the empirical determination of friction coefficients in cold forging processes. Due to the varying test setups, means of measurement, and level of abstraction, the comparability of the outcomes is, however, disputable. Within this work, six established test principles are compared using identical tribological systems. Large differences between the empirically determined friction coefficients are observed but can be explained under consideration of the respective tribological loads. Additional investigations of an extrusion process reveal that friction models also have to take into account the varying local thickness of the lubricant film.     

Simple evaluation of aortic arch calcification by chest radiography in hemodialysis patients

Vascular calcification is associated with a poor prognosis in dialysis patients. It can be assessed with computed tomography but simple inoffice techniques may provide useful information. We compared the results obtained with a simple noninvasive technique with those obtained using multidetector computed tomography for aortic arch calcification volume (AoACV) in chronic hemodialysis (HD) patients. The enrolled study subjects were 63 (32 men and 31 women) maintenance HD patients. Calcification of the aortic arch was semiquantitatively estimated with a AoAC score (AoACS) on plain chest radiology. The AoACV was increased, with a mean value of 6.6 ranging from 0% to 36.5%. The coefficient of intraobserver variation was less than 2.5%. Aortic arch calcification score was highly correlated with AoACV (r=0.635, P<0.001). Multiple regression analysis showed age (F value=12.62, P<0.001) and pulse pressure (F value=4.54, P=0.037) to be significant independent determinants of AoACS. In conclusion, a simple measurement of AoACS may be useful for inoffice imaging to choose a therapeutic regimen in HD patients.     

Structural analysis and transistor properties of hetero-molecular bilayers

We examined the film morphologies and transistor properties of hetero-molecular bilayer consisting of N, N’-dioctyl-3, 4, 9, 10-perylenedicarboximide (PTCDI-C₈) and quaterrylene. First, the structure and carrier conduction of PTCDI-C₈ films were studied, followed by an analysis of the carrier accumulation process in a PTCDI-C₈/quaterrylene hetero-bilayer transistor. Based on the displacement current measurement (DCM), we stress the potential of the hetero-bilayer for tuning carrier accumulation like carrier doping techniques in field-effect transistors.     

Area and volume effects on breakdown strength in liquid nitrogen

We measured dc and ac breakdown voltages in liquid nitrogen (LN ₂) with a sphere-to-plane electrode configuration. Experimental results revealed that the breakdown voltage in LN₂ did not increase monotonously but partially decreased as the sphere diameter increased at a constant gap length. Thus, the existence of the area and the volume effects on the breakdown voltage in LN₂ was verified quantitatively; the breakdown strength decreased when increasing the {SEA}₉₀ (90% stressed electrode area) and the {SLV}₉₀ (90% stressed liquid volume). By changing the experimental conditions, it was verified that both area and volume effects, having a mutual correlation, simultaneously lead to the degradation of the breakdown strength in LN₂. In order to examine the area and the volume effects for the larger {SEA}₉₀ and {SLV}₉₀, we also measured the breakdown voltage with a coaxial cylindrical electrode. It was concluded that the dc and ac breakdown strengths in LN₂ decreased as the {SEA}₉₀ and the {SLV}₉₀ increased varying widely from 10⁰ to 10⁵ mm² and from 10 ^-1 to 10⁵ mm³, respectively     

Simultaneous removal of NO/sub x/, SO/sub x/, and CO/sub 2/ at elevated temperature using a plasma-chemical hybrid process

