Sawtooth-shaped stringiness with front frame formation for polyacrylic pressure-sensitive adhesives with two different molecular structures

The formation of sawtooth-shaped stringiness during 90° peeling was investigated using crosslinked poly(n-butyl acrylate–acrylic acid) and poly(2-ethylhexyl acrylate–acrylic acid) random copolymers with an acrylic acid content of 5 wt.% and different crosslinking degrees as pressure-sensitive adhesives (PSAs). The gel fraction was measured by toluene extraction of PSA, and it increased with crosslinker content for both systems. The observed stringiness was sawtooth-shaped, but there were three different types; both the typical sawtooth shape and the frame formed at the front tip with interfacial failure, and the sawtooth shape formed with cohesive failure. The change in the stringiness shape was affected strongly by the gel fraction of PSA. The peel rate under constant peel load was measured and revealed that the peel rate was lowest upon formation of the front frame type. A good relation was found between peel rate and peel strength, with a greater peel strength upon formation of the front frame type. The concentrated stress at the peeling tip is released by progress of peeling and deformation of the adhesive layer (stringiness) for no frame type. On the other hand, the sufficient interfacial adhesion delays the progress of peeling, and the applied larger stress causes cavitation in the PSA layer for front frame type. The formed cavity grows and the front frame type formed as a result. That is, internal deformation occurred preferentially over peeling. In order to improve the peel strength, the front frame type is the most useful stringiness shape.     

Influences of debonding rate and temperature on tack properties and peel behavior of polyacrylic block copolymer/tackifier system

The influences of debonding rate and temperature on the peel behavior of polyacrylic block copolymer/tackifier system were investigated. Poly(methyl methacrylate)-block-poly(n-butyl acrylate)-block-poly(methyl methacrylate) triblock copolymer (MAM) with hard block contents of 23 (MAM-23) and 16 wt.% (MAM-16) and a 1/1 blend with a diblock copolymer (MA) consisting of the same components (MAM-23/MA, total hard block content of 15 wt.%) were used as the base polymer. A special rosin ester was used as a tackifier at various contents in the block copolymer/tackifier system. The peeling process at the probe/adhesive interface during probe tack testing was observed using a high-speed microscope at 23 °C with debonding rate of 10 mm/s. Three different peeling mechanisms were observed. Type A, where peeling progressed linearly from the edge to the center of the probe without cavitation (MAM-23). Type B, where peeling progressed linearly from the edge to the center of the probe with cavitation (MAM-16). Type C, where cavitation occurred over the entire adhesive layer, and peeling initiation was delayed (MAM-23/MA). The peel behavior of MAM-23 changed from Type A to Type B with a decrease of the debonding rate (1 mm/s) or increase of the temperature (40 °C). In contrast, there was no change for MAM-16 and MAM-23/MA. Cavity formation in an adhesive layer restrains peeling; therefore, it is desirable for improvement of the adhesion strength. The tack properties increased with the tackifier content, and the formation of cavitation was less than that for the systems without the tackifier.     

Construction of an expression system of insect lysozyme lacking thermal stability: the effect of selection of signal sequence on level of expression in the Pichia pastoris expression system

Expression systems of human and silkworm lysozymes were constructedusing the methylotrophic yeast Pichia pastoris as a host. Theleader sequence and its prepro peptide of     

ATF site of human RB gene promoter is a responsive element of myogenic differentiation

RB mRNA increases during terminal differentiation of C2 myoblasts. We demonstrate that RB promoter activity increases about 4-fold during differentiation. The increase of RB promoter activity was reduced when a point mutation was designed in the ATF site. In a gel shift assay of the ATF site, two specific bands were observed. One of them, with the lower mobility, disappeared during differentiation. This band reacted with an antibody against ATF-1. We cotransfected an RB promoter-luciferase plasmid with the TREB36/ATF-1 plasmid. ATF-l suppressed the activity of the wild-type RB promoter but not of that with a point mutation at the ATF site. These results suggest that the ATF site of the RB promoter is a responsive element during myogenic differentiation of C2 cells. We hypothesize that RB promoter activity is stimulated partially due to the dissociation of ATF-1, which suppresses the promoter activity through the ATF site in C2 myoblasts.     

