Note: Unshielded bilateral magnetoencephalography system using two-dimensional gradiometers

Magnetoencephalography (MEG) noninvasively measures neuronal activity with high temporal resolution. The aim of this study was to develop a new type of MEG system that can measure bilateral MEG waveforms without a magnetically shielded room, which is an obstacle to reducing both the cost and size of an MEG system. An unshielded bilateral MEG system was developed using four two-dimensional (2D) gradiometers and two symmetric cryostats. The 2D gradiometer, which is based on a low-T(c) superconducting quantum interference device and wire-wound pickup coil detects a magnetic-field gradient in two orthogonal directions, or ?/?x(?(2)B(z)/?z(2)), and reduces environmental magnetic-field noise by more than 50 dB. The cryostats can be symmetrically positioned in three directions: vertical, horizontal, and rotational. This makes it possible to detect bilateral neuronal activity in the cerebral cortex simultaneously. Bilateral auditory-evoked fields (AEF) of 18 elderly subjects were measured in an unshielded hospital environment using the MEG system. As a result, both the ipsilateral and the contralateral AEF component N100m, which is the magnetic counterpart of electric N100 in electroencephalography and appears about 100 ms after the onset of an auditory stimulus, were successfully detected for all the subjects. Moreover, the ipsilateral P50m and the contralateral P50m were also detected for 12 (67%) and 16 (89%) subjects, respectively. Experimental results demonstrate that the unshielded bilateral MEG system can detect MEG waveforms, which are associated with brain dysfunction such as epilepsy, Alzheimer's disease, and Down syndrome.     

Selective protein separation using siliceous materials with a trimethoxysilane-containing glycopolymer

A copolymer with α-D-mannose (Man) and trimethoxysilane (TMS) units was synthesized for immobilization on siliceous matrices such as a sensor cell and membrane. Immobilization of the trimethoxysilane-containing copolymer on the matrices was readily performed by incubation at high heat. The recognition of lectin by poly(Man-r-TMS) was evaluated by measurement with a quartz crystal microbalance (QCM) and adsorption on an affinity membrane, QCM results showed that the mannose-binding protein, concanavalin A, was specifically bound on a poly(Man-r-TMS)-immobilized cell with a higher binding constant than bovine serum albumin. The amount of concanavalin A adsorbed during permeation through a poly(Man-r-TMS)-immobilized membrane was higher than that through an unmodified membrane. Moreover, the concanavalin A adsorbed onto the poly(Man-r-TMS)-immobilized membrane was recoverable by permeation of a mannose derivative at high concentration.     

Nitrogen starvation induces expression of Lg‐FLO1 and flocculation in bottom‐fermenting yeast

When exponentially growing cells of bottom‐fermenting yeast were starved for nitrogen or were grown on proline (a non‐preferred nitrogen source), flocculation was induced. This flocculation was not induced by starvation for either carbon or amino acids. Expression of Lg‐FLO1, which is required for flocculation of bottom‐fermenting yeast, was also found to be induced by starvation for nitrogen. This suggests that the flocculation of bottom‐fermenting yeast is under the control of a nitrogen catabolite repression (NCR)‐like mechanism. Copyright © 2012 John Wiley & Sons, Ltd.     

Phase relations in the Fe-Pu-U ternary system

An isothermal section of the Fe-Pu-U ternary system at 650 °C was assessed in a previous study. In the present study, the predictions of the phase relations in the Fe-Pu-U system to higher and lower temperatures were performed by applying the interaction parameters determined at 650 °C. Differential thermal analysis (DTA) for the Fe-Pu-U alloys was also carried out to confirm the phase relations in the temperature region of 500 to 800 °C. Both results agreed well. On the basis of the predicted ternary phase diagram, the phase relations for a region surrounded by Fe₂Pu, Fe₂U, U, and Pu were described by a reaction scheme and a projection of the liquidus surface.     

A comparison of two-dimensional techniques for converting magnetocardiogram maps into effective current source distributions

The aim of this study was to develop a method for converting the pseudo two-dimensional current given by a current-arrow map (CAM) into the physical current. The physical current distribution is obtained by the optimal solution in a least mean square sense with Tikhonov regularization (LMSTR). In the current dipole simulation, the current pattern differences (ΔJ) between the results of the CAM and the LMSTR with several regularization parameters (α = 10(-1)-10(-15)) are calculated. In magnetocardiographic (MCG) analysis, the depth (z(d)) of a reconstruction plane is chosen by using the coordinates of the sinus node, which is estimated from MCG signals at the early p-wave. The ΔJs at p-wave peaks, QRS-complex peaks, and T-wave peaks of MCG signals for healthy subjects are calculated. Furthermore, correlation coefficients and regression lines are also calculated from the current values of the CAM and the LMSTR during p-waves, QRS-complex, and T-waves of MCG signals. In the simulation, the ΔJs (α ≈ 10(-10)) had a minimal value. The ΔJs (α = 10(-10)) at p-wave peaks, QRS-complex peaks, and T-wave peaks of MCG signals for healthy subjects also had minimal value. The correlation coefficients of the current values given by the CAM and the LMSTR (α = 10(-10)) were greater than 0.9. Furthermore, slopes (y) of the regression lines are correlated with the depth (z(d)) (r = -0.93). Consequently, the CAM value can be transformed into the LMSTR current value by multiplying it by the slope (y) obtained from the depth (z(d)). In conclusion, the result given by the CAM can be converted into an effective physical current distribution by using the depth (z(d)).     

