Production of stable amorphous form by means of spray drying

Spray drying is a very useful method for manufacturing of amorphous solid materials. This is mainly due to the possibility of fast solvent evaporation that leads to a rapid transformation of solution to a solid state. Besides evaporation kinetics, there are various process parameters that influence physical and chemical characteristics of such obtained material. The possibility of obtaining a stable amorphous structure of the active pharmaceutical ingredient in a spray dryer was examined. A solution of the hydrochloride crystalline structure of the active pharmaceutical ingredient in a mixture of water and acetonitrile was dried at different temperatures and flowrates of nitrogen used for atomization, as well as the flowrates of the solution. The influence of the process conditions on the properties of the product was analyzed. The final dried products were characterized and identified with a variety of analytical and physical methods. The results showed that a stable amorphous structure of the high purity active pharmaceutical ingredient is obtained, and that the optimal conditions of the process are defined. The amorphous structure is stable at temperatures below 200°C when it is transformed into a new crystal structure. Conditions of high relative air humidity lead to partial transformation.     

On globally stable adaptive control providing l 1 tracking performance for linear discrete-time systems

Existing adaptive control algorithms at best guarantee that the tracking error is a l ₂ sequence. This paper presents globally stable adaptive control algorithms for linear discrete-time systems providing l ₁ tracking performance. Two algorithms with different degree of complexity are proposed, one for the case of known control directions, and a separate algorithm for the case of unknown control directions. It is demonstrated that in both cases the tracking error is l ₁ sequence, while the input and output signals are uniformly bounded.     

BPC – A binary priority countdown protocol

In modern wireless ad hoc networks, with a high speed PHY, every collision means a significant loss of useful bandwidth. In the last few years different binary contention protocols have been introduced to address this problem. In this work we propose a novel binary contention protocol called binary priority countdown (BPC) protocol, whose goal is to reduce collisions as well as contention time. BPC uses a new priority countdown mechanism which exploits the efficiency of binary countdown, but the priority countdown process is not constrained to a single binary countdown round. This way, the priority space is not defined by the length of binary countdown round, like in other binary countdown protocols proposed in the literature, and arbitrary medium access priorities can be decremented through multiple binary countdown rounds if necessary. The ability of a new priority countdown mechanism to count down any priority number without changing the length of a binary countdown round, allows independent management of priority space. This “independence” of priority space introduces new optimization and adaptation possibilities. Collision memory effect is recognized and described. BPC protocol reveals connection between unary, binary and digit contention protocols. All three groups of protocols can now be seen as members of the same class of contention algorithms. Preliminary simulation results are shown.     

E-business technologies for xRM: Exploring the readiness of public broadcasters

This paper examines the possibilities of enhancing relationship management between public service broadcasters and their stakeholders by harnessing the potential of newest e-business technologies and concepts, such as: social media, digital and interactive TV, and mobile computing. In order to facilitate adoption of relationship management strategy, a framework for leveraging relationship management is proposed. Evaluation was performed within the e-business system of a public broadcaster. This empirical study explored the readiness and expected benefits of relationship management implementation. The research results have indicated that a public broadcaster could achieve a higher level of social responsibility, improve business sustainability, and empower communication and collaboration with all the stakeholders by using emerging technologies for relationship management activities.     

Prediction of traditionally utilised wheat dough technological quality parameters from Mixolab values: development and evaluation of regression models

The research was conducted with the aim to investigate the possibility of Farinograph, Extensograph and Amylograph values prediction with linear and/or multiple Mixolab regression models. In total, 163 flour samples were divided based on Machalanobis distances into three sets: prediction, validation and external sample set. Determination coefficients ranged from 0.145 to 0.640 for linear regression models and from 0.279 to 0.739 for multiple regression models. Internal and external validation of developed regression models was conducted. Testing of developed models resulted in a high share of samples for which predicted values were out of the ranges of method official reproducibility and a high share of samples for which predicted values were out of the quality level range obtained by analytical measurement. It was concluded that it is impossible to develop applicable regression models for prediction of Farinograph, Extensograph and Amylograph parameters on the basis of Mixolab values from standard protocol.     

Effect of supercritical CO2 extraction process parameters on oil yield and pigment content from by‐product hemp cake

This research gives an insight into the possibility of exploiting the one of the food industry's by‐products – pressed hemp cake. The complete recovery of oil from pressed hemp cake was achieved. Residual oil that remained in cake after pressing was extracted with supercritical CO₂ by applying different process parameters. Optimal extraction conditions were determined using response surface methodology. Total pigment contents of the oils obtained were determined. Extraction pressure had the most significant influence on yield and pigment content of extracted hemp cake oil. Depending on the pressure, the chlorophyll a content ranged from 101.11 to 378.28 mg kg^?1 and chlorophyll b from 65.14 to 189.78 mg kg^?1, while total carotene content was in the range from 33.58 to 132.67 mg kg^?1. The remaining oil in pressed hemp cake after supercritical CO₂ extraction was determined to be 0.56 ± 0.08% and the defatted cake was rich in proteins and fibre.     

Visualization of the Centre of Projection Geometrical Locus in a Single Image

Single view reconstruction (SVR) is an important approach for 3D shape recovery since many non‐existing buildings and scenes are captured in a single image. Historical photographs are often the most precise source for virtual reconstruction of a damaged cultural heritage. In semi‐automated techniques, that are mainly used under practical situations, the user is the one who recognizes and selects constraints to be used. Hence, the veridicality and the accuracy of the final model partially rely on man‐based decisions. We noticed that users, especially non‐expert users such as cultural heritage professionals, usually do not fully understand the SVR process, which is why they have trouble in decision making while modelling. That often fundamentally affects the quality of the final 3D models. Considering the importance of human performance in SVR approaches, in this paper we offer a solution that can be used to reduce the amount of user errors. Specifically, we address the problem of locating the centre of projection (CP). We introduce a tool set for 3D visualization of the CP's geometrical loci that provides the user with a clear idea of how the CP's location is determined. Thanks to this type of visualization, the user becomes aware of the following: (1) the constraint relevant for CP location, (2) the image suitable for SVR, (3) more constraints for CP location required, (4) which constraints should be used for the best match, (5) will additional constraints create a useful redundancy. In order to test our approach and the assumptions it relies on, we compared the amount of user made errors in the standard approaches with the one in which additional visualization is provided.     

Numerical modelling of calcination reaction mechanism for cement production

Calcination is a thermo-chemical process, widely used in the cement industry, where limestone is converted by thermal decomposition into lime CaO and carbon dioxide CO₂. The focus of this paper is on the implementation and validation of the endothermic calcination reaction mechanism of limestone in a commercial finite volume based CFD code. This code is used to simulate the turbulent flow field, the temperature field, concentrations of the reactants and products, as well as the interaction of particles with the gas phase, by solving the mathematical equations, which govern these processes. For calcination, the effects of temperature, decomposition pressure, diffusion and pore efficiency were taken into account. A simple three-dimensional geometry of a pipe reactor was used for numerical simulations. To verify the accuracy of the modelling approach, the numerical predictions were compared with experimental data, yielding satisfying results and proper trends of physical parameters influencing the process.