Combustion synthesis of TiFe-based hydrogen storage alloy from titanium oxide and iron

In this paper, we describe the combustion synthesis of a TiFe-based hydrogen storage alloy from Fe and TiO₂ using metallic calcium as the reducing agent and heat source. The effects of hydrogen on the combustion ignition temperature and the hydrogenation properties of the products were examined. In the experiments, Fe, TiO₂, and Ca were mixed with a molar ratio of 1:1:4 and heated in a hydrogen atmosphere until the ignition due to the hydrogenation of calcium. For comparison, the same experiment was performed in an argon atmosphere. The ignition and maximum temperatures in the hydrogen atmosphere were drastically lower than those in the argon atmosphere. According to X-ray diffraction (XRD) analyses, all the peaks of the product combustion-synthesized in a hydrogen atmosphere were due to the TiFe phase, although some peaks of the product synthesized in argon indicated the existence of the TiO phase in addition to the TiFe phase. The product synthesized in hydrogen demonstrated a hydrogen storage capacity of 1.39 mass%, which is equal to that achieved using pure TiFe reagent. Moreover, a fine powdered product was obtained without any pulverization processes. This method creates an innovative production route for TiFe.     

Reconstruction of bone fenestration on mandiblar by the guided bone regeneration methods with beta-TCP/PLGC membranes

Guided Bone Regeneration (GBR) is a method for bone tissue regeneration. In this method, membranes are used to cover bone defects and to block the invasion of the surrounding soft tissues. It would provide sufficient time for the osteogenic cells from bone marrow to proliferate and form new bony tissues. In spite of the potential usefulness of this method, no appropriate materials for the GBR membrane have been developed. Here we design the ideal mechanical properties of the GBR membranes and created novel materials, which is the composite of beta-tricalcium phosphate (beta-TCP) and block copolymer of L-lactide, glycolide, and epsilon-caplolactone (PLGC). In the animal experiments with the use of the GBR membranes for large bone defects, we observed significant enhancement in the bone regeneration after 12 weeks implantation and proved the effectiveness of the materials.     

Self-watering system for arid area: A method to combat desertification

One of the reasons for the rapid expansion of arid or semiarid areas is that the decline in the ground water level makes it impossible for plants to get enough water. In order to provide water sustainably for plant life, a self-watering system has been developed. This self-watering system, designed to collect and store rainwater, dew and groundwater, reliably provides water to the surface vegetation. The system consists of two parts: one is the original soil and the other is soil which is replaced by finer soils. The results of laboratory model tests and numerical simulations showed that the system continuously raises the ground water to a level higher than the maximum capillary height of sandy ground without the requirement for any extra energy input. The stable operation of the system mainly depends on unsaturated hydraulic conductivity, the soil water retention curve and the shape and the size of the area of replaced soil. Because the original top soil reduces evaporation, soil salinization is minimal. The evaporation rate is negatively and exponentially correlated to the thickness of the covered original soil. Both the T-type system and suspension-type system have been shown to have a larger net capillary storage capacity than the original sandy ground, with a specific value dependent on the soil water retention curve. The rate of water movement in the T-type system is five to six times higher than that in the suspension-type system. The water content of coarser soil near the finer soil is larger than that of homogeneous coarser soil. The numerical simulation results were in good agreement with the model test, and a case study with various potential transpiration rates was conducted to evaluate the dynamic performance of the system.     

An automatic system using mobile-agent software to model the calculation process of a chemical vapor deposition film deposition simulator

We have developed an automatic modeling system for calculation processes of the simulator to reproduce experimental results of chemical vapor deposition (CVD), in order to decrease the calculation cost of the simulator. Replacing the simulator by the mathematical models proposed by the system will contribute towards decreasing the calculation costs for predicting the experimental results. The system consists of a mobile agent and two software resources in computer networks, that is, generalized modeling software and a simulator reproducing cross-sections of the deposited films on the substrates with the micrometer- or nanometer-sized trenches. The mobile agent autonomously creates appropriate models by moving to and then operating the software resources. The models are calculated by partial least squares regression (PLS), quadratic PLS (QPLS) and error back propagation (BP) methods using artificial neural networks (ANN) and expresses by mathematical formulas to reproduce the calculated results of the simulator. The models show good reproducibility and predictability both for uniformity and filling properties of the films calculated by the simulator. The models using the BP method yield the best performance. The filling property data are more suitable to modeling than film uniformity.     

