Copper(I) selenophene-2-carboxylate (CuSC) promoted C–S cross-coupling reaction of thiols with aryl iodides

We reported the synthesis of copper (I)-selenophene-2-carboxylate (CuSC) and application as new catalyst in the cross-coupling reactions of thiols with aryl iodide to afford the corresponding unsymmetrical thioethers. The optimized reaction conditions were applied to thiols and aryl iodides having a wide range of functional groups, including electron rich and electron poor substrates. The chemoselectivity of the reaction with 4-iodobromobenzene and 2-aminothiophenol derivatives was briefly examined through the competitive iodine versus bromine and thiol versus nitrogen cross-coupling.     

The Quality,Stability, and Bioactive Compound Composition of Virgin and Refined Organic Grape Seed Oil

Samples of virgin and refined organic grape seed oil were studied for their physicochemical quality, oxidative stability, and the bioactive compounds they contained. All of the samples were within the limits established by the Codex Alimentarius with regard to their quality parameters. Lutein, zeaxanthin, β‐carotene, α‐tocopherol, and catechin were the bioactive compounds analyzed, and the virgin oil afforded more significant results. No measurable amounts of zeaxanthin and β‐carotene were observed in the refined oil, most likely due to the refining process that was carried out at high temperatures. The oxidative stability index decreased with increasing temperature, whereas the air flow had no effect on the stability index. The optimal parameters for the oxidative stability are 80 °C and a flow rate of 15 L h^?1, and the virgin oil sample showed the best oxidative stability, possibly because it was not subjected to any treatment after extraction. The results from this study suggest that it would be preferable to consume virgin instead of refined grape oil because it is a better source of bioactive compounds and has a higher stability when heated.     

Influence of the chemical structure of additives poly(ethylene-co-vinyl acetate)-based on the pour point of crude oils

One of the methods to prevent wax precipitation, during petroleum production, transport, and refining, is the use of polymer additives that can reduce the oil pour point. However, no single additive work for all types of crude oil and this relation is not yet well known. In this study, a family of polymers based on poly(ethylene-co-vinyl acetate), containing hydroxyl groups and long pendant hydrocarbon chains (from C6 to C18), were synthesized and characterized by H¹ nuclear magnetic resonance and solubility test. Four crude oil samples containing different amounts and size distribution of the wax were used. The additive's action is favored by higher contents of iso + cycloalkanes and lower contents of n-paraffins with larger chain sizes. The presence of the CH₃COO group in the copolymers promoted the lowering of the pour point, supported by a low OH concentration and the presence of a long pendant hydrocarbon chain: the best results were obtained with C10 and C12 chain lengths. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48969.     

Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

Mechanical and dynamic mechanical properties of rice husk ash–filled natural rubber compounds

A laboratory‐sized two‐roll mill was used to incorporate rice husk ash into natural rubber (NR). A conventional vulcanization system was used for curing and cure studies were carried out on a Monsanto rheometer. Physical testing of the NR vulcanizates involved determining tensile and tear resistances and hardness. Swelling behavior of NR compounds and scanning electron microscopy were used to investigate the interaction between rice husk ash and natural rubber. Also, dynamical mechanical thermal analysis was used to assess filler–rubber interactions in terms of storage modulus (E′) and loss tangent (tan δ). For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N774), were also used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2331–2346, 2002     

Miscibility and morphology of poly(vinylidene fluoride)/poly[(vinylidene fluoride)‐ran‐trifluorethylene] blends

This study presents an investigation of the effect of the different crystalline phases of each blend component on miscibility when blending poly(vinylidene fluoride) (PVDF) and its copolymer poly[(vinylidene fluoride)‐ran‐trifluorethylene] [P(VDF–TrFE)] containing 72 mol % of VDF. It was found that, when both components crystallized in their ferroelectric phase, the PVDF showed a strong effect on the crystallinity and phase‐transition temperature of the copolymer, indicating partial miscibility in the crystalline state. On the other hand, immiscibility was observed when both components, after melting, were crystallized in their paraelectric phase. In this case, however, a decrease in crystallization temperatures suggested a strong interaction between monomers in the liquid state. Blend morphologies indicated that, in spite of the lack of miscibility in the crystalline state, there is at least miscibility between PVDF and P(VDF–TrFE) in the liquid state, and that a very intimate mixture of the two phases on the lamellar level can be maintained upon crystallization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1362–1369, 2002     

Synthesis and characterization of flexible polyoxadiazole films through cyclodehydration of polyhydrazides

Aiming to produce flexible films of poly(4,4′-diphenylether-1,3,4-oxadiazole), POD-DPE, the synthesis of POD-DPE through thermal cyclodehydration of polyhydrazide in solutions of poly(phosphoric acid), PPA, and in film form is studied here. It was observed that POD-DPE polymer samples obtained when the cyclodehydration of polyhydrazide is performed in solutions of PPA are insoluble in the solvents normally used for film preparation. On the other hand, the cyclodehydration of polyhydrazide in film form can lead to brittle POD-DPE films due to the high temperatures required for reaction to occur. In order to obtain flexible POD-DPE films with high conversion through cyclodehydration of polyhydrazide films, it is shown here that it is very important to adjust the cyclodehydration temperature (T_c) as a function of the glass transition temperature (T_g) and the weight average molecular weight (M_w) of the polyhydrazide. In all cases analyzed, polyhydrazides were synthesized by low temperature solution polycondensation reactions and were characterized by intrinsic viscosity measurements, size exclusion chromatograpy, nuclear magnetic resonance, infrared spectroscopy and thermal analysis. Polyhydrazides with weight average molecular weights up to 74,100 g/mol were obtained. The POD-DPE films obtained were characterized by infrared spectroscopy and nuclear magnetic resonance, showing that the production of POD-DPE films is indeed possible from cyclodehydration of polyhydrazide films.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Rice husk ash filled natural rubber. I. Overall rate constant determination for the vulcanization process from rheometric data

Black rice husk ash (BRHA) and white rice husk ash (WRHA) were incorporated into natural rubber (NR) using a laboratory‐size two‐roll mill. A conventional vulcanization system (CV) was chosen and cure studies were carried out on a TI‐100 Curometer. The torque curves were obtained at 150, 160, 170, and 180°C. The overall rate and the apparent activation energy for the vulcanization process were calculated for each compound assuming that vulcanization follows first‐order kinetics. For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N762), were also used. It was observed that addition of WRHA to NR compounds increased the cross‐linking rate and lowered the apparent activation energy more markedly than the other fillers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1194–1203, 2003     

The Influence of the Acid Sites on the Methylamines Synthesis with Cu-HZSM-5 Zeolite

There is a high industrial demand for MMA and DMA, however, the production of TMA is favored with the commercial catalysts. This work tested the methanol amination reaction with HZSM-5 and Cu/HZSM-5 zeolites (%Cu = 1.2, 3.7 and 6.0). Regarding the MMA selectivity, light differences were observed among Cu/HZSM-5 catalysts and pure zeolite, although the catalysts containing 3.7% copper was slightly more selective to MMA than the other metallic catalysts studied. From these results it is suggested that the metal loading present in the catalysts leads to a modification in the nature of the acidic sites, in particular, the selectivity depends on ratio Brönsted/Lewis acid sites. This modifications would facilitate the amines desorption during the reaction.