Synthesis and optical properties of azobenzene side chain polymers derived from the bifunctional fumaric acid and itaconic acid

Three type polymers containing the same azobenzene side chain group with different backbone structures, poly(DMAz6Fm), poly(DMAz6It) and poly(MAz6Ac) derived respectively from fumaric acid, itaconic acid and acrylic acid, were synthesized. The dependence of photo-response properties on the polymeric architecture was investigated for the solutions and films. By irradiation of the linearly polarized light (436 nm), uniaxial orientations of the thin films were induced and anisotropic properties were investigated by measurements of the order parameters and birefringence values.     

On-off switching properties of one-dimensional photonic crystals consisting of azo-functionalized polymer liquid crystals having different methylene spacers and polyvinyl alcohol

In this paper, photoresponsive behavior of multi-bilayered films having precisely controlled layer thickness prepared by stacking an azo-functionalized polymer liquid crystal, PMAzXAc, and polyvinyl alcohol alternatively, PVA, is described. The multi-bilayered films were found to reflect a light of specific wavelength depending on the layer thickness and refractive index, and showed the reversible change in the reflection intensity by irradiation with visible and UV lights. The change in the reflection intensity was brought about by change in the molecular orientation of PMAzXAc between an out-of-plane orientation and a photo-induced isotropic state, and was strongly dependent on the number of methylene spacer of PMAzXAc linking the azobenzene side group with the acrylate polymer main chain. PMAz6Ac with hexa-methylene spacer showed the largest change in the reflection intensity, while smaller change in the reflection intensity was observed for PMAzXAc having shorter or longer methylene spacer than 6. The effect of the methylene spacers on the photochemical change in the molecular orientation of azobenzene chromophores in the multi-bilayered films will be discussed.     

Estimation of dynamic tensile strength of sandstone

A series of dynamic tests on Kimachi sandstone for measuring dynamic tensile strength are carried out using underwater shock waves. An emulsion explosive is used as the source of dynamic loading, and a pipe filled with water was arranged between the explosive and a cylindrical specimen. The length of the pipe is varied to produce different strengths of the incidence shock wave into the specimen. The velocity at the free end of the specimen and the position of a crack are observed using a laser vibration meter and a high-speed camera, respectively. A simple method of estimating dynamic tensile strength is proposed based on experimental results. The complete velocity profile at the free end without fracture information is completely constructed under a simple assumption. The point at which the crack may be markedly activated has been defined by the velocity profile at the free end as “the averaged fracture point”. Instead of the distance from the free end to the fracture position, the distance from the free end to the averaged fracture point is employed in estimating dynamic tensile strength. The dynamic tensile strength of Kimachi sandstone was obtained by an improved method within strain rates of 10–40 s⁻¹. This study has indicated that the dynamic tensile strength varies with strain rate to the 1/3 power.     

Sinusoidal endothelial cell damage by activated macrophages in rat liver necrosis

BACKGROUND: Massive hepatic necrosis caused by fibrin deposition in the hepatic sinusoids develops with hepatic macrophage activation in rats given endotoxin after administration of heat-killed Corynebacterium parvum. Targeted cells of such macrophages were investigated. METHODS: In C. parvum-treated rats, the pathological appearance of liver cells was serially measured in serum following endotoxin administration and compared with the appearance in the perfusate during closed liver perfusion with endotoxin. RESULTS: Serum activities of tumor necrosis factor, purine nucleoside phosphorylase present in both hepatocytes and sinusoidal endothelial cells, and levels of alanine aminotransferase were higher after 30 minutes, 1 hour, and 3 hours, respectively. Pretreatment of rats with gadolinium chloride, an inhibitor of macrophage function, reduced this liver injury. Although alanine aminotransferase activity remained almost unchanged in the liver perfusate, purine nucleoside phosphorylase activity increased. This increase was reduced when rats were pretreated with gadolinium chloride. There was sinusoidal endothelial cell damage around hepatic macrophages in the liver perfused with endotoxin. CONCLUSIONS: Activated hepatic macrophages may cause sinusoidal endothelial cell damage leading to hepatocyte necrosis in rats given C. parvum and endotoxin.     

Regulation of CD4 T cell reactivity to self and non-self

While the thymus may be effective in inducing tolerance to lymphoid associated antigens, it is not as efficient in deleting T cells reactive to peripheral tissue specific antigens. Therefore, to maintain self tolerance to peripheral tissues, post-thymic mechanisms must be invoked. One important way to prevent autoimmune pathology mediated by autoreactive CD4 T cells is the diversion of clones to regulatory Th2 effector cells. However, many different factors contribute in vivo to the decision of stimulated CD4 T cells to develop into Th1 versus Th2 cells. For example, T cell signaling pathways may influence the types of cytokines produced by naive T cells, and studies have provided evidence for a genetic polymorphism among common mouse strains that can significantly influence the early cytokine production in stimulated naive CD4 T cells. The allele carried by the BALB/c strain promotes IL-4 production, and consequently provides resistance to autoimmune diabetes in our transgenic mouse model. In addition, antigen presenting cells can influence the development of stimulated CD4 T cells in part through the production of cytokines such as IL-12. The absorption of IL-12 in vivo can permit the expansion of Th2 type effector cells, and this phenomenon will also protect mice from autoimmunity. Finally, the relative potency of various class II positive antigen presenting cell types can influence the development of autoreactive T cells, with dendritic cells apparently being the strongest stimulator of Th1 responses. Consistent with this notion, a relB knockout mouse, which is missing dendritic cells, appears to drive Th2 development even in response to viral infection. In sum, these various influences over the Th1/Th2 decision in vivo may provide new targets for immunotherapy of autoimmune diseases.