Clinical efficacy of imipenem/cilastatin sodium for respiratory infections in patients with lung cancer

Imipenem/cilastatin sodium (IPM/CS) was administered to 102 patients with respiratory tract infections and lung cancer. Patients with other serious diseases were excluded and a total of 73 patients were enrolled. They were divided into 12 patients who underwent surgery (operated group) and 61 who did not (non-operated group); the latter group included 28 patients treated with anticancer agents or radiation therapy (treated group) and 33 untreated patients (untreated group). IPM/CS was effective in 75% of the patients, both with and without surgery. The drug was effective in 81% of the treated group, although many of the patients had Stage III or more advanced cancer, as well as bronchial occlusion. IPM/CS was also effective in 69% of the untreated group, although many of the patients have serious infections and a PS (Performance Status) of 3 or greater. Thus, IPM/CS treatment achieved good results. Bacteriological studies showed that 3 out of 4 strains in the operated group and 16 out of 18 in the non-operated group were eliminated. Safety was evaluated in all patients. Two patients (2%) experienced side effects and two others (2%) showed abnormal clinical findings, but the symptoms were mild and resolved after discontinuation or completion of therapy. In conclusion, IPM/CS was very effective for treating respiratory infections in patients with lung cancer.     

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Metallurgical and Materials Transactions A - When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements...     

Influence of the degree of crosslinking on the stringiness of crosslinked polyacrylic pressure‐sensitive adhesives

The stringiness of crosslinked polyacrylic pressure‐sensitive adhesive (PSA) was observed during 90° peeling under the constant peel load. The random copolymer of butyl acrylate with 5 wt % acrylic acid crosslinked by N,N,N′,N′‐tetraglycidyl‐m‐xylenediamine was used as PSA. All observed stringiness upon peeling was sawtooth‐shaped, but it could be classified into three types dependent on the degree of crosslinking. The typical sawtooth‐shaped stringiness with interfacial failure was observed at the relatively higher crosslinker content ranging from 0.008 to 0.016 chemical equivalents (Eq.), where the PSA has high cohesive strength and low interfacial adhesion. The frame formed at the front end of stringiness at the content ranging from 0.002 to 0.004 Eq. Sufficient interfacial adhesion and deformability generate large internal deformation of the PSA layer. Internal deformation occurred preferentially over peeling as a result of front frame formation. The mode of peeling was changed from cohesive failure to interfacial failure in this range of crosslinker content. The sawtooth‐shaped with cohesive failure was observed at the lower content ranging from 0 to 0.001 Eq. The PSA has high interfacial adhesion and low cohesive strength, and thus exhibited cohesive failure. The PSA after peeling remained in the shape of belts. It was found that the shape of stringiness is strongly dependent on the balance between the interfacial adhesion and the cohesive strength of PSA. When the sawtooth‐shaped stringiness with frame formed, the peeling rate was lowest. This means the peel strength should be the maximum in this shape of stringiness. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40336.     

Carbon nanotube DNA sensor and sensing mechanism

We report the fabrication of single-walled carbon nanotube (SWNT) DNA sensors and the sensing mechanism. The simple and generic protocol for label-free detection of DNA hybridization is demonstrated with random sequence 15mer and 30mer oligonucleotides. DNA hybridization on gold electrodes, instead of on SWNT sidewalls, is mainly responsible for the acute electrical conductance change due to the modulation of energy level alignment between SWNT and gold contact. This work provides concrete experimental evidence on the effect of SWNT-DNA binding on DNA functionality, which will help to pave the way for future designing of SWNT biocomplexes for applications in biotechnology in general and also DNA-assisted nanotube manipulation techniques.     

A protein-encapsulation technique by the sol-gel method for the preparation of monolithic columns for capillary electrochromatography

A novel protein-encapsulation technique using sol-gels was developed for the preparation of monolithic capillary columns for capillary electrochromatography. Two chiral compounds, bovine serum albumin (BSA) and ovomucoid (OVM) from chicken egg white, were encapsulated in tetramethoxysilane-based hydrogel and their chiral selectivity was evaluated for the separation of some selected enantiomers (tryptophan, benzoin, eperisone, chlorpheniramine). The protein encapsulation was carried out within a capillary in a single step under mild conditions. The resultant monolithic columns showed adequate chromatographic performance, including mechanical strength, penetration of pressurized flow, and chiral separation. Two different proteins, BSA and OVM, were successfully encapsulated into the gel matrixes by changing the alkoxysilane compositions of the gel. Run-to-run repeatability was quite satisfactory. The consecutive analysis of the neutral compound, benzoin, by the OVM-encapsulated column showed good repeatability in the retention time (RSD = 1.23% for the first peak, N = 10). Under optimized conditions, the theoretical plate number for the first peak of benzoin reached 72,000 plates/m.