Performance analysis of cooperative spatial multiplexing networks with AF/DF relaying and linear receiver over Rayleigh fading channels

Cooperative spatial multiplexing (CSM) system has played an important role in wireless networks by offering a substantial improvement in multiplexing gain compared with its cooperative diversity counterpart. However, there is a limited number of research works that consider the performance of CSM systems. As such, in this paper, we have derived exact performance of CSM with amplify‐and‐forward and decode‐and‐forward relays in terms of outage capacity and ergodic capacity. We have shown that CSM systems yield a unity diversity order regardless of the number of antennas at the destination and the number of relays in the networks, which is the direct result of diversity and multiplexing gain trade‐off. Our analytical expressions are corroborated by Monte‐Carlo simulations. Copyright © 2013 John Wiley & Sons, Ltd.     

A computationally efficient superresolution image reconstructionalgorithm

Superresolution reconstruction produces a high-resolution image from a set of low-resolution images. Previous iterative methods for superresolution had not adequately addressed the computational and numerical issues for this ill-conditioned and typically underdetermined large scale problem. We propose efficient block circulant preconditioners for solving the Tikhonov-regularized superresolution problem by the conjugate gradient method. We also extend to underdetermined systems the derivation of the generalized cross-validation method for automatic calculation of regularization parameters. The effectiveness of our preconditioners and regularization techniques is demonstrated with superresolution results for a simulated sequence and a forward looking infrared (FLIR) camera image sequence.     

Intelligible Crosstalk Between Two FDM/FM Carriers Accessing Double Cascaded Nonlinear Amplifiers

A method of evaluating double intelligible crosstalk between two frequency division multiplexed frequency modulated (FDM/FM) carriers accessing the same earth station high-power amplifier (HPA) and satellite transponder traveling wave tube amplifier (TWTA) has been developed. The analysis takes into consideration the AM/AM and AM/PM characteristics of the two cascaded memoryless nonlinear amplifiers, and the amplitude and group delay variations of transmission paths preceding the first nonlinear amplifier and of the path between the two nonlinear amplifiers. Results of the double intelligible crosstalk evaluation show the existence of significant distortion cross terms caused by the two cascaded nonlinearities and filters, in addition to individual distortion terms by each nonlinearity. Specific illustrative examples are discussed, and some practical suggestions are given for controlling crosstalk impairment effects in satellite channels with double cascaded nonlinear amplifiers.     

Gasification kinetics of oil sands coke

Kinetics of steam gasification of delayed and fluid cokes derived from Athabasca bitumen have been studied in 6.35 cm diameter stirred and fixed bed reactors. Experiments were carried out at atmospheric pressure and at temperatures between 800°C and 930°C. The coke particle size ranged from 0.1 to 3.5 mm, and the steam partial pressure was varied from 15.2 to 60.6 kPa. Scanning electron microscopy, surface area analysis, and mercury porosimetry were employed to relate physical structure changes in the solids to experimental kinetic data. Several kinetic models for gasification were tested with the experimental gasification data. Rate expressions are presented for carbon conversion and for the release of sulphur.     

Numerical and experimental analysis of large passivation opening for solder joint reliability improvement of micro SMD packages

In this paper, using a recently developed solder fatigue model for wafer level-chip scale package (WL-CSP), we investigated the improvement on solder joint reliability for a 8-bump micro SMD package by enlarging the passivation layer opening at the solder–die interface. The motivation to enlarge the passivation opening is to reduce the severity of the stress concentration caused by the original design, and also to increase the contact area between the solder bump and aluminum bump pad. It was confirmed in the thermal shock test that with the new design, package fatigue life improved by more than 70%. To numerically predict this improvement represents a unique challenge to the modeling. This is because in order to capture the slightest geometrical difference on the order of a few microns between the two designs, the multiple-layer solder-die interface needs to be modeled using extremely fine mesh, while the overall dimensions of the package and the test board are on the order of millimeters. To bridge this tremendous gap in geometry, a single finite element model that incorporates all necessary geometrical details is deemed computationally prohibitive and impractical. In this paper, we applied a global–local modeling scheme that was also suggested by others [1, 2 and 3]. The global model contains the complete package with much simplified solder–die interface whereas the local model includes only one solder joint, but with detailed solder–die interface. Unlike most global–local models proposed by others, we included time-independent plasticity and temperature-dependent materials in the global model. This greatly improved model correlation accuracy with only moderate increase in run time. Energy-based solder fatigue model was used to correlate the inelastic strain energy with the package fatigue life. In an earlier study [4], we have found that Darveaux’s equations tended to be conservative when applied to the micro SMD, and hence new correlations based on curve-fitting the test data were derived. In this paper, we used the newly derived equation and achieved less than 20% error in N₅₀ life for both designs, which is on par with Darveaux’s equations when used for BGAs. The analysis also revealed two factors that may account for the life improvement. First, a slight decrease in inelastic energy dissipation after enlarging the passivation opening. Second, the shift of the crack initiation location which leads to longer crack growth length for the new design. The second factor was also independently confirmed by the failure analysis.     

