Preparation and Properties of Bi4 − x Nd x Ti3O12 Thin Films by Chemical Solution Deposition

Neodymium-modified Bi₄Ti₃O₁₂, (Bi, Nd)₄Ti₃O₁₂ (BNT) ferroelectric thin films have been prepared on Pt/TiO_x/SiO₂/Si substrates using metal-organic precursor solutions by the chemical solution deposition method. The BNT precursor films crystallized into the Bi layered perovskite Bi₄Ti₃O₁₂ (BIT) as a single-phase above 600C. The synthesized BNT films revealed a random orientation having a strong 117 reflection, whereas non-substituted BIT thin films exhibited a random orientation with strong 00l diffractions. Among Bi_{4 – x}Nd_xTi₃O₁₂ [x = 0.0, 0.5, 0.75, 1.0] thin films, Bi_3.25Nd_0.75Ti₃O₁₂ thin films showed a well-saturated P-E hysteresis loop with the highest P_r (22 C/cm²) and a low E_c (69 kV/cm) at an applied voltage of 5 V. The Nd-substitution with the optimum amount for the Bi site in the BIT structure was effective not only for promoting the 117 preferred orientation but also for improving the microstructure and ferroelectric properties of the resultant films.     

The influence of a fibre structure on optical loss in a graded-index fibre

For designing a fibre structure, the influence of structural parameters on optical loss is investigated experimentally for a graded-index fibre. The fibre with large cladding/outer-layer index difference and small cladding thickness is found to have large excess loss near excitation points, such as a launching point and a splicing point.     

Terrain height measurement by synthetic aperture radar with an interferometer

This paper describes the terrain height measurement capability of synthetic aperture radar with an interferometer assuming the radar operates on a satellite. The interferometer phase measurement uncertainty due to additive thermal noise and multiplicative speckle noise, which determine the upper limit of the height measurement accuracies of this radar system, has been obtained by numerical simulation. The height measurement accuracies attainable on a relatively flat terrain areas are of roughly the same order as range resolution when C- or X- band radar is operated at an altitude of 300 km.     

Sintering Kinetics at Isothermal Shrinkage: Effect of Specific Surface Area on the Initial Sintering Stage of Fine Zirconia Powder

The isothermal shrinkage behaviors of fine zirconia powders (containing 2.8–2.9 mol% Y₂O₃) with specific surface areas of about 6 and 16 m²/g were investigated to clarify the effect of specific surface area on the initial sintering stage. The shrinkage of powder compact was measured under constant temperatures in the range of 1000°–1100°C. The increase in specific surface area enhanced the densification rate with increasing temperature. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. The Q of diffusion changes little but the β₀ increases with the increase in specific surface area. It is therefore concluded that the increase in the specific surface area of fine zirconia powder enhances the shrinkage rate because of an increase in the β₀ at the initial stage of sintering.     

Planar‐Chiral Cyclopentadienyl‐Ruthenium‐Catalyzed Regio‐ and Enantioselective Asymmetric Allylic Alkylation of Silyl Enolates under Unusually Mild Conditions

We report the asymmetric allylic alkylation of allylic chlorides with silyl enolates as a carbon nucleophile using a planar‐chiral cyclopentadienyl‐ruthenium (Cp′Ru) catalyst. The reaction proceeds under unusually mild conditions to give the desired branched products with complete regioselectivity and high enantioselectivity, and reactive functional groups, such as aldehyde, can be tolerated. In this reaction system, Cp′Ru plays an important role in activating both silyl enolate and allylic chloride.

     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

One-Step Oxidation of Benzene to Phenol over Cu/Ti/HZSM-5 Catalysts

The gas-phase catalytic oxidation of benzene over copper supported on HZSM-5 added with titanium (Cu/Ti/HZSM-5) was carried out by using molecular oxygen as an oxidant. Phenol was effectively produced by the titanium addition to Cu/HZSM-5. The titanium addition to Cu/HZSM-5 induces the easy reduction of Cu²⁺ species to Cu⁺ species in the catalysts, and the produced Cu⁺ species seems to produce the phenol effectively.     

Sintering Kinetics at Constant Rates of Heating: Effect of Al2O3 on the Initial Sintering Stage of Fine Zirconia Powder

The sinterabilities of fine zirconia powders including 5 mass% Y₂O₃ were investigated, with emphasis on the effect of Al₂O₃ at the initial sintering stage. The shrinkage of powder compact was measured under constant rates of heating (CRH). The powder compact including a small amount of Al₂O₃ increased the densification rate with elevating temperature. The activation energies at the initial stage of sintering were determined by analyzing the densification curves. The activation energy of powder compact including Al₂O₃ was lower than that of a powder compact without Al₂O₃. The diffusion mechanisms at the initial sintering stage were determined using the new analytical equation applied for CRH techniques. This analysis exhibited that Al₂O₃ included in a powder compact changed the diffusion mechanism from grain boundary to volume diffusions (VD). Therefore, it is concluded that the effect of Al₂O₃ enhanced the densification rate because of decrease in the activation energy of VD at the initial sintering stage.     

Analysis of enoyl-coenzyme A hydratase activity and its stereospecificity using high-performance liquid chromatography equipped with chiral separation column

Enoyl-coenzyme A (CoA) hydratase catalyzes the hydration of trans-2-enoyl-CoA to yield 3-hydroxyacyl-CoA during fatty acid degradation (β-oxidation). Although much research has focused on the stereospecificities of 2-enoyl-CoA hydratases, a direct quantification of the production of 3(R)- and 3(S)-hydroxyacyl-CoA has not yet been established. Therefore, we developed a method of concurrently quantifying 3(R)- and 3(S)-hydroxyacyl-CoA using high-performance liquid chromatography (HPLC) equipped with a chiral separation column. The optimized conditions for the separation of 3(R)-, 3(S)-hydroxyhexadecanoyl-CoA and trans-2-hexadecenoyl-CoA, were determined to be as follows: mobile phase of 35/65 (v/v) of 50 mM phosphate buffer (pH 5.0)/methanol; flow rate of 0.5 mL/min; detection at 260 nm; and column temperature of 25°C. This method was applied to subcellular fractions of rat liver; the results directly confirmed that 3(S)-hydroxyhexadecanoyl-CoA is the dominant product obtained from the heat-stable enoyl-CoA hydratase-catalyzed reaction of trans-2-hexadecenoyl-CoA. Finally, the stereospecificities of L-bifunctional protein (L-BP) and D-bifunctional protein (D-BP) were reinvestigated using this method, and it was confirmed that L- and D-BP yielded 3(S)- and 3(R)-hydroxyhexadecanoyl-CoA were yielded from trans-2-hexadecenoyl-CoA, respectively. 3(R)-Hydroxyacyl-CoA is a peroxisomal β-oxidation-specific intermediate. Therefore, this method is potentially useful not only studies regarding the stereochemistry of enoyl-CoA hydratase but also for the diagnosis of diseases caused by defects of peroxisomal enoyl-CoA hydratase.