The best screw shape for fine zinc oxide particles feeding

One of the most important requirements of particles feeding is a very homogeneous mass flow of fine particles. Screw feeders are among equipment used to feed particles in many industries. In this study, the performance of four single screw feeders with different pitch and blade shape screws has been studied experimentally for steady and stable feeding of fine zinc oxide particles at flow rates corresponding to laboratory scale range (under 10 g/min). The following results were obtained from this investigation: (I) the sticking problem of fine particles in angular pitch screw was solved by changing the pitch shape to circular; (II) the distribution of the fluctuations and their intensity in mass flow rates also lessen by using the circular pitch and a thin blade screw in place of the circular pitch and a thick blade screw. Also for both feeders, the feeding was often interrupted in low flow rates, but it will be disappeared by increasing the flow rate. Furthermore, the results of experiments show that the performance of the circular pitch and a thin blade screw feeder was better than other screw feeders and able to both swirl and mix the particles with different characteristics and reduce the mean aggregate size of the particle size distribution (PSD) when transmitting the zinc oxide particles.     

Origins and minimization of intermodulation distortion in a pseudo-differential CMOS beamforming receiver

Analog Integrated Circuits and Signal Processing - This paper studies how nonlinear distortion is generated in the combination of an inverter-based low-noise amplifier and a passive mixer. The...     

Energy efficiency optimization for device‐to‐device communication underlaying cellular networks in millimeter‐wave

This paper studies energy efficiency maximization in device‐to‐device (D2D) communications underlaying cellular networks in millimeter‐wave (mm‐wave) band. A stochastic geometry framework has been used to extract the results. First, cellular and D2D users are modeled by independent homogeneous Poisson point process; then, exact expressions for successful transmission probability of D2D and cellular users have been derived. Furthermore, the average sum rate and energy efficiency for a typical D2D scenario have been presented. An optimization problem subject to transmission power and quality of service constraints for both cellular and D2D users has been defined, and energy efficiency of D2D communication is maximized. Simulation results reveal that by working in millimeter‐wave, significant energy efficiency improvement can be attained, e.g., 20% energy efficiency improvement compared with Rayleigh distribution in the practical scenarios by considering circuit power. Finally, to verify our analytical expressions, the simulation studies are carried out, and the excellent agreements have been achieved.     

Optimal distribution function determination for plus fraction splitting

Reservoir fluid modelling is one of the most important steps in reservoir simulation and modelling of flow lines as well as surface facilities. One of the most uncertain parameters of the reservoir fluids is the plus fraction. An accurate and consistent splitting scheme can reduce this uncertainty and as a result, enhance the modelling of reservoir fluids. The existing schemes for splitting plus fractions are all based on assuming a specific mole fraction‐molecular weight distribution with predefined constant values that may yield inaccurate and inconsistent results. In this study, an optimization‐based algorithm was developed to determine the aforementioned controlling parameters of the plus fraction distribution function, enforcing the relationship between specific gravity and molecular weight of the single carbon numbers (SCNs). The introduced optimization‐based splitting technique was applied to different samples, covering a wide range of reservoir fluids, including gas condensates, volatile oils, black oils, and heavy oils. The results showed that the proposed technique yielded a more consistent molecular weight‐mole fraction distribution concerning the experimental extended analysis of plus fractions, yielding an average relative error of 25.8 % compared to 76, 33.6, and 45.9 % for the Katz, Ahmed, and Whitson methods, respectively. It was also shown that the proposed method results in more accurate and more consistent phase behaviour predictions than the existing methods concerning the experimental data. Furthermore, the results showed that the introduced optimization‐based method yields monotonic split samples regarding specific gravity and molecular weight, while the conventional techniques do not guarantee to preserve the monotonicity.     

A new mathematical solution for predicting char activation reactions

The differential conservation equations that describe typical gas-solid reactions, such as activation of coal chars, yield a set of coupled second-order partial differential equations. The solution of these coupled equations by exact analytical methods is impossible. In addition, an approximate or exact solution only provides predictions for either reaction- or diffusion-controlling cases. A new mathematical solution, the quantize method (QM), was applied to predict the gasification rates of coal char when both chemical reaction and diffusion through the porous char are present. Carbon conversion rates predicted by the QM were in closer agreement with the experimental data than those predicted by the random pore model and the simple particle model.     

