Comparison of a new algorithm with the supervised classifications

In this study, a new classification algorithm in which only the selected pixels have been attempted to be classified (selected pixels classification: SPC) has been introduced and compared with the well known supervised classification methods such as maximum likelihood, minimum distance, nearest neighbour and condensed nearest neighbour. To examine the algorithm, Landsat Thematic Mapper (TM) data have been used to classify the crop cover in the selected region. It is clearly demonstrated that the SPC method has the higher accuracy with comparable CPU times.     

Effects of pretreatment and various operating parameters on permeate flux and quality during ultrafiltration of apple juice

The central composite design with a quadratic model was used to investigate the effect of temperature (20–40 °C) and transmembrane pressure (TMP) (100–300 kPa) as well as pretreatment with gelatin and bentonite (0:0–300:1500 mg L^?1) on permeate flux and fouling resistance during ultrafiltration of apple juice. The changes in some physicochemical properties were also investigated. Pretreatment of apple juice with gelatin and bentonite and an increase in the temperature and TMP significantly improved the permeate flux. In general, physicochemical properties of apple juice other than polyphenolics were not affected by the applied parameters. Using 150 mg L^?1 of gelatin and 750 mg L^?1 of bentonite for fining significantly reduced the total phenolic content and so did the fouling resistance. Fouling resistance also decreased with increasing temperature, and increasing pressure increased the fouling resistance.     

Standardization problem of author affiliations in citation indexes

Academic effectiveness of universities is measured with the number of publications and citations. However, accessing all the publications of a university reveals a challenge related to the mistakes and standardization problems in citation indexes. The main aim of this study is to seek a solution for the unstandardized addresses and publication loss of universities with regard to this problem. To achieve this, all Turkey-addressed publications published between 1928 and 2009 were analyzed and evaluated deeply. The results show that the main mistakes are based on character or spelling, indexing and translation errors. Mentioned errors effect international visibility of universities negatively, make bibliometric studies based on affiliations unreliable and reveal incorrect university rankings. To inhibit these negative effects, an algorithm was created with finite state technique by using Nooj Transducer. Frequently used 47 different affiliation variations for Hacettepe University apart from “Hacettepe Univ” and “Univ Hacettepe” were determined by the help of finite state grammar graphs. In conclusion, this study presents some reasons of the inconsistencies for university rankings. It is suggested that, mistakes and standardization issues should be considered by librarians, authors, editors, policy makers and managers to be able to solve these problems.     

Defining the suitability of new crushed rock aggregate source areas in the North of Kocaeli Province using GIS

This study evaluated the current crushed rock aggregate resources and defined the suitability of potential crushed rock aggregate resource areas in the north of Kocaeli Province by using the geographical information system (GIS). Evaluation of the current aggregate market showed that almost 80 % of the total annual production (14.35 million tonnes) is supplied by the quarries located in Gebze and 20 % of the total annual production (3.65 million tonnes) is supplied by the quarries located in Hereke. The commercial crushed rock aggregate is totally supplied from the limestone and dolomite type carbonate rocks in the northern Kocaeli region. Defining the suitability of potential crushed rock aggregate resource areas was achieved by using GIS methods. First, an aggregate bedrock potential map was developed by using the geological map of the area and categorized as high, moderate and low bedrock potential areas. The high potential areas, which comprised almost 25 % of the northern Kocaeli region, contain carbonate rocks with varying physical, chemical and engineering properties. Secondly, the suitability of the bedrock potential areas was checked by considering the land-use, distance to the county centres and distance to major roads and highways layers in the weighted overlay function of the GIS. The resulting final map contained not suitable, low suitability and suitable areas for crushed rock aggregate. The suitable areas were grouped into three zones according to their geographic distributions. Further, the most promising crushed rock aggregate areas were defined based on the previous field work and surveys in the suitable areas.     