In previous studies, the authors confirmed that the plasma-chemical combined hybrid process for controlling NO flue gas emission was extremely effective and economical in comparison with the conventional selective catalytic reduction (SCR) system and other technologies. In the present study, we carried out experiments on the simultaneous removal of NO/sub x/ and SO/sub x/ at elevated temperature using the plasma-chemical hybrid process. A series of experiments was performed to quantify all the reaction byproducts such as N/sub 2/O, CO, HNO/sub 2/, HNO/sub 3/, NO/sub 3//sup -/, and SO/sub 4//sup -/ to evaluate the simultaneous NO/sub x/ and SO/sub x/ removal efficiency. The oxidation from NO to NO/sub 2/ without decreasing NO/sub x/ concentration (i.e., minimum reaction byproducts) and with least power consumption is the key for the optimum operation of the plasma reactor. The produced NO/sub 2/ was totally converted to N/sub 2/ and Na/sub 2/SO/sub 4/ with Na/sub 2/SO/sub 3/ or Na/sub 2/S with and without NaOH using the barrier-type packed-bed plasma reactor followed by the packed-column chemical reactor. The NO/sub 2/ reduction was more effective for Na/sub 2/S than Na/sub 2/SO/sub 3/ but produces H/sub 2/S with Na/sub 2/S. For both cases at least five times the stoichiometric amount of chemicals were required for complete NO/sub 2/ reduction. Nearly 100% of NO/sub x/ and SO /sub 2/ and 40% Of CO/sub 2/ simultaneous removal were achieved with less than 5 ppm of N/sub 2/O and CO. The operating cost was less than 1/4 the SCR process. The additional SO/sub 2/ treatment system can be eliminated.     

Partial discharge inception characteristics under butt gap condition in liquid nitrogen/ PPLP/sup /spl reg// composite insulation system for high temperature superconducting cable

The partial discharge (PD) inception characteristics are studied in liquid nitrogen (LN/sub 2/)/polypropylene laminated paper (PPLP/sup /spl reg//) composite insulation system for high temperature superconducting (HTS) cable. Experimental results revealed that the magnitude of the initial PD increased as the PD inception electric field strength was increased, because the injected energy increased. Initial PD was generated at the first and third quadrant of applied AC voltage phase. The probability of initial PD at the positive and negative voltage phase was almost the same. The reason is because liquid nitrogen is a nonpolar molecule and we used symmetric electrode configuration with uniform electric field distribution. Finally, it was pointed out that PD inception electric field strength (PDIE) depended on the volume of the butt gap because of the increasing probability of weak points of electrical insulation, and PDIE linearly decreased with increasing stressed volume of the butt gap in the log-log scale.     

Visualization of epileptogenic phenomena using cross-correlation analysis: localization of epileptic foci and propagation of epileptiform discharges

The main objectives of the preoperative evaluation of a patient with medically intractable epileptic seizures are localization of the foci and propagation of the epileptiform discharges. Electrocorticographic (ECoG) data of intractable focal epilepsy were analyzed using an AR model, wavelet analysis, and cross-correlation analysis. In order to derive the time-shifts, the cross correlations of the epileptiform discharges were calculated between electrodes for every unit of time. Further analyses were made by means of a set of contour maps of the time-shifts and sequential two- and three-dimensional visualizations of the time-shift maps in order to localize the epileptic foci and study their propagation process. Two types of foci and propagation were revealed in the results. In the first type, epileptiform discharges were generated at localized focal sites and spread quickly to other sites. In the second type, the foci of epileptiform discharges, which appeared soon after the former bursts, were localized at more than one site, and the discharges tended to spread more slowly. The findings suggest that epileptic phenomena can be caused by at least two kinds of mechanisms in one patient: in the former, the propagation might be mediated through synaptic projections, while in the latter, the extracellular diffusion of an excitatory factor might play an important role. In addition, our newly developed visualization technique for the localization of epileptic foci and the propagation of epileptiform discharges should prove useful in the study of epileptogenesis etiology.     

Determination of potent odorants in apple by headspace gas dilution analysis

Gas chromatography-olfactometry with headspace gas dilution analysis was used to evaluate the odor potencies of volatile compounds in Fuji apple. To improve the resolution of volatile compounds, the dilution analysis was conducted on two types of capillary columns with different polarities. Thirty three and 20 compounds were identified on DB-WAX and DB-5 columns, respectively. Methyl 2-methylbutanoate, isobutyl acetate, ethyl butanoate, ethyl 2-methylbutanoate, isopentyl formate, butyl acetate and hexyl acetate as well as hexanal were important odor contributors in the headspace gas of apple on the basis of high Flavor Dilution (FD) factors. Threshold values-in-air of these compounds were also estimated from the relationships between their FD factors and concentrations. Methyl 2-methylbutanoate and ethyl 2-methylbutanote were considered as the most potent odorants because of their lowest threshold values. In addition, the threshold values-in-air of isopentyl formate, isopentyl acetate and butyl isobutanoate, which have never been reported, were estimated at 0.149, 1.95 and 0.00607 μl/l, respectively.