Cathode properties of metal trifluorides in Li and Na secondary batteries

Fluorine compounds have high discharge voltage due to its highly ionic metal-ligand bonds. In them, perovskite-type metal trifluorides with corner sharing matrix have large bottlenecks of diffusion pathways for intercalants. Iron trifluoride composites (FeF₃-C) prepared by planetary ball milling with carbon showed reversible charge/discharge behavior not only for Li, but also for Na anodes. X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy were applied to characterize the electrochemical properties of FeF₃ vs. Li and Na anodes. The cathode performances of the other commercially available transition metal trifluorides such as MF₃ (M = Ti, V, Mn, Co) have been also investigated.     

Effect of static magnetic field on a thermal conductivity measurement of a molten droplet using an electromagnetic levitation technique

Recently, a novel method of measuring the thermophysical properties, particularly thermal conductivity, of high-temperature molten materials using the electromagnetic levitation technique has been developed by Kobatake et al. [H. Kobatake, H. Fukuyama, I. Minato, T. Tsukada, S. Awaji, Noncontact measurement of thermal conductivity of liquid silicon in a static magnetic field, Appl. Phys. Lett. 90 (2007) 094102]; this method is based on a periodic laser-heating method, and entails the superimposing of a static magnetic field to suppress convection in an electromagnetically levitated droplet. In this work, to confirm the fact that a static magnetic field really suppresses convection in a molten silicon droplet in an electromagnetic levitator, numerical simulations of convection in the droplet and periodic laser heating in the presence of convection have been carried out. Here, the convections driven by buoyancy force, thermocapillary force due to the temperature dependence of the surface tension on the melt surface, and electromagnetic force in the droplet were considered. As a result, it was found that applying a static magnetic field of 4 T can suppress convection in a molten silicon droplet enough to measure the real thermal conductivity of molten silicon.     

Introduction to olfactory neuroepithelium

Among the five senses, the sense of smell (olfaction) is the most sensitive and emotional window on the outside world (Stern and Marx, 1999). The olfactory system recognizes and discriminates myriad odorants of diverse molecular structures. What makes the olfactory system so specific and sensitive? OE harboring the olfactory receptor neurons (ORNs) also has an another unusual characteristic ability that fascinates scientists. Neurogenesis in this tissue continues throughout lifetime. This unique character provides an elegant model to study neurogenesis and neuronal plasticity, since neuronal birth, differentiation, survival, axon pathfinding, target recognition, synapse formation, and cell death can be examined in the mature OE. This special issue of Microscopic Research and Technique presents the recent developments in this exciting field of neuroscience, “structure and function of olfactory neuroepithelium.” Microsc. Res. Tech. 58:133–134, 2002. © 2002 Wiley-Liss, Inc.     

Coagulation mechanism of salt solution-extracted active component in Moringa oleifera seeds

This study focuses on the coagulation mechanism by the purified coagulant solution (MOC-SC-PC) with the coagulation active component extracted from M. oleifera seeds using salt solution. The addition of MOC-SC-PC tap water formed insoluble matters. This formation was responsible for kaolin coagulation. On the other hand, insoluble matters were not formed when the MOC-SC-PC was added into distilled water. The formation was affected by Ca2+ or other bivalent cations which may connect each molecule of the active coagulation component in MOC-SC-PC and form a net-like structure. The coagulation mechanism of MOC-SC-PC seemed to be an enmeshment of Kaolin by the insoluble matters with the net-like structure. In case of Ca2+ ion (bivalent cations), at least 0.2 mM was necessary for coagulation at 0.3 mgC l-1 dose of MOC-SC-PC. Other coagulation mechanisms like compression of double layer, interparticle bridging or charge neutralization were not responsible for the coagulation by MOC-SC-PC.     