Dispersion characteristics of the broadside-coupled coplanarwaveguide

The dispersive properties for the even- and odd-modes of the broadside-coupled coplanar waveguide (CPW) are determined using the spectral domain method. Various numerical results of the even- and odd-mode effective dielectric constants as a function of frequency are presented and discussed. It is found that the structure has a very weak dispersion. This fact is further confirmed through a comparison between the calculated dynamic and quasi-static results of the even- and odd-mode effective dielectric constants. The low dispersion feature signifies the fact that the quasi-static analysis is adequate for designing practical microwave and millimeter-wave circuits employing broadside-coupled CPW     

On the effects of a spacecraft subcarrier unbalanced modulator

This paper presents mathematical models with associated analysis of the deleterious effects which a spacecraft's subcarrier unbalanced modulator has on the performance of a phase-modulated residual carrier communications link. The undesired spectral components produced by the phase and amplitude imbalances in the subcarrier modulator can cause (1) potential interference to the carrier tracking and (2) degradation in the telemetry bit signal-to-noise ratio (SNR). A suitable model for the unbalanced modulator is developed and the threshold levels of undesired components that fall into the carrier tracking loop are determined. The distribution of the carrier phase error caused by the additive White Gaussian noise (AWGN) and undesired component at the residual RF carrier is derived for the limiting cases. Further, this paper analyses the telemetry bit signal-to-noise ratio degradations due to undesirable spectral components as well as the carrier tracking phase error induced by phase and amplitude imbalances. Numerical results which indicate the sensitivity of the carrier tracking loop and the telemetry symbol-error rate (SER) to various parameters of the models are also provided as a tool in the design of the subcarrier balanced modulator.     

Substrate issues for the growth of mercury cadmium telluride

Close lattice matching and lattice compatibility with mercury cadmium telluride (MCT) make CdTe and related alloys ideal substrate materials for growth of MCT layers for the purpose of making high-performance second-generation infrared detectors. However, the limitations in the properties of CdTe and the difficulties in its bulk growth have prompted extensive research in the area of alternative substrates. Some basic relevant characteristics of substrates such as sapphire, GaAs, and silicon are compared and the possibilities and problems associated with each material are analyzed in the light of the most recent results in the field.     

Required bandwidth, unwanted emission, and data power efficiencyfor residual and suppressed carrier systems-a comparative study

This paper presents a new concept for required bandwidth along with a method for computing this bandwidth and the associated undesired emission for the classes of PCM/PSK/PM, PCM/PM and BPSK signals. The PCM/PSK/PM signals considered here employ either a square wave or sine-wave subcarrier with NRZ data format. On the other hand, the PCM/PM and BPSK signals use either a Bi-phase or an NRZ data format. Furthermore, the maximum allowable required bandwidth in the presence of noise and the data power efficiency for these modulation schemes will also be investigated. The term “data power efficiency” as considered in this paper consists of two principal components, namely, the amount of power contained in the data channel, and the symbol signal-to-noise ratio (SSNR) degradation due to the presence of intersymbol interference (ISI) for a specified required bandwidth. This paper evaluates both of these components numerically for the modulation schemes considered and the results are then compared. Furthermore, the impact of baseband filtering on the required bandwidth is also investigated in this paper     

New look on relay selection strategies for full-duplex multiple-relay NOMA over Nakagami-m fading channels

Wireless Networks - By removing the orthogonal use of radio-resources, non-orthogonal multiple access (NOMA) has been introduced to improve the spectral efficiency of fifth generation (5G) and...