Direct construction of an open-sandwich enzyme immunoassay for one-step noncompetitive detection of thyroid hormone T4

To establish a sensitive noncompetitive immunoassay for thyroxine (T4), we attempted to isolate anti-T4 antibodies from a phage display library based on a phagemid pDong1 ( Dong et al. Anal. Biochem.2009, 36, 386 ), which was designed to enable open-sandwich enzyme-linked immunosorbent assay (OS-ELISA) after selection on immobilized antigen. After the Fab-displaying phage library made from the splenocytes of T4-KLH immunized mice was subjected to biopanning on T4-BSA, two T4-specific clones were obtained. When they were assayed by indirect competitive ELISA, both clones showed low IC(50) (5-13 ng/mL), indicating their high affinity to T4. When they were used for OS-ELISA that detects antigen-dependency of the interaction between variable domains V(H) and V(L), a clone successfully detected 1 ng/mL of T4 with a working range superior to that of competitive IA. OS-ELISA was also performed with maltose binding protein (MBP)-fused V(H)/V(L) of this clone, which showed a detection limit less than 0.1 ng/mL T4. Moreover, the assay showed cross-reactivity with T3 similar to that of competitive ELISA, and also gave a reasonable total serum T4 concentration (90 ng/mL) from ethanol-extracted sample serum using the recombinant proteins. This is the first direct construction of an OS-ELISA system bypassing hybridoma, which will be applicable to the detection of many other small molecule antigens.     

Microstructure and properties of alumina-silicon carbide nanocomposites fabricated by pressureless sintering and post hot-isostatic pressing

Al2O3/5%SiC nanocomposites were fabricated by pressureless sintering using MgO as a sintering aid and then post hot-isostatic pressed (HIP), which can subsequently break through the disadvantage of hot-pressing process. The MgO additive was able to promote the densification of the composites, but could not induce the grain growth of Al2O3 matrix due to the grain growth inhibition by nano-sized SiC particles. After HIP treatment, Al2O3/SiC nanocomposites achieved full densification and homogeneous distribution of nano-sized SiC particles. Moreover, the fracture morphology of HIP treated specimens was identical with that of the hot-pressed Al2O3/SiC nanocomposites showing complete transgranular fracture. Consequently, high fracture strength of 1 GPa was achieved for the Al2O3/5%SiC nanocomposites by pressureless sintering and post HIP process.     

Residues of total mercury and methyl mercury in eel products

Fifty-two samples of broiled eels and broiled eel liver were analyzed for total mercury (total Hg) and methyl mercury. The mean concentrations of total Hg in broiled eels and broiled eel liver were 0.21 ppm and 0.10 ppm, respectively. Meanwhile, the mean concentrations of methyl mercury in broiled eels and broiled eel liver were 0.085 ppm and 0.039 ppm, respectively. The rate of methyl mercury to total Hg mainly ranged from 60 to 80% in broiled eels and from 35 to 65% in broiled eel liver. The total Hg concentrations of 2 samples of broiled eels and one sample of broiled eel liver exceeded the provisional regulation limit (0.4 ppm) of total Hg in fish in Japan. In these samples, the rates of methyl mercury to total Hg were lower than 20%. The muscles and the skin of broiled eels were measured separately. The ratios of skin to muscle concentration of total Hg and methyl mercury were mainly in the range from 1/10 to 1/4. The mean intakes of total Hg from broiled eels and broiled eel liver per individual were 24.6 microg and 3.1 microg, respectively. The mean intakes of methyl mercury from broiled eels and broiled eel liver per individual were 10.4 microg and 1.2 microg, respectively.     

Distribution of the sulfite resistance gene SSU1-R and the variation in its promoter region in wine yeasts

The SSU1-R gene provides high sulfite resistance to the wine yeast Y9-16B. In this study, we examined the distribution of this gene in 61 wine yeasts and 4 laboratory yeasts. We also analyzed the number of repeats of a 76-bp promoter sequence and its relationship to sulfite resistance. We found that the SSU1-R gene was present in 31 of the 61 wine yeasts. Furthermore, we found that the number of repeats in the promoter region of SSU1-R varied from two to six. Using RsaI, which cuts only once in the repeat, we suggested that the repeats all consisted of the 76-bp sequence. Finally, we found that there was a complex relationship between the number of repeats and sulfite resistance.     

Specific determination of bromate in bread by ion chromatography with ICP-MS

A sensitive method for detecting bromate in bread by ion chromatography with inductively-coupled plasma mass spectrometry (IC/ICP-MS) was developed. Bromate was extracted from bread with water. The clean-up procedure included a 0.2 micron filter, a C18 cartridge for defatting, a silver cartridge to remove halogen anions, a centrifugal ultrafiltration unit to remove proteins, and a cation-exchange cartridge to remove silver ions. A 500 microL sample solution was applied to IC/ICP-MS. The detection limit and the quantitation limit of bromate in the solution were 0.3 ng/mL and 1.0 ng/mL, expressed as HBrO3, respectively, which corresponded to 2 ng/g and 5 ng/g, respectively, in bread. Recovery of bromate was about 90%, and the CV was about 2%. Based on the detection limit in solution and recovery from bread, the detection limit of bromate in bread was estimated to be 2 ng/g.