基于针织面料特性的针织服装缝制工艺研究

基于针织面料特性研究了针织服装缝制工艺过程中缝线、缝迹、缝针的选择,并分析了针织服装缝制工艺中的常见故障,最后提出了针织服装缝制工艺方面未来的发展方向。     

Acidified sodium chlorite optimisation assessment to improve quality of fresh-cut tatsoi baby leaves

BACKGROUND: The fresh‐cut industry commonly uses sodium hypochlorite (NaClO) for disinfection. However, there are certain problems related to its use, and acidified sodium chlorite (ASC) could be an alternative sanitiser to replace it. There is limited research evaluating the effect of ASC on the overall quality of fresh‐cut produce, especially sensory quality. In this study the decontamination efficacy and quality attribute effects of ASC on fresh‐cut tatsoi after application and during storage were investigated. RESULTS: Tatsoi baby leaves were minimally processed at 8 °C and stored under passive modified atmosphere packaging for up to 11 days at 5 and 10 °C. Low to moderate doses of ASC (100–500 mg L^?1) showed an initial antimicrobial efficacy on natural microflora and Escherichia coli as effective as that of NaClO. Regarding contact time, ASC was effective in reducting the E. coli population during the first 30 s of washing, and an increase in contact time did not improve the antimicrobial effect. Sensory quality attributes were well kept for up to 11 days at 5 °C but for only 5 days at the abusive temperature of 10 °C. CONCLUSION: ASC provides an alternative sanitising technique to NaClO for maintaining the quality and safety of fresh‐cut tatsoi baby leaves for up to 11 days at 5 °C. Copyright © 2011 Society of Chemical Industry     

FERC regulation—electricity: FERC and NERC speed processing of electric reliability violations

The North American Electric Reliability Corporation (NERC) is the organization responsible for ensuring the reliability of the bulk-power system (BPS) in the United States, Mexico, and Canada. NERC recently received approval from the Federal Energy Regulatory Commission (FERC) to streamline the process for tracking and reporting violations of electric reliability standards. On March 15, FERC issued an order conditionally approving the proposed “Find, Fix, Track, and Report” (FFTR) process to expedite the enforcement process for violations of NERC Reliability Standards that pose lesser risk to the BPS. 1 In its approval of NERC's new process, however, FERC included several conditions that narrow the range of potential violations eligible for the expedited process. FERC Chairman Jon Wellinghoff hailed the new process as “a major change in how [FERC] will enforce compliance with the Reliability Standards going forward.” 2     

Assessing the performance of methods to detect and quantify African dust in airborne particulates

African dust (AD) contributions to particulate matter (PM) levels may be reported by Member States to the European Commission during justification of exceedances of the daily limit value (DLV). However, the detection and subsequent quantification of the AD contribution to PM levels is complex, and only two measurement-based methods are available in the literature: the Spanish-Portuguese reference method (SPR), and the Tel Aviv University method (TAU). In the present study, both methods were assessed. The SPR method was more conservative in the detection of episodes (71 days identified as AD by SPR, vs 81 by TAU), as it is less affected by interferences with local dust sources. The mean annual contribution of AD was lower with the TAU method than with SPR (2.7 vs 3.5 ± 1.5 μg/m(3)). The SPR and TAU AD time series were correlated with daily aluminum levels (a known tracer of AD), as well as with an AD source identified by the Positive Matrix Factorization (PMF) receptor model. Higher r(2) values were obtained with the SPR method than with TAU in both cases (r(2) = 0.72 vs 0.56, y = 0.05x vs y = 0.06x with aluminum levels; r(2)=0.79 vs 0.43, y = 0.8x vs y = 0.4x with the PMF source). We conclude that the SPR method is more adequate from an EU policy perspective (justification of DLV exceedances) due to the fact that it is more conservative than the TAU method. Based on our results, the TAU method requires adaptation of the thresholds in the algorithm to refine detection of low-impact episodes and avoid misclassification of local events as AD.     

The sustainability indicators of power production systems

One of the most important elements of economical and social development is to provide uninterrupted electric energy to consumers. The increasing world population and technological developments rapidly increase the demand on electric energy. In order to meet the increasing demand for sustainable development, it is necessary to use the consumable resources of the world in the most productive manner and minimum level and to keep its negative effects on human health and environment in the lowest level as much as possible. In this study, alignment of hydrogen fuel cells, hydroelectric, wind, solar and geothermal sourced electric energy systems, in addition to fossil fueled coal, natural gas and nuclear power plants, in respect to sustainability parameters such as CO₂ emission, land use, energy output, fresh water consumption and environmental and social effects is researched. Consequently, it has been determined that the wind and nuclear energy power plants have the highest sustainability indicators. The fuel cells that use hydrogen obtained by using coal and natural gas are determined as the most disadvantageous transformation technologies in respect to sustainability. This study contains an alignment related to today's technologies. Using of renewable energy resources especially in production of hydrogen, output increases to be ensured with nanotechnology applications in photovoltaic systems may change this alignment.     

Analysis of wind climate and wind energy potential of regions in Turkey

Investments in wind plants have increased rapidly as a result of changes to legal regulations in Turkey over the last five years. This has also led to an increase in the number of wind potential analyses in various regions of the country. This study analyzes the wind climate features of three regions in Turkey and their energy potential. In order to determine the features of wind in these regions, a five-layer Sugeno-type ANFIS model established under the MATLAB-Simulink software was used and the relationship between wind speed and other climate variables determined. In the second phase, WASP software was used to complete the wind energy potential analyses using wind speed data. The final phase includes calculations of the amount of electricity to be obtained technically and capacity usage rates of the installed turbines if wind farms are established in the selected areas. The comparative tables and graphics of the said areas were obtained. In conclusion, the selected areas are well located for the installation of parallel-connected wind plants to the national network in terms of the reliability of wind, the dispersion of wind potential and capacity usage rates.     

Polyols and chocolate technology: recent developments and advances

Reducing the sugar level in chocolate and developing low-calorie products are important for meeting consumer expectations, supporting public health and adapting to current consumption trends. However, the identification of bulking agents to be used for this aim is a critical factor. The most commonly used sugar alternatives for this aim are polyols. In this study, recent advances and developments for using possibilities of polyols in chocolate technology were discussed and future perspectives were highlighted. Partially and/or complete replacing of sugar with polyols can provide a low-calorie product. In addition, the use of mixtures consisting of more than one polyol is an approach that can be used in chocolate sugar substitution. Optimization of refining, conching and tempering processes by considering polyol type and content may contribute to the development of chocolate with improved quality properties and shelf life. However, polyol and bioactive compounds interactions and possible effects on bioaccesibility, bioavalibility and stability of these compounds in chocolate composition and pre- and post-digestion periods should be deeply investigated. In addition, the conching methods and conditions used is another factor to be considered in the use of polyols.