Reusable water oxidation catalyst with dual active center for enhanced water oxidation: Iridium oxide nanoparticles immobilized on monodisperse-porous Mn5O8 microspheres

A reusable catalyst with dual active center for chemical water oxidation is synthesized for the first time by immobilization of iridium oxide nanoparticles (IrO₂ NPs) on monodisperse-porous manganese oxide microspheres acting both catalytic active center and support. Individual catalytic activity of manganese oxide microspheres is explained by multiple oxidation states of manganese which are capable of forming oxidative oxygen species. Monodisperse-porous microspheres in the form of Mn₅O₈, MnO₂ and Mn₂O₃ are used for synthesis of different catalysts and the highest activity in water oxidation is observed with the catalyst synthesized using Mn₅O₈ microspheres. The catalytic activity is correlated with the total Mn(II) and Mn(III) percentage of manganese oxide type selected for composite catalyst. The oxygen evolution up to 244 μmol is achieved in 30 min with the catalyst synthesized using Mn₅O₈ microspheres. Maximum TON and TOF numbers are obtained as 298 and 557 h^?1 with excellent reusability.     

Uncertainty Analysis of Four-Terminal-Pair Capacitance Characterization up 30 MHz

The Impedance Group Laboratories of National Metrology Institute of Turkey previously developed a new method for the characterization of Agilent 16380A-type four-terminal-pair air dielectric capacitance standards ranged from 1 to 1,000 pF up to 30 MHz. This method is based on obtaining all resonance frequencies of standard capacitors using a vector network analyzer in order to calculate inductive residual parameters of the standards. As a continuation of the study, this paper gives a detailed uncertainty analysis for the method.     

Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells

Carbon/poly(3,4‐ethylene dioxythiophene) (C/PEDOT) composites are synthesized by in situ chemical oxidative polymerization of EDOT monomer on carbon black in order to decrease carbon corrosion that occurred in carbon‐supported catalysts used in proton exchange membrane fuel cell. The effects of different dopants including polystyrene sulfonic acid, p‐toluenesulfonic acid and camphorsulfonic acid with the addition of ethylene glycol or dimethyl sulfoxide on the properties of the composites are investigated. The synthesized composites are characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, surface area analysis and scanning electron microscope. Electrical conductivity is determined by using the four‐point probe technique. Electrochemical oxidation characteristics of the synthesized C/PEDOT composites are investigated by cyclic voltammetry by applying 1.2 V for 24 h. The composite prepared at 25 °C with p‐toluenesulfonic acid and ethylene glycol shows the best carbon corrosion resistance. Platinum‐supported catalyst by using this composite was prepared using microwave irradiation technique, and it was seen that the prepared catalyst did not significantly lose its hydrogen oxidation and oxygen reduction reaction activities after electrochemical oxidation. Copyright © 2013 John Wiley & Sons, Ltd.     

Polystyrene Containing Carbinolamine/Azomethine Potentially Useful as Antimicrobial Agent: Synthesis and Biological Evaluation

An investigation of antimicrobial properties of 12 novel modified polymer derived from the condensation reaction of (aminomethyl)polystyrene and four substitute salicylaldehyde (2-hydroxy benzaldehyde, 5-fluoro-2 hydroxy benzaldehyde, 5-fluoro-3-chloro-salicylaldehyde and 5-fluoro-3-methyl-salicylaldehyde) has been carried out and Cr(III) and Ni(II) complexes have been prepared. Modified polymers were characterized by magnetic susceptibility, elemental analyses, and spectral studies. The ¹H NMR and ¹³C NMR spectra analysis of the polymeric carbinolamine/azomethine were determined. In addition, surface morphology and composition were determined by SEM/EDX. Thermo gravimetric analyses of polymers were carried out in nitrogen atmosphere. Antibacterial activities of the polymers attached carbinolamine/azomethine and their complexes were studied by the well-diffusion method against Listeria monocytogenes 4b, Staphylococcus aureus, Escherichia coli, Salmonella typhi H, Brucella abortus, Staphylococcus epidermis sp., Micrococcus luteus, Shigella dysenteria type 10, Bacillus cereus, Pseudomonas putida and antifungal activity against Candida albicans.