Investigation of the mechanical properties of a photocatalytic pseudo‐paint

Photocatalytic oxidative paints (e.g., a paint containing nano‐TiO₂) are used to break down volatile organic compounds to CO₂ by photooxidation reactions. In this research, a photocatalytic oxidative pseudo‐paint was made with acrylic–styrene copolymer latex, TiO₂ pigment, calcium carbonate extender, and TiO₂ nanoparticles as a photocatalyst. To investigate the effects of the pigment, extender, and nanoparticles on the mechanical properties of the samples and their relationship to their photocatalytic activity, different contents of the particles were dispersed in the paint formulation. The tensile strengths (TSs) of the samples were measured as the mechanical properties. The samples were characterized by scanning electron microscopy analysis. We found that up to 3% nano‐TiO₂ enhanced the mechanical properties of the pigmented resin, whereas beyond this, TS decreased. In samples containing 3% nanoparticles, the incorporation of 15% TiO₂ pigment caused optimized mechanical properties, and beyond that, TS decreased because of particle agglomeration. In the absence of nanoparticles, the samples showed improvements in the mechanical properties with up to a 40% loading of pigment. The results reveal that the samples containing nano‐TiO₂ and pigment showed the same trend for the mechanical and photocatalytic properties before the critical pigment volume concentration (CPVC). However, when the extender was incorporated or TiO₂ particles were loaded beyond CPVC, the mechanical and photocatalytic properties correlation was compromised, and they were not directly correlated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42885.     

Statistical analysis of coherent ultrashort light pulse CDMA with multiple optical amplifiers using additive noise model

This paper describes a study of the performance of various configurations for placing multiple optical amplifiers in a typical coherent ultrashort light pulse code-division multiple access (CULP-CDMA) communication system using the additive noise model. For this study, a comprehensive performance analysis was developed that takes into account multiple-access noise, noise due to optical amplifiers, and thermal noise using the saddle-point approximation technique. Prior to obtaining the overall system performance, the input/output statistical models for different elements of the system such as encoders/decoders, star coupler, and optical amplifiers were obtained. Performance comparisons between an ideal and lossless quantum-limited case and a typical CULP-CDMA with various losses exhibit more than 30 dB more power requirement to obtain the same bit-error rate (BER). Considering the saturation effect of optical amplifiers, this paper discusses an algorithm for amplifiers' gain setting in various stages of the network in order to overcome the nonlinear effects on signal modulation in optical amplifiers. Finally, using this algorithm, various configurations of multiple optical amplifiers in CULP-CDMA are discussed and the rules for the required optimum number of amplifiers are shown with their corresponding optimum locations to be implemented along the CULP-CDMA system.     

Analog and digital image enhancement using fuzzy expert systems

 Image enhancement is a field that is being used in various areas and disciplines. Advances in computers, microcontrollers and DSP boards have opened new horizons to digital image processing, and have opened many avenues to the design and implementation of new innovative techniques. This paper compares image enhancement via the modification of the probability density function of the gray levels with the new techniques that involves the use of knowledge-base (fuzzy expert) systems that are capable of mimicking the behavior of a human expert. A fuzzy expert system based software for image enhancement, called SmartPhotoLab has been introduced for the above purpose. Present address: A. El-Osery Dept. of Electrical Engineering, New Mexico Tech, Workman Center Rm. 247 801 Leroy place, Socorro, NM 87801 e-mail: elosery@ee.nmt.edu. This work was supported in parts by NASA grants no. NAG2–1196 and 2-1480.     

A Selective,Hydrogel-Based Prodrug Delivery System Efficiently Activates a Suicide Gene to Remove Undifferentiated Human Stem Cells Within Neural Grafts

The directed differentiation of human pluripotent stem cells (hPSCs) into defined populations has advanced regenerative medicine, especially for Parkinson's disease where clinical trials are underway. Despite this, tumorigenic risks associated with incompletely patterned and/or quiescent proliferative cells within grafts remain. Addressing this, donor stem cells carrying the suicide gene, thymidine kinase (activated by the prodrug ganciclovir, GCV), are employed to enable the programmed ablation of proliferative cells within neural grafts. However, coinciding the short half-life of GCV with the short S-phase of neural progenitors is a key challenge. To overcome this, a smart hydrogel delivery matrix is fabricatedto prolong GCV presentation. Following matrix embedment, GCV retains its functionality, demonstrated by ablation of hPSCs and proliferating neural progenitors in vitro. A prolonged GCV release is measured by mass spectrometry following the injection of a GCV-functionalized hydrogel into mouse brains. Compared to suboptimal, daily systemic GCV injections, the intracerebral delivery of the functionalized hydrogel, as a “one-off treatment”, reduce proliferative cells in both hPSC-derived teratomas and neural grafts, without affecting the graft's functional unit (i.e., neurons). It is demonstrated that a functionalized biomaterial can enhance prodrug delivery and address safety concerns associated with the use of hPSCs for brain repair.