Vibration control of an elastic strip by a singular force

Vibration characteristics of an elastic plate in the shape of an infinite strip are changed by applying a lateral concentrated force to the plate. The homogeneous, isotropic, elastic plate is infinite in the x-direction and the sides are simply supported. The size of the force is changed in proportion to the displacement measured at a certain point of the plate. The proportionality constant serves as the control parameter. The mathematical formulation of this distributed control problem and its analytical solution in terms of the vibration frequencies of the plate are given. The vibration frequencies are plotted as a function of the control parameter.     

Osteosclerosis due to endemic fluorosis

Endemic water borne fluorosis is a public health problem in Isparta, a city located in southern Turkey. In order to investigate the association between osteosclerosis and fluorosis, we retrospectively screened the results of lumbar spine and femur neck bone mineral density (BMD) of 1500 patients who were examined before, for any reason in between 2001-2003. Sixty nine patients (67 females and 2 males, mean age 52.6+/-10.2) with vertebra T-scores>or=+2 were found only except a patient with osteoid osteoma in the femur neck (femur T-score+6.64). Thirty-four of the patients could be reexamined with lateral vertebra BMD and investigated for fluorosis and the other etiologic causes of osteosclerosis. Of 34 patients, 14 had either mottled tooth enamel or urine fluoride level greater than 1.5 mg/l. Other etiologic causes were hypothyroidism (2), hypoparathyroidism (1), history of lumbar fracture (1), use of retinoids (1), vitamin D (7), oral calcium preparations (9), and bisphosphanates (3). Lateral lumbar vertebral T-score was greater than+2 in 12 patients (35.3%). Femur T-score was greater than+2 in 7 patients (20.6%). Fourteen patients (41.2%) had lateral vertebral or femur T-score>or=+2. Five (35.7%) of these patients had signs of fluorosis, as discussed before. Mean body mass index of individuals with fluorosis was 36.4+/-7.9 and this result was significantly higher than other osteosclerotic subjects (31.6+/-4.4). In conclusion we believe that approximately one third of the osteosclerosis in our region was due to endemic skeletal fluorosis and obesity may enhance this osteosclerotic type bone changes in endemic fluorosis.     

Low-power pipeline ADC for wireless LANs

In this paper, a 10-bit 40-MS/s analog-to-digital converter (ADC) is presented. A power consumption of 12 mW was achieved by using a time-interleaved and pipelined architecture with shared operational amplifiers. This circuit was fabricated in a 2.5-V 0.25-/spl mu/m technology with metal-oxide-metal capacitors. Experimental results are within design ranges and are in good agreement with simulation data. It turns out that the proposed Nyquist-rate ADC provides a potential solution for low-power high-speed applications, e.g., wireless LANs.     

Wideband HBT circuits for operation above 10 GHz and power supply voltages below 5 V

Single-stage and two-stage differential cascode amplifiers, and a 2:1 multiplexer, fabricated in InP/InGaAs HBT technology and powered from less than 5 V supplies, are presented. The amplifiers have typical DC gains of 21 and 33 dB, respectively, and unity-gain bandwidths in excess of 15 GHz, with approximately 20 dB gain at 10 GHz. The multiplexer was tested at rates up to 20 Gbit/s.<>     

A Unified Approach to Represent Metal Electrode Polarization

A unifying approach based on methods of linear and nonlinear systems engineering theory to conveniently analyze the metal electrode polarization is presented. The polarization phenomenon is modeled in the linear and nonlinear range. The linear model is based on an exentension of Bode's method consisting of a number of time constant distributions of the Davidson?Cole type. In the nonlinear range, the describing function method is used to analyze the interface in terms of a modified saturation element in cascade with a linear part. The linear part of the nonlinear model has the same form as the linear model with shorter "apparent" average time constants than the corresponding linear representation. The applicability of the method is illustrated using the platinum electrode data. However, the methodology is equally appropriate to the study of a wide class of interfacial and dielectric polarization phenomena characterized by a special dispersion behavior.     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Measurement of additional shear during sludge conditioning and dewatering

Optimum polymer dose is influenced both by the polymer demand of the sludge and the shear applied during conditioning. Sludge exposed to additional shear following conditioning will experience a decrease in cake solids concentration for the same polymer dose. Therefore, it is necessary to measure or quantify the additional shear in order to optimize the conditioning and dewatering. There is currently no direct or indirect method to achieve this. The main objective of this study was to develop a method based on torque rheology to measure the amount of shear that a sludge network experiences during conditioning and dewatering. Anaerobically digested sludge samples were exposed to increasing levels of mixing intensities and times, and rheological characteristics of samples were measured using a torque rheometer. Several rheological parameters were evaluated including the peak torque and totalized torque (area under the rheograms). The results of this study show that at the optimum polymer dose, a linear relationship exists between the applied shear and the area under the rheograms, and this relationship can be used to estimate an unknown amount of shear that the sludge was exposed to. The method is useful as a research tool to study the effect of shear on dewatering but also as an optimization tool in a dewatering automation system based on torque rheology.     

Low-methoxyl pectin–zeolite hydrogels controlling drug release promote in vitro wound healing

This study presents the design of novel hydrogel films, based on low-methoxyl (LM) pectin and NaA- or ZnA-zeolite particles, to serve as wound dressing materials with controlled drug delivery properties. We studied the effects of the preparation method of hydrogels, the amounts of crosslinker, drug and zeolite, and the type of cation in zeolites on the drug release mechanisms from the hydrogels. Ionic strengths of both film and external medium dictated the drug release behavior of the films, while the other parameters also played essential roles. NaA-zeolite hydrogels prepared using membrane diffusion controlled system, could reach a drug release ratio of 86% within 5 h. The drug-free hydrogels displayed no cytotoxicity while supporting cell proliferation and migration. Our cost-effective LM pectin–zeolite hydrogels promise to be effective wound dressing materials with controlled drug delivery ability, transparency, good swelling properties, ability to hold fluids, good oxygen transmission rate, and biocompatibility. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47640.     

In vitro cytotoxicity of monticellite based bioactive ceramic powder synthesized from boron derivative waste

The cytotoxicity of monticellite based bioactive ceramic powder, which was synthesized from boron derivative waste has been determined by in vitro assays of MTT, NRU, and JC-1 staining. The toxicity of powder on different mammalian cell lines (3T3-L1, HUVEC, CRL-2120) was evaluated at the concentrations of 10, 100, 200, 400 and 800?µg/mL to justify its potential for biomedical applications. The obtained results showed that monticellite based bioactive ceramic powder possesses not only bioactive feature but also biocompatible characteristic at the concentration range of 10–200?µg/mL. Hence, monticellite based bioactive ceramics have high potential as a bone graft substitute for bone void filling and coating applications.     

Association of physicochemical with technological properties of wheat

This study focused on twenty‐five different European common wheat varieties and aimed to identify correlations between the most important quality characteristics. When considering the physicochemical characteristics of the wheat samples, our results indicated that milling value is not correlated with vitreous kernel and test weight, but is correlated with gliadin/glutenin. The technological properties of the whole‐wheat flours estimated by means of Mixolab indicated rather good protein quality and the ability to form doughs with good stability in case of most of the samples. Technological behaviour of the flour was affected by dietary fibres and pentosan contents. The starch behaviour was positively correlated with the pentosan contents. The principal components analysis allowed establishing correlations between physicochemical, technological and nutritional parameters of wheat varieties. This finding is important for efficient selecting among wheat varieties, especially when healthy cereal‐based foods are desired.