Multilayered thermal barrier coating for land-based gas turbines

Multilayered thermal barrier coatings (TBC) with different functions were proposed for the hot section components of land-based gas turbines. This article describes a multilayered TBC with an oxidation resistant layer. A conventional duplex TBC and a triplex TBC, in which an aluminized layer was added to the conventional duplex TBC to increase oxidation resistance, were prepared. It was confirmed by a burner rig test that the triplex TBC with the aluminized layer is resistant to oxidation and shows high durability in a thermal cycle test, compared with the conventional duplex TBC. The spalling in the thermal cycle test of each TBC specimen occurred at the same position, when the thickness of the oxidation layer was 11 to 13 μm. The mechanism of spalling of the coating in the thermal cycle test was discussed in terms of stress in the coating. Stress in the direction of spalling occurred by an uneven interface between the bond and top coat and increased with growth of the oxidation layer. It is thought that the high durability of the triplex TBC in the thermal cycle test is derived from suppressing the growth of the oxidation layer and decreasing the stress due to the addition of the aluminized layer.     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.     

基于媒体独立切换并提供QoS保证的跨UMTS和WiMAX无线异构网络的网络切换方案

The rapid growth and innovation of the various mobile communication technologies have caused a change in the paradigm of internet access. Wireless technologies such as WiMAX, WiFi and UMTS/LTE networks have shown great potential in dominating the wireless access markets. The existence of various access technologies requires a means for seamless internetworking to provide anywhere, anytime services without interruption in the ongoing session, especially in multimedia applications with rigid Quality of Services (QoS) requirements. The IEEE 802.21 Media Independent Handover (MIH) working group was formed to develop a set of mechanisms under a standard framework with the capability to support migration of mobile users across heterogeneous networks. Therefore, the implementation of handover is extremely important in the heterogeneous network environment. In order to guarantee various QoS requirements during handover execution especially in multimedia applications, in this paper we propose a novel MIH-based capacity estimation algorithm to execute handover with QoS provision supporting both horizontal and vertical handovers across UMTS and WiMAX networks. Simulation shows that the proposed mechanism achieves lower call dropping rate (highest approximate 3% ) and higher system throughput (average 92% ) than the basic handover method does.     

Waveguide polarization-independent optical circulator

We fabricated a new type of waveguide polarization-independent optical circulator which does not need a polarization-beam splitter. The circulator is based on a non-reciprocal Mach-Zehnder interferometer which consists of two waveguide Faraday rotators, two thin-film half-waveplates and two planar lightwave circuit-type 3-dB couplers. The fabricated circulator provides a 14.0-23.7-dB isolation and a 3.0-3.3 dB insertion loss at λ=1.55 μm. This circulator presents a new possibility for developing non-reciprocal devices in the field of integrated optics     

A method to modify coordinates of detectors in positron emission tomography systems

A new method to modify coordinates of detectors in any positron emission tomography (PET) system using a radioactive point source is developed. This method is based on selecting a centered detector in each detector block of PET and measuring coincidence counts between the two centered detectors in opposite detector blocks to find the coordinates of their LOR (Line of Response). Due to slight misalignment of detector positions, measured LORs may not intersect at a single point. Based on the proposed method, the coordinates of detectors can be measured with very high accuracy and the coordinate of the center of the gantry (which is normally the same as the center of field of view) can be defined correctly. The results of the application of our method to a small animal PET system (FinePET), which was recently developed at Tohoku University, Japan, are shown here. The method is expected to contribute to the design and development of PET systems which can realize a very high spatial resolution of less than 1 mm FWHM.     

Numerical Study of the Performance of a Regenerative Furnace

In the present study, the numerical simulation of reactive turbulent flow and heat transfer in a regenerative gas-fired furnace has been carried out to investigate its performance. The effects of geometric and operating conditions on the performance of the furnace have also been studied. A moment closure method with an assumed g probability density function for mixture fraction is used in the present work to model the turbulent nonpremixed combustion process in the furnace. A comparison is made between the predicted results and the experimental data.     

High‐current lightning discharges in winter

Lightning electric‐field waveforms related to power line faults in winter have been identified. Most of those waveforms appear to be associated with upward lightning discharges with absolute peak currents of over 100 kA. They are quite different from common return‐stroke waveforms, and the lightning discharges which produce these characteristic waveforms are called GC (Ground to Cloud) flashes. These high‐current lightning discharges are distributed around the coastline in different ways depending on their polarities. The spatial distributions of high‐current lightning discharges around Japan are also investigated. It is revealed that the region of Honshu Island along the coastline of the Sea of Japan belongs to the area in which the density of high‐current lightning flashes is the highest in Japan through the year. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 8–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20874     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

Structural analysis and transistor properties of hetero-molecular bilayers

We examined the film morphologies and transistor properties of hetero-molecular bilayer consisting of N, N’-dioctyl-3, 4, 9, 10-perylenedicarboximide (PTCDI-C₈) and quaterrylene. First, the structure and carrier conduction of PTCDI-C₈ films were studied, followed by an analysis of the carrier accumulation process in a PTCDI-C₈/quaterrylene hetero-bilayer transistor. Based on the displacement current measurement (DCM), we stress the potential of the hetero-bilayer for tuning carrier accumulation like carrier doping techniques in field-effect transistors.