A micro-electrode study of the nitrate effect on pitting of stainless steels

Stainless steel micro-electrodes have been used to measure the effect of nitrate on pitting dissolution in sodium chloride solutions. No inhibiting effect of nitrate on active (film-free) dissolution is observed, even when the metal salt solution in the pit is supersaturated. However, nitrate causes abrupt passivation during diffusion-controlled dissolution across a salt film formed at higher potentials. The passivation potential of the salt-covered surface is highly reproducible and decreases with increasing ((NO₃⁻/(Cl⁻) ratio. This behaviour is probably related to redox reactions or electrochemical reduction of nitrate within the salt film, coupled with an increase in the pH of the salt environment with potential; a related observation in pure NaCl solutions is that local passivation-reactivation events occur under the salt film above a critical potential.     

Lumbar spine magnetic resonance imaging: comparison between fast spin echo proton density and spin echo T1 axial scans

Spin echo (SE) T1 axial scans are routinely obtained in magnetic resonance imaging of the lumbar spine in many centres. This study directly compared matched SE T1 and fast SE (FSE) proton density (PD) axial scans. Both SE T1 and FSE PD axial scans of the lumbar spine were obtained in 116 consecutive patients. The imaging parameters (field-of-view, slice thickness, interslice gap, number of excitations and matrix size) and scan levels were identical for each pair of sequences. At two selected levels, L4/5 and L5/S1, various structures were independently graded by two observers. In 232 lumbar levels analysed, the bone marrow, epidural fat, disc, extradural nerve root and facet joint were equally well seen on both sequences by both observers (combined mean grades of 2.93-2.99). The thecal sac was marginally better depicted on FSE PD than on SE T1 images, with mean grades of 2.96 and 2.88, respectively. The psoas muscle was adequately visualized for diagnostic purposes on both sequences (mean grades of 2.30-2.32). The cauda equina were better seen on FSE PD (mean grade 1.92) than on SE T1 (mean grade 1.00) images. In conclusion, FSE PD scans are comparable to and may potentially replace SE T1 axial MR scans of the lumbar spine.     

Lung deposition of fenoterol and flunisolide delivered using a novel device for inhaled medicines: comparison of RESPIMAT with conventional metered-dose inhalers with and without spacer devices

STUDY OBJECTIVES: To compare lung deposition of fenoterol or flunisolide administered from a novel, multidose inhalation device delivering liquid droplets (RESPIMAT; Boehringer Ingelheim Ltd; Bracknell, UK) or from conventional metered-dose inhalers (MDIs) with and without spacers. DESIGN: Two randomized, three-way crossover studies. SETTING: Clinical research laboratory. PARTICIPANTS: Healthy, nonsmoking volunteers. INTERVENTIONS: In one study, radiolabeled aerosols of fenoterol from the RESPIMAT device and from a conventional MDI with or without an Aerochamber spacer (Trudell Medical; London, Ontario Canada). In the second study, radiolabeled aerosols of flunisolide from a RESPIMAT device, from a RESPIMAT device modified by inclusion of a baffle/impactor in the mouthpiece, and from a conventional MDI with an Inhacort spacer (Boehringer Ingelheim; Ingelheim, Germany). MEASUREMENTS AND RESULTS: Assessment of the deposition of fenoterol or flunisolide in the lung and oropharynx using gamma scintigraphy. Safety was assessed based on reported adverse effects and spirometry (FEV1, FVC, and peak expiratory flow rate) to detect any paradoxical bronchoconstriction. The RESPIMAT device delivered significantly more fenoterol to the lungs than either an MDI alone or an MDI with Aerochamber (39.2% vs 11.0% and 9.9% of metered dose, respectively; p<0.01). Oropharyngeal deposition of fenoterol from the new device was lower than that from the MDI (37.1% vs 71.7%, respectively; p<0.01). The RESPIMAT device deposited significantly more flunisolide in the lungs compared with MDI plus spacer (44.6% vs 26.4%, respectively; p<0.01), while resulting in similar oropharyngeal deposition (26.2% vs 31.2%, respectively). Introduction of a baffle into the RESPIMAT system reduced lung deposition of flunisolide to 29.5%, and oropharyngeal deposition to 7.8% (p<0.01). CONCLUSION: The RESPIMAT device may prove to be an effective alternative to MDIs for the administration of inhaled bronchodilators and corticosteroids. The high lung deposition and low oropharyngeal deposition may lead to improved efficacy and tolerability of inhaled medications, especially corticosteroids.     

