Fabrication of MOD-derived YBCO films on [001]LaAlO/sub 3/ and their application to /spl lambda//4 CPW SIR BPFs

Chemically derived epitaxial thin films of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) are fabricated on [001]LaAlO/sub 3/ substrates by the metalorganic-deposition (MOD) process, which has advantages of high quality, nonvacuum, low-cost, and large-scale production of high-T/sub c/ superconducting films. The MOD-derived YBCO films have a sharp transition at the critical temperature (90.4 K) and a high-quality film with a surface resistance of 0.13 m/spl Omega/ (30 K, 9.98 GHz) is obtained. As a microwave application, simple and compact bandpass filters (BPFs) using /spl lambda//4 coplanar-waveguide. stepped-impedance resonators are demonstrated on the YBCO films. A two-stage Chebyshev BPF of center frequency of 5.731 GHz, bandwidth of 135 MHz, and insertion loss of 0.29 dB with little input power dependency in a power range less than 10 dBm is realized on the film.     

Numerical analyses of high‐beta spherical tokamaks with varied elongation

The effect of plasma elongation on the second‐stable spherical tokamak (ST) was numerically studied using the experimentally measured pressure and current profiles of ultrahigh‐beta STs. The maximum beta of ST over 50% was obtained in the TS‐3 ST/CT experiment by applying an external toroidal field to an FRC. It was found that the marginal beta for the ballooning instability increased with the plasma elongation κ of ST. The elongated STs with κ > 2 have the magnetic shear (S)–pressure gradient (α) profiles located in the second‐stable regime for the ballooning mode and the stability margin increased with κ. The close relation between the absolute minimum‐B profile and the second stability was documented. The effect of elongation on maximum beta was observed to saturate when κ exceed 3, indicating that the optimized elongation for high‐beta STs is located around 2 < κ < 3. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 1–6, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20132     

980 nm compact optical isolators using Cd1-x-yMnxHgyTe single crystals for high power pumping laserdiodes

The author have developed compact optical isolators operating at 480 nm wavelength with an insertion loss of 1.0 dB, isolation of 30 dB, size of 4φ×4.5 mm and endurance against laser power of ~500 mW using Cd_1-x-yMn_xHg_yTe single crystals for the first time     

A 220-MHz pipelined 16-Mb BiCMOS SRAM with PLL proportionalself-timing generator

This 512 Kw×8 b×3 way synchronous BiCMOS SRAM uses a 2-stage wave-pipeline scheme, a PLL self-timing generator and a 0.4-μm BiCMOS process to achieve 220 MHz fully-random read/write operations with a GTL I/O interface. Newly developed circuit technologies include: 1) a zig-zag double word-line scheme, 2) a centered bit-line load layout scheme, and 3) a phase-locked-loop (PLL) with a multistage-tapped ring oscillator which generates a clock cycle proportional pulse (CCPP) and a clock edge lookahead pulse (CELP)     

Metallized ultra-shallow-junction device technology for sub-0.1μm gate MOSFET's

This paper describes a new ultra-thin SOI-CMOS structure offering reduced parasitic diffusion-layer resistance. It addresses ways to deal with the ultra-shallow junctions required by sub-0.1 μm MOSFET's. Based on a CVD tungsten process we experimentally investigate the characteristics of selectively grown tungsten used in the source and drain region made in SOI layers of various thicknesses ranging from 10 to 100 nm. We also investigate certain CMOS device characteristics. The SOI-CMOS structure, with low parasitic diffusion-layer resistance and good contact characteristics for ultra-shallow junction devices exhibits superior device performance and high scalability     

A light-transmitting two-dimensional photodetector array using a-Sipin photodiodes and poly-Si TFT's integrated on a transparent substrate

A light-transmitting two-dimensional photodetector array (32×32 cells) using amorphous silicon (a-Si) pin photodiodes and polysilicon (poly-Si) thin film transistors (TFT's) integrated on a transparent substrate has been developed for use in a free-space optical switching network. The fabrication and the characteristics of the photodetector array are discussed. With driving circuits and sensing amplifiers, this photodetector array shows a minimum detectable power of -25 dBm and an insertion loss of 0.4 dB for an incident optical beam with a diameter of 550 μm. By monitoring the positions and the states of input optical beams, this photodetector array can be used to control the optical paths in photonic switching systems, such as a 1024-input-port optical concentrator     

Intelligent manipulator system with nonsymmetric and redundant master-slave

Some work is so complicated and unsteady that it is not possible to use automatic robots, such as FA robots. In such a case, a teleoperated manipulation system is applied. In this research, the authors aim at a reduction in the operator's physical and mental burdens. An artificially intelligent manipulator system has been developed with nonsymmetric and redundant master-slave. This system has five features: (1) a polar coordinates master arm; (2) a highly operational articulated slave arm with 7 degrees of freedom; (3) a nonsymmetric configuration and different degrees of freedom master-slave control; (4) an expert system; and (5) a new master-slave control motion, which makes the operator's task easier with automatic force/position control. The system was experimentally produced and its performance tested and evaluated. A qualitative evaluation was carried out by conducting a comparative test on the conventional master-slave control and the new master-slave control. It was found to be effective in reducing operating time, as well as work-induced fatigue.     

The structure and maximal gain of CW-pumped GaP-AlGaP semiconductor Raman amplifier with tapers on both sides

GaP-AlGaP waveguide semiconductor Raman amplifiers (SRAs) tapered on both sides were fabricated by high-quality GaP-AlGaP liquid phase epitaxial growth using the temperature difference method with controlled vapor pressure (TDM-CVP), photolithography patterning, and reactive ion etching with PCl/sub 3/ gas. Although the finesse of the both-sides-tapered waveguide SRA is lower than previous values for straight or one-side-tapered waveguides, the CW-pumped gain was maximized, and a maximal gain of 4.2 dB was obtained. This letter presents the effect of tapered structures in SRA with CW pumping amplification.