Optimal location of Hybrid Flow Controller considering modified steady-state model

This paper introduces a modified power flow model for Hybrid Flow Controller (HFC) as an energy flow controller. The existing power flow models for Hybrid Flow Controller are suitable only for conventional power flow analysis, and are not applicable for OPF and optimal location analysis of FACTS devices. In this paper, some modifications were applied to the existing models to promote the accuracy and improve their conformability on any power system and hence leading to a precise steady-state analysis. The modified model and the existing model are investigated using different IEEE test systems and the results are compared together. The optimization method is numerically solved using Matlab and General Algebraic Modelling System (GAMS) software environments. The solution procedure uses Mixed Integer Non-Linear Programming (MINLP) and Relaxed Mixed Integer Non-Linear Programming (RMINLP) to solve the optimal location and setting of HFC incorporated in OPF problem considering the total fuel cost, power losses, and the system loadability as objective functions for single objective optimization problem and improve the power system operation.     

Influence of reactive compatibilizers on the rheometrical and mechanical properties of PA6/LDPE and PA6/HDPE blends

In this work, the influence of reactive compatibilizers on the rheometrical and mechanical properties of polyamide 6/low density polyethylene (PA6/LDPE) and polyamide 6/high density polyethylene (PA6/HDPE) blends was investigated. Polyethylene grafted with maleic anhydride (PEgMA), polyethylene grafted with acrylic acid (PEgAA), and ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) were used as compatibilizers. The blends were characterized by torque rheometry, mechanical properties, and morphology. Rheometrical properties results show that PEgMA and PEgAA compatibilizers are more reactive with PA6 than EMA-GMA. Mechanical properties and scanning electron microscopy analysis results show that EMA-GMA compatibilizer is as effective as PEgMA and PEgAA for PA6/LDPE blend. For PA6/HDPE blend, PEgAA and EMA-GMA compatibilizers proved to be as effective as PEgMA. For PA6/HDPE blend compatibilized with PEgAA, an intriguing “web” or “bridge” like structure was observed.     

Enzymatic degradation of starch thermoplastic blends using samples of different thickness

The material studied was a thermoplastic blend of corn starch with a poly(ethylene-vinyl alcohol) copolymer, SEVA-C. The influence of both the material's exposed surface and enzyme concentration on degradation kinetics was studied. As alpha-amylase is present in the blood plasma, experiments were performed, varying the material thickness and the alpha-amylase between 50 and 100 units/l, at 37 degrees C, lasting up to 90 days. Four different batches using SEVA-C and starch samples of different thickness were performed. The positive correlation between degradation rate and the exposed material surface was confirmed, since thin films with larger exposed surfaces were degraded faster than thick square plates having the same total mass. The degradation extent depends on the total amount of amorphous starch present in the formulation rather than on the amount of enzyme used and the minimum thickness to ensure maximum degradation was estimated to be close to 0.25 mm.     

Bio-fuels production and the environmental indicators

The paper evaluates the role of the bio-fuels production in the transportation sector in the world, for programs of greenhouse gases emissions reductions and sustainable environmental performance. Depending on the methodology used to account for the local pollutant emissions and the global greenhouse gases emissions during the production and consumption of both the fossil and bio-fuels, the results can show huge differences. If it is taken into account a life cycle inventory approach to compare the different fuel sources, these results can present controversies. A comparison study involving the American oil diesel and soybean diesel developed by the National Renewable Energy Laboratory presents CO₂ emissions for the bio-diesel which are almost 20% of the emissions for the oil diesel: 136 g CO₂/bhp-h for the bio-diesel from soybean and 633 g CO₂/bhp-h for the oil diesel [National Renewable Energy Laboratory—NREL/SR-580-24089]. Besides that, important local environmental impacts can also make a big difference. The water consumption in the soybean production is much larger in comparison with the water consumption for the diesel production [National Renewable Energy Laboratory—NREL/SR-580-24089]. Brazil has an important role to play in this scenario because of its large experience in bio-fuels production since the seventies, and the country has conditions to produce bio-fuels for attending great part of the world demand in a sustainable pathway.     

