Selective oxidation of ethane and propane over sulfated zirconia‐supported nickel oxide catalysts

The oxidative dehydrogenations of ethane and propane were investigated over a series of zirconia and nickel‐oxide supported on zirconia catalysts. It was found that zirconia, sulfated zirconia as well as NiO‐based zirconia catalysts showed high catalytic activities for oxidative dehydrogenation of ethane and propane. However, conversion and selectivity differed depending on the nature of the catalysts. Zirconia, sulfated zirconia (SZ) and their supported NiO catalysts showed high ethane conversions but lesser selectivities to olefins while NiO/Li₂ZrO₃ exhibited high selectivities to ethylene and propylene. Addition of an LiCl promoter in the NiO/SZ catalyst increased the catalytic activity and olefin selectivity, thus resulting in a higher olefin yield. In the oxidative dehydrogenations of ethane and propane NiO–LiCl/SZ exhibited 79% ethylene selectivity at 93% ethane conversion at 650 °C and 52% selectivity to propylene at 20% propane conversion at 600 °C, respectively. Characterization showed that the physico‐chemical properties of the catalysts determine the catalytic activity and selectivity. © 2001 Society of Chemical Industry     

Polymerization of styrene with a simple rare earth metal initiator

The catalytic activity in the polymerization of styrene has been examined using commercially available simple rare earth metal compounds such as Sm(OiPr)₃, Sm(acac)₃, Sm(OCOMe)₃, SmI₂(THF)₂ or SmCl₃ coupled with Et₃Al or methylaluminoxane (MAO). Among these compounds, the Sm(OiPr)₃/AlEt₃ system shows the highest catalytic activity, especially in the presence of a minor amount of toluene at 60 °C. The random copolymerization of styrene with methyl methacrylate suggests that the present polymerization proceeds with a radical polymerization mechanism. (C₅Me₅)SmCl₃Na(THF) and (C₅Me₅)SmCl₃Li(THF) systems exhibit relatively low catalytic activity, even in the presence of AlEt₃. © 2001 Society of Chemical Industry     

Outcomes of 50 leukemia patients who received bone marrow transplants from unrelated donors]

In this study, we examined the ability of tumour necrosis factor-alpha (TNF) to stimulate the mitogen-activated protein (MAP) kinase homologues p42/44 MAP kinase, c-Jun NH2-terminal kinase (JNK) and p38 MAP kinase and its effect upon DNA synthesis in primary cultures of bovine aortic endothelial cells (BAECs). TNF strongly stimulated p38 MAP kinase and JNK activity in both a time- and concentration-dependent manner. By contrast, TNF was a very poor activator of p42/44 MAP kinase relative to the known activator of p42/44 MAP kinase in endothelial cells, adenosine triphosphate (ATP). TNF-stimulated activation of p38 MAP kinase, and MAPKAP kinase-2, a known downstream target of p38 MAP kinase, was strongly inhibited by pre-incubation with the p38 MAP kinase inhibitor SB203580, whereas the minor activation of p42/44 MAP kinase was abolished by pre-incubation of the cell with the novel MAP kinase kinase 1 inhibitor PD098059. Addition of TNF resulted in a 50-60% decrease in DNA synthesis in BAECs. Pre-incubation with PD098059 or co-incubation with ATP failed to modify the inhibitory effect of TNF upon DNA synthesis. SB203580 reduced basal DNA synthesis by approximately 50%; however, if failed to modify the inhibition mediated by TNF. These results indicate that TNF strongly activates both p38 MAP kinase, JNK and, to a minor extent, p42/p44 MAP kinase. It is likely that only one of these kinases, JNK, plays a role in the regulation of DNA synthesis in these cells.     

A Silicon Plasma-Based Wideband Modulator

Theoretical and experimental analysis has been performed for surface oriented silicon plasma-based p,i,n structures used to control high power level, broadband devices. It is shown that these structures are very promising for their use as modulators in the millimeter and submillimeter wave range.     

Filter-embedded design and its applications to passive components

A design in which a filter is embedded in a fiber fixed on a substrate is proposed. It was successfully applied to the fabrication of low loss fiber optic components for a single-mode fiber transmission system. These components have a wide operational temperature range. The design is easily adapted to a multifilter or multifiber component. Filter embedding is achieved in two ways. One is to insert a thin filter chip in a slit which is machined into a fiber fixed on a substrate by a dicing saw (filter inserted type). The other is to evaporate a filter film directly on a fiber end face and butt this fiber to another fiber on a guide groove on a substrate (filter evaporated type)     

Dynamic breakdown characteristics of liquid helium induced by aquench of superconducting wire and coil

For practical insulation design of superconducting power apparatus, it is necessary to take into account an inherent phenomenon known as quench, the transition from the superconducting to the normal state. We investigated quench-induced dynamic breakdown and prebreakdown characteristics of liquid helium (LHe). Experimental results revealed that the quench of the superconductor drastically reduced the breakdown voltage of LHe in the thermal bubble disturbance. Moreover, dynamic breakdown characteristics in a quasi-uniform field using a superconducting coil were investigated. The results revealed that the breakdown was induced in the quench-initiated region where the largest thermal energy was generated     

Insulation performance of pressurized liquid helium underquench-induced thermal bubble disturbance for superconducting powerapparatus

We have been studying quench-induced `dynamic' breakdown characteristics of LHe and have already found that the electrical insulation performance of LHe was degraded drastically by the thermal bubble disturbance due to quench of superconductors. In this paper, in order to improve the insulation performance of LHe under quench conditions, we measured dynamic breakdown and prebreakdown characteristics of pressurized LHe. Experimental results revealed that breakdown voltage of LHe under quench conditions at 0.2 MPa was greatly improved, reaching 2 to 4× compared with that at atmospheric pressure under both uniform and non-uniform electric fields. Moreover, for practical and efficient insulation design of superconducting power apparatus, we investigated the dynamic breakdown voltage of LHe as functions of pressure and gap length