Reclamation and additional alloying of 18Ni(350) maraging steel

The possibility of gainfully utilizing grade 18Ni(350) maraging steel scrap has been investigated, along with the effect of additional alloying with niobium. A vacuum induction melting and casting furnace was used for melting and additional alloying. The cast ingots were hot forged and their properties compared with those of the stock material. The composition of the reprocessed material was found to be within the prescribed range for 18Ni(350) steel, except for some loss in titanium content. The hardness and tensile strength of the recycled steel were similar to those of the stock material. A slight decrease in hardness in the aged condition could be attributed to loss of titanium during remelting. Charpy V- notch impact test-ing indicated significantly higher toughness in the remelted material; this has been attributed to a homo-geneous, refined microstructure and a lower level of inclusions. Additional alloying with 2% Nb not only improved the mechanical properties but also affected the amount of reverted austenite obtained after ag-ing.     

Studies with inorganic precipitate membranes—XI: Evaluation of the thermodynamically effective fixed charge density by various methods

Thermodynamically effective fixed charge densities of parchment supported membranes were estimated by methods of (a) Teorell—Meyer—Sievers, (b) Altug and Hair, and (c) the most recent one of Kobatake based on the thermodynamics of irreversible processes. The two limiting forms of Kobatake's equation for dilute and concentrated ranges gave identical values of charge densities. It is interesting to note that these two values of limiting cases are closer to the Teorell—Meyer—Sievers and Altug and Hair values. The theoretical prediction for membrane potential by the Kobatake's equation were borne out quite satisfactorily by experimental results obtained with both the membranes.     

Preparation of Shape Memory Polyurethane/Hydroxyapatite Nanocomposite Scaffolds by Electrospinning Method and Investigation of Their Microstructure and Physical-Mechanical Properties

ABSTRACT

A facile method was used for fabricating in-situ-polymerized shape memory polyurethane (PU) hydroxyapatite (HA) nanocomposite scaffolds through electrospinning. The chemical structure and hydrogen bonding index (HBI) content were investigated using Fourier transform infrared spectroscopy. The crystalline morphology was analyzed by X-ray diffraction patterns. Differential scanning calorimetry was conducted to determine the glass transition temperature (T_g ) and degree of crystallinity. The results revealed that HA nanoparticles provide significant reinforcement of PU. Furthermore, incorporation of HA nanoparticles improved the shape memory properties of nanocomposites. The effect of HA nanoparticles on PU/HA electrospun fiber diameter, porosity, mechanical, and shape memory properties were examined.     

Oxygen free radical and cytokine generation during endovascular and conventional aneurysm repair

The parents of 31 children with malignant disorders were clinically examined and interviewed to characterize their life situation and somatic health during treatment of their child. The follow-up was for 7 years. Comparison groups were from the mean Finnish population matched for age, sex and occupation. The parents were generally healthy. Hypertension, headache and abdominal pain were the main symptoms. Sick leave and contact with a physician were less common than in the control population. The frequency of paramedical drug use was high but tranquilizers were used rarely. At the beginning the mothers had many symptoms indicating stress. Their attitude about their own state of health improved during the follow-up in spite of ageing. The spare-time physical activities of the parents increased during follow-up. Few marital conflicts and problems with the siblings were reported. The increment in economic burden caused by the child's disease was not regarded as essentially changing the family life.     

Site-specific fabrication and epitaxial conversion of functional oxide nanodisk arrays

Nanodisk arrays of technologically important magnetic (CoFe(2)O(4)) and ferroelectric (BaTiO(3)) oxides are fabricated on diverse substrates with well-defined size and separation using the soft-eBL approach. We demonstrate that below a certain pattern size, the as-deposited amorphous nanodisks can be readily converted into dense, single-crystal form that exhibit cube-on-cube heteroepitaxy with respect to the underlying single-crystal substrate. Such single-crystal disks show well-defined truncated-pyramid morphology that is consistent with Wulff construction. The mechanism of morphology development with the pattern size change is discussed. Localized characterization of the crystallinity, chemical composition, and magnetic behavior of the CFO nanodisk patterns are carried out using analytical transmission electron microscopy and magnetic force microscopy. Such solution-based epitaxial conversion of patterned arrays of multifunctional oxides has potential for viable cost-effective technological applications.     

Synthesis and characterization of new polyamides derived from 1,3‐(4‐carboxy phenoxy) propane and aromatic diamines

Six new polyamides 5a‐f containing flexible trimethylene segments in the main chain were synthesized through the direct polycondensation reaction of 1,3‐(4‐carboxy phenoxy) propane 3 with six derivatives of aromatic diamines 4a‐f in a medium consisting of N‐methyl‐2‐pyrrolidone, triphenyl phosphite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel polyamides containing flexible trimethylene segments in the main chain in high yield with inherent viscosities between 0.32 and 0.68 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). The glass‐transition temperatures of these polyamides were recorded between 165 and 190°C by differential scanning calorimetry, and the 10% weight loss temperatures were ranging from 360 to 430°C under nitrogen. 1,3‐(4‐Carboxy phenoxy) propane 3 was prepared from the reaction of 4‐hydroxy benzoic acid 1 with 1,3‐dibromo propane 2 in the presence of NaOH solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009