Lifetime prediction of woven GFRP laminates under constant tensile loading in hydrothermal environment

This study aims to investigate the effects of a hydrothermal environment on the creep behavior of woven glass fiber reinforced plastics (GFRPs) and to propose a method for predicting their lifetime. Toward this end, experiments were carried out in air and deionized water at 40, 60, 80 and 95 ^°C. Static tensile tests of woven GFRP were conducted in air and in deionized water to evaluate its mechanical properties and to determine suitable experimental conditions for subsequent constant tensile load tests. The mechanical properties of the woven GFRP decreased with an increase in temperature and with water immersion. Constant tensile load tests were also conducted in air and in deionized water to investigate the creep behavior and fracture time. The fracture time decreased with an increase in stress and water temperature and demonstrated the possibility of a threshold stress for fracturing. In addition, the fracture time during each constant tensile load test was predicted using a modified Reiner–Weissenberg (R-W) criterion, which is a failure criterion for linear viscoelastic materials based on the accumulation of dissolved energy within the GFRP. In this study, the R-W criterion was modified to consider the effects of degradation and its acceleration, which are due to the applied stress and immersion in a solution. The predicted results were in good agreement with the experimental data when considering the effects of hydrothermal aging.     

Effect of polyethyleneimine-fatty acid complex type dispersant structure on the overall processing chain of Si3N4 ceramics using multicomponent non-aqueous slurries

The effect of fatty acid structure of polyethyleneimine (PEI)-fatty acid complex, which was designed as a polymer dispersant for multi-component non-aqueous slurries, on the overall processing chain of Si₃N₄ ceramics involving slurry stabilization, spray drying, compaction, and liquid sintering was investigated using PEI-oleic acid (PEI-OA) and PEI-isostearic (PEI-ISA) complexes. Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries were selected as a real model for Si₃N₄-based multicomponent slurries. It was observed that both PEI-OA and PEI-ISA can stabilize Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries; however, the PEI-ISA system tended to have slightly higher slurry viscosity, which was suspected to be due to the interactions between protruded PEI segments among short ISA chains. The spray-dried granules from PEI-ISA-stabilized slurry were observed to have filled structures with higher surface roughness whereas those prepared from PEI-OA-stabilized slurry were observed to have hollow-structured granules. The granules prepared from PEI-OA slurry had improved flow and compaction properties with higher relative density of green compacts compared with those prepared from PEI-ISA-stabilized slurry, whereas the relative density and microstructural homogeneity of S₃N₄ ceramics sintered at 1600?°C for 2?h were observed to be higher for the PEI-ISA system. It is suspected that PEI-OA effectively improved the dispersion stability of multicomponent slurries and flow/compaction properties of granules; however, the inhomogeneous microstructures of green compacts induced by the hollow-structured granules had an adverse effect on the sintering of Si₃N₄ ceramics.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

Travel Time Reliability in Vehicle Routing and Scheduling with Time Windows

This paper presents calibration of the Vehicle Routing and scheduling Problems with Time Windows-Probabilistic (VRPTW-P) model which takes into account the uncertainty of travel times. Probe vehicle data of travel times were obtained from usual operation of pickup-delivery trucks in South Osaka area. The optimal solution of the VRPTW-P model resulted in reducing total cost, running times and CO₂, NOx and Particle Materials (PM) emissions compared with the usual operation. This is attributed to better routing of VRPTW-P to choose more reliable roads. Therefore, VRPTW-P can contribute to establish efficient and environmentally friendly delivery systems in urban area.     

Novel Phase Transition in BaPr2Mn2O7

The rare earth manganite BaLn2Mn2O7 (Ln=rare earth element) has a Sr3Ti2O7-type layered perovskite structure with double-block oxygen octahedra belonging to the Ruddlesden-Popper-type homologous series AO(ABO3)2. In Pr-manganite, a novel phase transition was first observed in situ at 1040 K by a thermal transmission electron microscope. At 1040 K, reflections began to split along the c-direction in the selected area diffraction pattern. This indicates that a new phase appears in the original phase matrix; the c length of the new phase is 1.5% longer than that of the original phase. After about 5 min, the original phase disappears. No change in the crystal symmetry (space group I4/mmm) is observed above 1040 K.     

Evaluation of highly damaged renal function following extracorporeal circulation--usefulness of alpha 1-microglobulin index

The patients with highly damaged renal functions following extracorporeal circulation (ECC) were reviewed. Markers such as serum and urine creatinine (SCr, UCr), blood urea nitrogen (BUN), alpha 1-microglobulin in urine (as a marker of renal tubular function, abbreviated as U alpha 1-m), microalbumin in urine (as a marker of renal glomerular function, abbreviated as UA1b) were measured in each cases. Twenty patients were selected with the maximum value of U alpha 1-mover 60 micrograms/dl during or after ECC. The patients were classified into three groups according to preoperative value of alpha 1-m index (alpha 1-m index (I) = U alpha 1-m/UCr x 100 mg/g Cr), and Albumin index (Albumin index (I) = UA1b/UCr x 100 mg/g Cr). Group I (n = 13); alpha 1-m I > 10 and, Alb I > or = 50 (abnormal value of tubular and glomerular function), Group II (n = 3); alpha 1-m I < or = 10, Alb I > or = 50 (abnormal value of glomerular function), Group III (n = 4); alpha 1-m I < or = 10, Alb I < 50 (normal value of tubular and glomerular function). Six patients in Group I required postoperative hemodialysis (HD) and one patient in Group II. No one required HD in Group III. These facts suggest that preoperative damage of tubular and glomerular functions may become prolonged or irreversible damages may occur after operation. HD is required frequently in patients with alpha 1-m I level over 500 mg/g Cr, especially continuous HD may be needed in patient with alpha 1-m I level over 1000 mg/g Cr.     

Basic design of 70-MW-class superconducting generators

The application of superconductivity technology to electric power apparatus is very important from the viewpoint of energy saving. Especially, the superconducting generators using superconductors as the field windings have many merits compared with conventional generators. Super-GM has been researching and developing 70-MW-class model machines since FY 1988 for a scheduled period of eight years, aiming at a 200-MW-class superconducting generator. This paper describes the basic specifications and designs of 70-MW-class superconducting generators by Super-GM and also describes the propriety of these basic specifications and designs.