Implementation of genetic algorithm in an embedded microcontroller-based polarization control system

Implementation of genetic algorithm in a PIC32MX microcontroller-based polarization control system is proposed and demonstrated. The controller measures the signal intensity that is used to estimate the genetic value. This process is controlled by the genetic algorithm rather than referring to the Look-Up-Table as implemented in existing solutions. To reach optimum performance, the code is optimized by using the best genetic parameters so that the fastest execution time can be achieved. An ability of genetic algorithm to work efficiently in polarization control system possesses many advantages including easy code construction, low memory consumption and fast control speed. Genetic algorithm is intelligent enough to be used for endless polarization stabilization and in the worst case, able to stabilize the polarization changes in 300 μs. In the best case the response time can reach 17 μs.     

Rubber adhesion and the dwell time effect

In earlier studies of elastomer adhesion it has been found that the level of adhesion rises with increasing contact time for joined surfaces. Physical reasons for this dwell time effect are under debate. This paper describes an experimental study of the effect using the contact of optically smooth rubber surfaces pressed against glass. The study confirms the existence of the effect for a range of vulcanized rubber compounds; surface bloom appears to be strongly linked with it for the particular cases examined.     

Reduction of the Nitrate Content in Baby Spinach Leaves by Vacuum Impregnation with Sucrose

Vacuum impregnation (VI) has been widely utilized as a pre-treatment method prior to, e.g., the minimal processing, freezing, or drying of foods. In many cases, VI has been used to focus on the enrichment of fruits and vegetables with probiotics or micronutrients, texture enhancement, the modification of the sensory attributes, and extension of shelf life by pH reduction. However, little attention has been paid to the exploration of the metabolic consequences of VI that could lead to changes in the quality characteristics of plant tissues. Since nitrate has long been discussed as a compound that is harmful to human health, the aim of this investigation was to reduce the nitrate content in spinach leaves by feeding sucrose into the tissue using VI. The leaves, either non-treated or treated with VI, were stored under saturated humidity conditions and in darkness at 8 °C, for up to 72 h. VI-treated leaves showed a remarkable reduction in nitrate content as compared to the non-treated samples. Upon storage, sucrose was reduced, indicating that this sugar had been respired and had induced metabolization of the stored nitrate. The nitrite content of the treated leaves was unaffected, proving that this toxic compound was not accumulated in the baby spinach leaves upon external sucrose feeding.     

Analysis of fading statistics in cellular mobile communication systems

Spatial channel models are often proposed for modeling the angular aspects of mobile radio channel in picocell, microcell, and macrocellular environments. These models are validated through comparison with available measurement results. The comparisons are usually based on the fitness of their pdfs of angle of arrival to the histogram of occurrences of the signals over an angular span, given in the measurement data. This paper presents a comparison of the notable scattering models with various spatial channel measurements. The paper suggests criteria for the comparative analysis of the previously proposed spatial channel models and measurements on the basis of their fading statistics. Quantitative analysis of the considered models and the field measurements is also presented using multipath shape factors i.e. angle spread, the angular constriction and direction of maximum fading. Based on the obtained shape factors, fading statistics like level crossing rates, average fade duration, auto-covariance and coherence distance are evaluated. Effect of increasing Doppler spread on the level crossing rates and average fade duration is also elaborated in detail.     

Oxidation and Oxidative Bromination Reactions Catalyzed By a Reusable Polymer-Anchored Iron(III) Complex in Water at Room Temperature

A polymer-anchored iron(III) catalyst was synthesized and characterized. Its catalytic activity was evaluated for the oxidation of various alkenes, sulfides, aromatic alcohols and ethylbenzene with 30 % H₂O₂ as the oxidizing agent. The catalyst was also effective for the oxidative bromination reaction with 80–100 % selectivity of monobrominated products with H₂O₂/KBr at room temperature. The above reactions require a minimum amount of H₂O₂ and short reaction time. Most importantly, all the above reactions occur in aqueous medium. The catalyst can be facilely recovered and reused six-atimes without significant decrease in its activity and selectivity.     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Application of MIKE SHE modelling system to set up a detailed water balance computation

Estimation of total water balance is a substantial issue for watershed modelling in order to simulate the major components of the hydrological cycle to determine the stress of different anthropogenic activities on the available water resources within a catchment. In this context, the fully distributed physically based MIKE SHE modelling system was used to simulate the individual hydrological components of the total water balance for the Paya Indah Wetlands (PIW) watershed in the west of Peninsular Malaysia. Results reveal that the overall water balance is predominantly controlled by climate variables. Application of the model to the PIW watershed provides detailed estimation of the total water balance for a first‐order catchment in which actual evapotranspiration (ET) represents approximately 65 and 58%, while overland flow (OL) to the PIW lake system represents 12.38 and 12.3% of the total rainfall during the calibration and validation periods, respectively. The difference of the inflow and outflow was taken as storage in depth. Overall, the model gives a reasonable output of total error of less than 1% of the total rainfall, which in turn indicates that the interaction among components is satisfactorily sustained.     

Synthesis and physicochemical investigation of chitosan-built hydrogel with induced glucose sensitivity

There is an urgent need to treat diabetes, and therefore, this work reports on a chitosan-built hydrogel functionalized by a glucose sensing moiety, which simulates pancreatic activity. The effect of external stimuli on various internal properties was investigated to establish the action of the hydrogel. The model drugs, fluorescein (D1) and rhodamine (D2), with a diol architecture, were investigated spectroscopically with 75.94% loading and 65.63% release. Consequently, a ligand to glucose ratio of 2:1 in comparison with a ligand to model drug ratio of 1:1 was addressed. The system was expected to lead to findings on applications for the self-controlled release of insulin in response to blood glucose levels.     

Channel assignment mechanism for cognitive radio network with rate adaptation and guard band awareness: batching perspective

Wireless Networks - Cognitive radio (CR) is a promising technology that allows devices to effectively utilize the underutilized or unutilized portions of the licensed spectrum. In literature,...     

A new interval diagnosis method: Application to the spacecraft rendezvous phase of the Mars sample return mission

This paper presents a new optimized interval principal component analysis applied to detect and isolate actuators faults of an autonomous spacecraft involved in the rendezvous phase of the Mars sample return mission. Based on the exploitation of various arithmetic and interval analysis properties, the new interval model is built by solving the interval eigenpairs problem via a resolution of a parametric linear programming problem. The detection and isolation phases are performed by extending the classic methods to interval-valued data. The proposed method is applied to detect and isolate actuators faults that can occur on the spacecraft's thrusters. Based on data provided by a “high fidelity” industrial simulator developed by Thales Alenia Space, the obtained results proved the effectiveness of the proposed interval fault diagnosis method on detecting and isolating thrusters' faults.