A strain hardening failure assessment diagram derived from carbon-manganese steel compact tension specimens

A failure assessment diagram is derived from carbon-manganese steel compact tension specimens. The diagram has been determined from an elastic-plastic finite element analysis of a compact tension specimen geometry. The diagram has been validated by using experimental fracture toughness data obtained on the same steel and specimen geometry modelled in the finite element analysis. The plastic collapse load has been determined empirically for this geometry.It is shown that a non-work-hardening failure assessment diagram is not a good representation of the experimental data and that the computed failure assessment diagram is more appropriate for describing the behaviour of the carbon-manganese steel specimens.     

Toxicity of Detroit River Sediment-Bound Contaminants to Ultraplankton

Four sites in the Detroit River/Lake Erie western basin were evaluated for their toxicity. The evaluation was based on 1) bulk chemical characterization of the sediments, 2) chemical composition of the sediment elutriates, and 3) toxicity of the elutriates to ultraplankton and microplankton/net plankton. A sequence of decreasing contamination was determined from the chemical composition of the elutriates based on the elutriation release of metals such as Zn, Mn, Cd, Ni, and Co. Bioassessment of elutriate toxicity was determined by carbon-14 Algal Fractionation Bioassays (AFB's) which were conducted with various dilutions of standard and Chelex-100 treated elutriates. Site A (near Windsor, Ontario) and Site D (western Lake Erie) were found to be toxic to ultraplankton. The observed toxicity was attributed to the bioavailability and synergistic impact of elutriated metals on ultraplankton production. A direct relationship between the water soluble metal fraction and toxicity was observed. These results confirmed that sediment toxicity should not be evaluated solely on bulk chemical composition of the sediments. The AFB's have been proven useful in the bioassessment of sediments due to their rapidity/sensitivity and hence could be routinely used for the screening and early detection of contaminants affecting fast growing organisms which form the basis of the aquatic food chain.     

Single-sided ventilation — Part II. further considerations

This paper extends an earlier report of measurements and computer predictions of flows in a cubical cavity exposed on one side to the scavenging effect of an external stream. Further measurements and photographs are presented; they are consistent with each other and with the predictions of the computational model. Specifically, comparisons are made between measured and predicted mean velocities and turbulent shear stresses, and photographs are used to elucidate features of the shear layers generated by accelerating and decelerating external flows. The computer model is used to deduce approximate relations between internal turbulent activity (measured by mean velocity, turbulence energy and shear stress) and external velocity, percentage ‘window’ opening and relative position of the plane walls upstream and downstream of the cavity.     

Alternative market arrangements for technology transfer

With the rapid expansion of markets for telecommunications services and equipment, both national and international, one sees an increasing frequency of alliances in which each of two firms seeks to use the other to complete its portfolio strengths. Often this combination enables firms to achieve the product differentiation that seems to be the key to competitive advantage in modern telecommunications markets. This alliance may take the form of a « joint venture », which in the paper includes as limiting cases a subsidiary wholly owned by one firm, a technology licensing arrangement, and direct exporting. The model of such a venture presented here, although simple, is rich enough to illustrate the influence of four types of factors on the negotiations that set up the venture: demand, costs, risk, and regulatory constraints. We characterize the sets of acceptable and efficient arrangements, under various assumptions about exogeneous factors. The partners must choose among these by some form of bargaining.     

Fertilizer use saves fuels in India

Dung supplies are inadequate to provide enough farmyard manure (FYM) and cheap dung-cakes. Use of FYM necessitates supply of other fuels for cooking. Fertilizers consume only 5% of the thermal energy embodied in FYM. Replacement of the currently used amount of FYM by fertilizers will save fuels and costs. If all of the plant nutrients are to be supplied by FYM to a hectare of wheat crop, 2.9 tonnes of coal are needed to replace the dung-cakes lost; fertilizer use will save Rs. 1444/ha. It is suggested that FYM use be minimized and fertilizer use increased for fuel thrift.     

Comparison and Identification of Static Electrical Terminal Fuel Cell Models

Six steady-state fuel cell electrical terminal models are compared using experimental data from an Avista Laboratories SR-12 500 W proton exchange membrane (PEM) fuel cell. The paper begins by reviewing the physical effects in a fuel cell. The proposed electrical terminal models are introduced in terms of these physical effects, parameterized for identification and compared using the measured data.     

A chloride method for the determination of the enthalpy of steam/water mixtures discharged from geothermal wells

Chloride concentrations and pressures (or temperatures) in two points of a geothermal test line have been used to determine the enthalpy of the steam/water mixture discharged from Nisyros I geothermal well (Greece). The results are in agreement with those obtained by the Russell James method. The chloride method described in this paper is fast, requires cheap, portable equipment and is thus particularly suitable for short-term well testing during drilling or immediately after well completion, especially in steam-rich mixtures.