Mass and heat transfer study in solids of revolution via numerical simulations using finite volume method and generalized coordinates for the Cauchy boundary condition

This paper proposes a numerical solution for the diffusion equation with convective boundary condition applied to solids obtained through the revolution of arbitrary bi-dimensional geometries, using generalized coordinates. The diffusion equation was discretized using the finite volume method, with a fully implicit formulation. The solution exploits symmetry conditions and that decreases the computational effort demanded, in comparison to the traditional use of three-dimensional grids. The proposed solution was used to describe diffusion processes which have a well-known solution. There was a good agreement among the results obtained through the proposed solution and the correspondent analytical solutions, as well as the experimental data.     

Temporal variations and spatial distribution of ambient PM2.2 and PM10 concentrations in Dhaka, Bangladesh

Concentrations and characteristics of airborne particulate matter (PM(10), PM(2.2) and BC) on air quality have been studied at two air quality-monitoring stations in Dhaka, the capital of Bangladesh. One site is at the Farm Gate area, a hot spot with very high pollutant concentrations because of its proximity to major roadways. The other site is at a semi-residential area located at the Atomic Energy Centre, Dhaka Campus, (AECD) with relatively less traffic. The samples were collected using a 'Gent' stacked filter unit in two fractions of 0-2.2 mum and 2.2-10 mum sizes. Samples of fine (PM(2.2)) and coarse (PM(2.2-10)) airborne particulate matter fractions collected from 2000 to 2003 were studied. It has been observed that fine particulate matter has a decreasing trend, from prior year measurements, because of Government policy interventions like phase-wise plans to take two-stroke three-wheelers off the roads in Dhaka and finally banned from January 1, 2003. Other policy interventions were banning of old buses and trucks to ply on Dhaka city promotion of the using compressed natural gas (CNG), introducing air pollution control devices in vehicles, etc. It was found that both local (mostly from vehicular emissions) and possibly some regional emission sources are responsible for high PM(2.2) and BC concentrations in Dhaka. PM(2.2), PM(2.2-10) and black carbon concentration levels depend on the season, wind direction and wind speed. Transport related emissions are the major source of BC and long-range transportation from fossil fuel related sources and biomass burning could be another substantial source of BC.     

Thermal anomalies in lanzarote (Canary Islands)

About a hundred thermometers have been installed 3 m deep in an area of about 20 km² in the ? Montañas de Fuego ? (island of Lanzarote). The temperatures measured oscillate between 16°C and 350°C. In other wells 150 to 250 m deep a gradient of 0.2°C/m has been measured. This gradient is always found in a region of about 200 km² around the zones of the highest superficial anomalies.The local surface anomalies are related to the outflow of hot fluids through tectovolcanic fractures. At great depths these fluids probably form a convective system under impervious layers (hyaloclastites?). The heat transfer takes place by means of convection in a deep reservoir and in the superficial levels, but an intermediate zone with impervious layers must exist where heat is transmitted by conduction.     

From death concepts to brain death diagnostic criteria

The authors present considerations about death and brain death concepts, as well the legal aspects for its diagnosis in Brazil. They also present the UNICAMP Protocol for the Diagnosis of Brain Death, revised and according with the current law, with standard techniques for the diagnostic exam. They emphasize the importance of a mature ethical position for this frequent and challenging situation.     

Unidirectional single-frequency operation of a Nd:YVO4 ring laser with and without a Faraday element

We demonstrate high-performance unidirectional and single-frequency ring-laser operation based on a diode-side-pumped Nd:YVO4 bounce amplifier, obtained in a ring system both with and without a Faraday rotating element. Ring-laser operation with intracavity Faraday unidirectional element produces 15-W cw output in a TEM00 and single-longitudinal mode with beam propagation parameter M2 < 1.1 with 35-W diode pumping. A novel non-Faraday-based ring laser uses a polarization-dependent output coupler and asymmetric polarization state in the birefringent Nd:YVO4 gain medium and is demonstrated to produce highly unidirectional (1200:1) single-frequency output of 14 W in a TEM00 mode with beam propagation factor M2 < 1.2 at 30 W of diode pumping.