Fundamental Limits of Organic Packages and Boards and the Need for Novel Ceramic Boards for Next Generation Electronic Packaging

The system-on-a-package (SOP) paradigm proposes a package level integration of digital, RF/analog and opto-electronic functions to address future convergent microsystems. Two major components of SOP fabrication are sequential build-up of multiple layers (4–8) of conducting copper patterns with interlayer dielectrics on a board and multiple ICs flip-chip bonded on the top layer. A wide range of passives, wave-guides and other RF and opto-electronic components buried within the dielectric layers provide the multiple functions on a single microminiaturized platform.The routing of future nanoscale ICs with 10,000+ I/Os require multiple build-up layers of ultra fine board feature sizes of 10 m lines/space widths and 40 m pad diameters. Current FR4 boards cannot achieve this build-up technology because of dimensional instability during processing. These boards also undergo high warpage during the sequential build-up process which limits the fine-line lithography and also causes misalignment between the vias and their corresponding landing pads. In addition, the CTE mismatch between the silicon die and the board leads to IC-package interconnect reliability concerns, particularly in future fine-pitch assemblies where underfilling becomes complicated and expensive.This work reports experimental and analytical work comparing the performance of organic and novel ceramic boards for SOP requirements. The property requirements as deduced from these results indicate that a high stiffness and tailorable CTE from 2–4 ppm/C is required to enable SOP microminiaturized board fabrication and assembly without underfill. A novel ceramic board technology is proposed to address these requirements.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

A Knowledge-Based Software Process Simulation Model

In this paper we propose a new software development process simulation model. The model can predict variations of productivity based on dynamic changes in the developer's knowledge structure. An important concept of the model is that a developer's productivity is influenced by the developer's knowledge. Moreover, a developer can acquire new knowledge by executing activities of a project. In other words, the developer's knowledge structure changes during the project. The knowledge structure is defined using a cognitive map that consists of knowledge elements and prerequisite relationships among the knowledge elements. By adding the specific developer's knowledge and the specific project workload to the knowledge structure, an increment of the developer's knowledge and the project progress are calculated into the model. The simulation results are useful for making project plans including technical reviews, which are an efficient technique for acquiring new knowledge. The simulation model can predict what knowledge should be discussed in the technical review, when the review should be held, and who the members of the review should be. The simulation results help managers make the most appropriate and executable project plan.     

Blockchain and smart contract architecture for notaries services under civil law: a Brazilian experience

International Journal of Information Security - This paper proposes a blockchain solution for some activities currently performed by notary offices under the Civil Law judiciary that is technically...     

High-Accuracy Analysis of Beams of Bimodulus Materials

Recently, several authors have treated the problems of bending of beams of bimodulus materials. The present paper, applies Levinson beam theory, which includes shear deformation and warping of the cross section, to bending analysis of thick rectangular beams with bimodulus materials. Many numerical results are obtained by use of the transfer matrix approach and compared with the methods of Bernoulli-Euler beam theory, Timoshenko beam theory, and Levinson beam theory with various boundaries. Also, the neutral-surface location and displacements for beams of bimodulus materials are calculated.     

Impedancemetric gas sensor based on Pt and WO3 co-loaded TiO2 and ZrO2 as total NOx sensing materials

Pt-loaded metal oxides [WO₃/ZrO₂, MO_x/TiO₂ (MO_x = WO₃, MoO₃, V₂O₅), WO₃ and TiO₂] equipped with interdigital Au electrodes have been tested as a NO_x (NO and NO₂) gas sensor at 500 °C. The impedance value at 4 Hz was used as a sensing signal. Among the samples tested, Pt-WO₃/TiO₂ showed the highest sensor response magnitude to NO. The sensor was found to respond consistently and rapidly to change in concentration of NO and NO₂ in the oxygen rich and moist gas mixture at 500 °C. The 90% response and 90% recovery times were as short as less than 5–10 s. The impedance at 4 Hz of the present device was found to vary almost linearly with the logarithm of NO_x (NO or NO₂) concentration from 10 to 570 ppm. Pt-WO₃/TiO₂ showed responses to NO and NO₂ of the same algebraic sign and nearly the same magnitude, while Pt/WO₃ and WO₃/TiO₂ showed higher response to NO than NO₂. The impedance at 4 Hz in the presence of NO for Pt-WO₃/TiO₂ was almost equal at any O₂ concentration examined (1–99%), while in the case of Pt/WO₃ and WO₃/TiO₂ the impedance increased with the oxygen concentration. The features of Pt-WO₃/TiO₂ are favorable as a NO_x sensor that can monitor and control the NO_x concentration in automotive exhaust. The effect of WO₃ loading of Pt-WO₃/ZrO₂-based sensor is studied to discuss the role of surface W-OH sites on the NO_x sensing.