Defective transfer RNA-queuine modification in C3H10T1/2 murine fibroblasts transfected with oncogenic ras

tRNA isoacceptors for aspartic acid, asparagine, histidine, and tyrosine are modified in the anticodon wobble position with the deazaguanine analogue queuine. Queuine modification is defective in many tumors and transformed cell lines, and the extent of hypomodification correlates with staging and outcome in numerous human tumors. The molecular role of queuine modification in normal cells and the mechanisms of queuine hypomodification in tumors are unknown. We have characterized nontransformed C3H10T1/2 murine fibroblasts (C3H) and their ras-transfected counterparts (RasC4) with respect to the causes and effects of queuine hypomodification. RasC4 cells are hypomodified for queuine compared with C3H cells, despite increase tRNA-guanine ribosyltansferase activity. Excess exogenous queuine can cause repletion of tRNA queuine levels in RasC4 cells. Queuine modification of both C3H and RasC4 cells can be decreased by treatment with 7-methylguanine. This treatment does not affect growth in monolayer culture but enhances anchorage-independent growth of RasC4 cells greatly. These cell lines may be useful systems for the study of queuine function in normal cells and the causes and consequences of hypomodification for queuine in tumors.     

Assessment of uterine arterial notching as a screening test for adverse pregnancy outcome

Recombinant papillomavirus-like particles have recently been shown to be highly effective for the prevention of papillomavirus infections and associated tumors, and a virus-like particle-based vaccine against the most prevalent HPV causing genital infection in humans will be developed in the near future. Another use of these virus-like particles may lie in gene therapy and DNA immunization. We report here that human papillomavirus-like particles composed of the major capsid protein (L1) of HPV-16 are able to package unrelated plasmid DNA in vitro and then to deliver this foreign DNA to eukaryotic cells with the subsequent expression of the encoded gene. The results indicate higher gene transfer than with DNA alone or with liposome. Virus-like particles are a very promising vehicle for delivering genetic material into target cells. Moreover, the preparation of the gene transfer vehicle is relatively easy.     

The Rheology of Wetting By Polymer Melts

Theoretically, the rate of capillary penetration of a polymer melt into a slit, a model for a surface irregularity, has been shown to depend on γcosθ/η) where γ refers to the surface tension of the liquid, η its viscosity and θ a time-dependent contact angle. Analytical expressions relating the depth of penetration with time have been experimentally verified by observations of the penetration of molten polyethylene and poly-(ethylene-vinyl acetate) into aluminum channels. Values of η, calculated from the observed data, agree closely with independent determinations of this material parameter. A theoretical treatment has also been developed which describes the velocity of spreading of a liquid drop over a flat surface. Flow equations for the flow of free films were adapted for this purpose. The spreading velocity is predicted to depend on the product of three factors (1) a scaling factor, (γ/η1R_o), where R_o is the initial radius of curvature, (2) cosθ_∞. (l-cosθ/cosθ_∞) where θ_∞ refers to the equilibrium value of θ, and (3) geometric terms. After demonstrating that a drop of molten polymer may be treated as a spherical cap, the predicted dependence of spreading rate on drop size, cosθ_∞ (nature of the substrate) and the scaling factor was experimentally verified. Some discrepancies noted at long times and high temperatures are discussed.