Conversion of aqueous extracts from thermochemical treatment of bagasse into functional emulsifiers

Synthetic emulsifiers in food industries are being replaced with a customer-friendly food ingredient that is derived from biomass using sustainable green technologies. After hydrothermal liquefaction treatment, raw bagasse (21%), pith (26%), and rind portions (25%) were obtained with reduced ash contents. As aqueous extracts, with oligosaccharides and lignin residues, it was used in the preparation of oil-in-water emulsions with 5% soybean oil. Results showed that the emulsions stabilised the oil droplets with particle size between 11 and 17 µm by steric repulsion with raw bagasse-stabilised emulsion showing a better stability at 25 °C (31 days). It was demonstrated that raw bagasse extracts, without alteration, maybe a potential unconventional source for food-grade emulsifiers by integrating a versatile thermochemical conversion of waste without the use of chemicals.     

Metagenomic analysis revealed the individualized shift in ileal microbiome of neonatal calves in response to delaying the first colostrum feeding

The aim of this study was to explore the effect of colostrum feeding time on the ileal microbiome of neonatal calves. In this study, 22 male Holstein calves were randomly assigned to different colostrum feeding time treatments: after birth (at 45 min, n = 7); at 6 h after birth (n = 8); and at 12 h after birth (TRT12h; n = 7). At 51 h after birth, calves were killed and ileum digesta was collected for microbiome analysis using shotgun metagenomic sequencing. Bacteria, archaea, eukaryotes, and viruses were identified from the ileum microbiome. For the bacteriome, Firmicutes and Proteobacteria were the predominant phyla, and Escherichia, Streptococcus, Lactobacillus were the 3 most abundant genera. For the archaeal community, Euryarchaeota and Crenarchaeota were the 2 major phyla, and Methanosarcina, Methanobrevibacter, and Methanocorpusculum were the 3 most abundant genera. In total, 116 Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were identified from the ileal microbiome, with “biosynthesis of vancomycin group antibiotics,” “biosynthesis of ansamycins,” “valine, leucine, and isoleucine biosynthesis,” “ribosome,” and “d-alanine metabolism” as the top 5 functions. When the ileal microbiomes were compared among the 3 treatments, the relative abundance of Enterococcus was higher in TRT12h calves, suggesting that calves may have a higher abundance of opportunistic pathogens when the feeding of colostrum is delayed for 12 h. Moreover, among all KEGG pathways, the enriched “taurine and hypotaurine metabolism” (KO00430) pathway was identified in the ileal microbiome of TRT12h calves; however, future studies are needed to understand the effect on the host. Additionally, 2 distinct ileal microbial profiles were identified across all samples, indicating that that host factors may play a significant role in driving varied microbiome changes in response to colostrum feeding time. Whether such microbiome shifts affect long-term gut function and calf performance warrants future studies.     

Effect of Pasteurization and Retort Processing on Spectral Characteristics,Morphological, Thermal,Physico‐Mechanical,Barrier and Optical Properties of Nylon‐Based Food Packaging Materials

The effect of pasteurization and retort processing on spectral, morphological, thermal, physico‐mechanical, barrier and optical properties of three different packaging materials viz., PP/N6/PP, PET/N6/cPP and SiO_x‐PET/N6/cPP were studied. These packaging materials were packed with distilled water, which acted as a food simulant. Subsequently, these pouches were subjected to different thermal processing conditions such as pasteurization and retort processing. Both the processing techniques found to have retained the mechanical properties of all packaging materials. Water vapour transmission rate (WVTR) and oxygen transmission rate (OTR) of nylon‐based combinations were increased after processing. Gloss found to decrease invariably irrespective of the material and increases with the severity of the treatment. XRD diffractogram shows changes in crystal structure as a result of thermal processing, and SEM analysis shows the crystal fragmentation. Absorption of water by the amide group of nylon 6 was observed, which could be a reason for the increase in OTR and WVTR. Copyright © 2014 John Wiley & Sons, Ltd.     

Stress and strain distribution in demineralized enamel: A micro‐CT based finite element study

Physiological oral mechanical forces may play a role on the progression of enamel carious lesions to cavitation. Thus, the aim of this study was to describe, by 3D finite element analysis, stress, and strain patterns in sound and carious enamel after a simulated occlusal load. Micro‐CT based models were created and meshed with tetrahedral elements (based on an extracted third molar), namely: a sound (ST) and a carious tooth (CT). For the CT, enamel material properties were assigned according to the micro‐CT gray values. Below the threshold corresponding to the enamel lesion (2.5 g/cm³) lower and isotropic elastic modulus was assigned (E = 18 GPa against E₁ = 80 GPa, E₂ = E₃ = 20 GPa for sound enamel). Both models were imported into a FE solver where boundary conditions were assigned and a pressure load (500 MPa) was applied at the occlusal surface. A linear static analysis was performed, considering anisotropy in sound enamel. ST showed a more efficient transfer of maximum principal stress from enamel to the dentin layer, while for the CT, enamel layer was subjected to higher and concentrated loads. Maximum principal strain distributions were seen at the carious enamel surface, especially at the central fossa, correlating to the enamel cavity seen at the original micro‐CT model. It is possible to conclude that demineralized enamel compromises appropriate stress transfer from enamel to dentin, contributing to the odds of fracture and cavitation. Enamel fracture over a dentin lesion may happen as one of the normal pathways to caries progression and may act as a confounding factor during clinical diagnostic decisions. Microsc. Res. Tech. 78:865–872, 2015. © 2015 Wiley Periodicals, Inc.     

Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Individual cell lag time distributions of Cronobacter (Enterobacter sakazakii) and impact of pooling samples on its detection in powdered infant formula

Cells of six strains of Cronobacter were subjected to dry stress and stored for 2.5 months at ambient temperature. The individual cell lag time distributions of recovered cells were characterized at 25 °C and 37 °C in non-selective broth. The individual cell lag times were deduced from the times taken by cultures from individual cells to reach an optical density threshold. In parallel, growth curves for each strain at high contamination levels were determined in the same growth conditions. In general, the extreme value type II distribution with a shape parameter fixed to 5 (EVIIb) was the most effective at describing the 12 observed distributions of individual cell lag times. Recently, a model for characterizing individual cell lag time distribution from population growth parameters was developed for other food-borne pathogenic bacteria such as Listeria monocytogenes. We confirmed this model’s applicability to Cronobacter by comparing the mean and the standard deviation of individual cell lag times to populational lag times observed with high initial concentration experiments. We also validated the model in realistic conditions by studying growth in powdered infant formula decimally diluted in Buffered Peptone Water, which represents the first enrichment step of the standard detection method for Cronobacter. Individual lag times and the pooling of samples significantly affect detection performances.     

Thermovinification of grapes from the Cabernet Sauvignon and Pinot Noir varieties using immobilized yeasts

This study examined the thermovinification technique using yeasts immobilized on calcium alginate for microvinification of the Cabernet Sauvignon and Pinot Noir grape varieties grown in Diamantina, Minas Gerais, Brazil. The wines obtained by thermovinification were characterized by their chemical and sensory aspects. The varietal wines from Cabernet Sauvignon and Pinot Noir had an alcohol content of 9.3 and 10.9 % (v/v), respectively. The total acidity, volatile acidity and the alcohol/reduced dry extract ratio were consistent with the Brazilian standards established for identity and quality of wines. There was a significant reduction in the levels of anthocyanins, flavonoids and total phenolic compounds after aging in the bottle. The sensory evaluation presented an acceptability exceeding 60 % for both wines.     

Physical examination of arteriovenous fistula: The influence of professional experience in the detection of complications

Vascular access is one of the leading causes of mobilization of financial resources in health systems for people with chronic kidney disease on hemodialysis. Physical examination of the arteriovenous fistula (AVF) has demonstrated its effectiveness in identifying complications. We decided to evaluate the influence of nurses' professional experience in the detection of complications of the AVF (venous stenosis and steal syndrome). The study took place in eight hemodialysis centers between May and September of 2011 in the north of Portugal. Sample was constituted by registered nurses. The nurses involved in the experiment were divided in two groups: those who had more than 5 years of experience and those who had less than 5 years of experience. Ninety‐two nurses participated in the study: 34 nurses had less than 5 years of professional experience and 58 had more than 5 years of professional experience. In the practices considered by nurses in the detection of venous stenosis, there were no differences observed between the groups (P > 0.05). In steal syndrome, there were no differences observed between the groups in the practices of the nurses in the detection of this complication of the AVF (P > 0.05). We concluded that professional experience does not influence the detection of venous stenosis and steal syndrome.